Mechanical structures for electrical and electronic equipment - Dimensions of mechanical structures of the 482,6 mm (19 in) series - Part 3-110: Residential racks and cabinets for smart houses

IEC 60297-3-110:2018 specifies dimensions, specification for installation, environmental aspects and safety aspect of residential racks and cabinets based on IEC 60297 series, for smart houses, likely to be part of smart cities. Key words: Racks, Residential, Cabinets, Smart house

Mechanische Bauweisen für elektrische und elektronische Einrichtungen – Maße der 482,6-mm-(19-in-)Bauweise - Teil 3-110: Gestelle und Schränke im Wohnbereich für intelligente Häuser

Structures mécaniques pour équipements électriques et électroniques - Dimensions des structures mécaniques de la série 482,6 mm (19 pouces) - Partie 3-110: Bâtis et baies domestiques pour maisons intelligentes

IEC 60297-3-110:2018 définit des spécifications d’installation et spécifie les dimensions, aspects liés à environnement et aspects liés à la sécurité des bâtis et baies domestiques sur la base de la série IEC 60297, pour les maisons intelligentes susceptibles de faire partie intégrante de villes intelligentes. Mots clés: bâtis, baies domestiques, maisons intelligentes

Mehanske konstrukcije za električno in elektronsko opremo - Mere mehanskih konstrukcij serije 482,6 mm (19 in) - 3-110. del: Stojala in omarice za stanovanjske pametne hiše (IEC 60297-3-110:2018)

Ta del standarda IEC 60297 določa dimenzije, specifikacije za namestitev, okoljske vidike ter varnostni vidik stanovanjskih stojal in omaric (na podlagi skupine standardov IEC 60297) za pametne hiše, ki so pogosto del pametnih mest.

General Information

Status
Published
Publication Date
25-Oct-2018
Current Stage
6060 - Document made available
Due Date
26-Oct-2018
Completion Date
26-Oct-2018

Buy Standard

Standard
EN IEC 60297-3-110:2019 - BARVE na PDF-str 23,24
English language
21 pages
sale 10% off
Preview
sale 10% off
Preview

e-Library read for
1 day

Standards Content (sample)

SLOVENSKI STANDARD
SIST EN IEC 60297-3-110:2019
01-januar-2019
0HKDQVNHNRQVWUXNFLMH]DHOHNWULþQRLQHOHNWURQVNRRSUHPR0HUHPHKDQVNLK

NRQVWUXNFLMVHULMHPP LQ GHO6WRMDODLQRPDULFH]DVWDQRYDQMVNH

SDPHWQHKLãH ,(&

Mechanical structures for electrical and electronic equipment - Dimensions of mechanical

structures of the 482,6 mm (19 in) Series - Part 110: residential racks and cabinets for

smart houses (IEC 60297-3-110:2018)
Mechanische Bauweisen für elektrische und elektronische Einrichtungen – Maße der
482,6-mm-(19-in-)Bauweise - Teil 3-110: Gestelle und Schränke im Wohnbereich für
intelligente Häuser (IEC 60297-3-110:2018)

Structures mécaniques pour équipements électriques et électroniques - Dimensions des

structures mécaniques de la série 482,6 mm (19 pouces) - Partie 3-110: Bâtis et baies

domestiques pour maisons intelligentes (IEC 60297-3-110:2018)
Ta slovenski standard je istoveten z: EN IEC 60297-3-110:2018
ICS:
31.240 Mehanske konstrukcije za Mechanical structures for
elektronsko opremo electronic equipment
SIST EN IEC 60297-3-110:2019 en

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
SIST EN IEC 60297-3-110:2019
---------------------- Page: 2 ----------------------
SIST EN IEC 60297-3-110:2019
EUROPEAN STANDARD EN IEC 60297-3-110
NORME EUROPÉENNE
EUROPÄISCHE NORM
October 2018
ICS 31.240
English Version
Mechanical structures for electrical and electronic equipment -
Dimensions of mechanical structures of the 482,6 mm (19 in)
series - Part 3-110: Residential racks and cabinets for smart
houses
(IEC 60297-3-110:2018)

Structures mécaniques pour équipements électriques et Mechanische Bauweisen für elektrische und elektronische

électroniques - Dimensions des structures mécaniques de Einrichtungen - Maße der 482,6-mm-(19-in-)Bauweise - Teil

la série 482,6 mm (19 pouces) - Partie 3-110: Bâtis et baies 3-110: Gestelle und Schränke im Wohnbereich für

domestiques pour maisons intelligentes intelligente Häuser
(IEC 60297-3-110:2018) (IEC 60297-3-110:2018)

This European Standard was approved by CENELEC on 2018-09-19. CENELEC members are bound to comply with the CEN/CENELEC

Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.

Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC

Management Centre or to any CENELEC member.

This European Standard exists in three official versions (English, French, German). A version in any other language made by translation

under the responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the

same status as the official versions.

CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic,

Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,

Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden,

Switzerland, Turkey and the United Kingdom.
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels

© 2018 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members.

Ref. No. EN IEC 60297-3-110:2018 E
---------------------- Page: 3 ----------------------
SIST EN IEC 60297-3-110:2019
EN IEC 60297-3-110:2018 (E)
European foreword

The text of document 48D/668/FDIS, future edition 1 of IEC 60297-3-110, prepared by SC 48D

"Mechanical structures for electrical and electronic equipment" of IEC/TC 48 "Electrical connectors

and mechanical structures for electrical and electronic equipment" was submitted to the IEC-

CENELEC parallel vote and approved by CENELEC as EN IEC 60297-3-110:2018.
The following dates are fixed:

• latest date by which the document has to be implemented at national (dop) 2019-06-19

level by publication of an identical national standard or by endorsement

• latest date by which the national standards conflicting with the (dow) 2021-09-19

document have to be withdrawn

Attention is drawn to the possibility that some of the elements of this document may be the subject of

patent rights. CENELEC shall not be held responsible for identifying any or all such patent rights.

Endorsement notice

The text of the International Standard IEC 60297-3-110:2018 was approved by CENELEC as a

European Standard without any modification.
---------------------- Page: 4 ----------------------
SIST EN IEC 60297-3-110:2019
EN IEC 60297-3-110:2018 (E)
Annex ZA
(normative)
Normative references to international publications
with their corresponding European publications

The following documents are referred to in the text in such a way that some or all of their content

constitutes requirements of this document. For dated references, only the edition cited applies. For

undated references, the latest edition of the referenced document (including any amendments)

applies.

NOTE 1 Where an International Publication has been modified by common modifications, indicated by (mod), the relevant

EN/HD applies.

NOTE 2 Up-to-date information on the latest versions of the European Standards listed in this annex is available here:

www.cenelec.eu.
Publication Year Title EN/HD Year

IEC 60297-3-100 - Mechanical structures for electronic equipment EN 60297-3-100 -

- Dimensions of mechanical structures of the
482,6 mm (19 in) series - Part 3-100: Basic
dimensions of front panels, subracks, chassis,
racks and cabinets
IEC 60917-1 - Modular order for the development of EN 60917-1 -
mechanical structures for electronic equipment
practices - Part 1: Generic standard
IEC 60917-2-5 - Modular order for the development of EN 60917-2-5 -
mechanical structures for electronic equipment
practices - Part 2-5: Sectional specification -
Interface co-ordination dimensions for the 25
mm equipment practice - Cabinet interface
dimensions for miscellaneous equipment
IEC 61587-1 - Mechanical structures for electronic equipment EN 61587-1 -
- Tests for IEC 60917 and IEC 60297 series -
Part 1: Environmental requirements, test set-up
and safety aspects for cabinets, racks,
subracks and chassis under indoor condition
use and transportation
IEC 61587-2 - Mechanical structures for electronic equipment EN 61587-2 -
- Tests for IEC 60917 and 60297 - Part 2:
Seismic tests for cabinets and racks
IEC 61587-3 - Mechanical structures for electronic equipment EN 61587-3 -
- Tests for IEC 60917 and IEC 60297 - Part 3:
Electromagnetic shielding performance tests for
cabinets and subracks
---------------------- Page: 5 ----------------------
SIST EN IEC 60297-3-110:2019
---------------------- Page: 6 ----------------------
SIST EN IEC 60297-3-110:2019
IEC 60297-3-110
Edition 1.0 2018-08
INTERNATIONAL
STANDARD
NORME
INTERNATIONALE
colour
inside
Mechanical structures for electrical and electronic equipment – Dimensions of
mechanical structures of the 482,6 mm (19 in) series –
Part 3-110: Residential racks and cabinets for smart houses
Structures mécaniques pour équipements électriques et électroniques –
Dimensions des structures mécaniques de la série 482,6 mm (19 pouces) –
Partie 3-110: Bâtis et baies domestiques pour maisons intelligentes
INTERNATIONAL
ELECTROTECHNICAL
COMMISSION
COMMISSION
ELECTROTECHNIQUE
INTERNATIONALE
ICS 31.240 ISBN 978-2-8322-5905-4

Warning! Make sure that you obtained this publication from an authorized distributor.

Attention! Veuillez vous assurer que vous avez obtenu cette publication via un distributeur agréé.

® Registered trademark of the International Electrotechnical Commission
Marque déposée de la Commission Electrotechnique Internationale
---------------------- Page: 7 ----------------------
SIST EN IEC 60297-3-110:2019
– 2 – IEC 60297-3-110:2018 © IEC 2018
CONTENTS

FOREWORD ........................................................................................................................... 3

INTRODUCTION ..................................................................................................................... 5

1 Scope .............................................................................................................................. 6

2 Normative references ...................................................................................................... 6

3 Terms and definitions ...................................................................................................... 6

4 Arrangement overview ..................................................................................................... 7

5 Dimensions...................................................................................................................... 8

5.1 Dimensions for residential racks ............................................................................. 8

5.2 Dimensions for residential cabinets ....................................................................... 10

6 Equipment categories and the relevant mounting locations ............................................ 11

7 Installation and fixing position ........................................................................................ 12

7.1 Installation ............................................................................................................ 12

7.1.1 Installation of residential racks ...................................................................... 12

7.1.2 Installation of residential cabinets .................................................................. 13

7.2 Fixing positions ..................................................................................................... 13

8 Environmental aspects .................................................................................................. 15

8.1 General ................................................................................................................. 15

8.2 Environmental protection performance level .......................................................... 15

9 Safety aspects ............................................................................................................... 15

Annex A (informative) Application examples of the residential rack and cabinet for

smart houses under local construction regulations ................................................................ 16

A.1 Applications of residential racks and cabinets for smart houses under local

construction regulations or guides ......................................................................... 16

A.2 An application example of the residential rack under a local construction

regulation .............................................................................................................. 16

A.3 An application example of the residential cabinet under a local home-

network construction guide ................................................................................... 17

Figure 1 – Example of a residential rack arrangement for a smart house ................................ 7

Figure 2 – Example of a residential cabinet arrangement for a smart house ............................ 8

Figure 3 – Dimensions of residential racks .............................................................................. 9

Figure 4 – Dimensions of residential cabinets ....................................................................... 10

Figure 5 – Typical equipment categories and their mounting locations of a 2 000 mm

high (40U) residential rack or cabinet .................................................................................... 12

Figure 6 – Fixing positions of residential racks or cabinets.................................................... 14

Figure A.1 – An application example of the residential rack under a local construction

regulation ............................................................................................................................. 17

Figure A.2 – An application example of the residential cabinet under a local home-

network construction guide ................................................................................................... 18

Table 1 – Dimensions of residential racks ............................................................................... 9

Table 2 –Dimensions of residential cabinets ......................................................................... 11

Table 3 – Environmental protection performance level .......................................................... 15

---------------------- Page: 8 ----------------------
SIST EN IEC 60297-3-110:2019
IEC 60297-3-110:2018 © IEC 2018 – 3 –
INTERNATIONAL ELECTROTECHNICAL COMMISSION
____________
MECHANICAL STRUCTURES FOR
ELECTRICAL AND ELECTRONIC EQUIPMENT –
DIMENSIONS OF MECHANICAL STRUCTURES
OF THE 482,6 MM (19 IN) SERIES –
Part 3-110: Residential racks and cabinets for smart houses
FOREWORD

1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising

all national electrotechnical committees (IEC National Committees). The object of IEC is to promote

international co-operation on all questions concerning standardization in the electrical and electronic fields. To

this end and in addition to other activities, IEC publishes International Standards, Technical Specifications,

Technical Reports, Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC

Publication(s)”). Their preparation is entrusted to technical committees; any IEC National Committee interested

in the subject dealt with may participate in this preparatory work. International, governmental and non-

governmental organizations liaising with the IEC also participate in this preparation. IEC collaborates closely

with the International Organization for Standardization (ISO) in accordance with conditions determined by

agreement between the two organizations.

2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international

consensus of opinion on the relevant subjects since each technical committee has representation from all

interested IEC National Committees.

3) IEC Publications have the form of recommendations for international use and are accepted by IEC National

Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC

Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any

misinterpretation by any end user.

4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications

transparently to the maximum extent possible in their national and regional publications. Any divergence

between any IEC Publication and the corresponding national or regional publication shall be clearly indicated in

the latter.

5) IEC itself does not provide any attestation of conformity. Independent certification bodies provide conformity

assessment services and, in some areas, access to IEC marks of conformity. IEC is not responsible for any

services carried out by independent certification bodies.

6) All users should ensure that they have the latest edition of this publication.

7) No liability shall attach to IEC or its directors, employees, servants or agents including individual experts and

members of its technical committees and IEC Na
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.