EN 62271-3:2015

High-voltage switchgear and controlgear - Part 3: Digital interfaces based on IEC 61850

IEC 62271-3:2015 is applicable to high-voltage switchgear and controlgear for all rated voltage levels above 1 kV and assemblies thereof and specifies equipment for digital communication with other parts of the power utility automation and its impact on testing. This equipment for digital communication, replacing metal parallel wiring, can be integrated into the high-voltage switchgear, controlgear, and assemblies thereof, or can be external equipment in order to provide compliance for existing switchgear and controlgear and assemblies thereof with the standards of the IEC 61850 series. This second edition cancels and replaces the first edition published in 2006. This edition constitutes a technical revision. This edition includes the following significant technical changes with respect to the previous edition: a) an update to the latest edition(s) of IEC 61850 series; (e.g. Annex B "LNs for sensors and monitoring" of edition 1 has been deleted since these LNs are now covered by standard IEC 61850-7-4:2010) b) an update of normative references; c) the minimum voltage range this standard refers to, was changed from 72,5 kV to above 1 kV; d) the description of performance tests and conformance tests became more specific; e) the new - informative - Annex C gives an example for performance type testing; f) 6.2.3 "transmission systems" as well as appropriate subclauses have been superseded by standard IEC TR 61850-90-4:2013; g) fibre optical connector type LC becomes only recommended type of fibre optic connector in accordance with IEC TR 61850-90-4:2013; h) electronic nameplates have been redefined as extension of LN XCBR and LN XSWI with data objects, reflecting required additional name plate information.

Hochspannungs-Schaltgeräte und -Schaltanlagen - Teil 3: Digitale Schnittstellen nach IEC 61850

Appareillage à haute tension - Partie 3: Interfaces numériques basées sur l'IEC 61850

L'IEC 62271-3:2015 s'applique aux appareillages à haute tension pour tous les niveaux de tension assignée supérieurs à 1 kV et à leurs assemblages et spécifie l'équipement destiné à la communication numérique avec d'autres parties du système d'automatisation de poste électrique et son impact sur les essais. Cet équipement de communication numérique, remplaçant le traditionnel câblage cuivre parallèle, peut être intégré dans l'appareillage à haute tension et dans ses assemblages ou peut être un équipement externe destiné à assurer la conformité des appareillages existants et de leurs assemblages avec les normes de la série IEC 61850. Cette deuxième édition annule et remplace la première édition, parue en 2006. Cette édition constitue une révision technique. Cette édition inclut les modifications techniques majeures suivantes par rapport à l'édition précédente: a) une mise à jour de la ou des dernières éditions de la série IEC 61850; (par exemple l'Annexe B "Noeuds logiques pour les capteurs et la surveillance" de l'édition 1 a été supprimée car ces noeuds logiques sont désormais couverts par la norme IEC 61850-7-4:2010) b) une mise à jour des références normatives; c) la plage de tension minimale à laquelle se réfère la présente norme a été modifiée de 72,5 kV à plus de 1 kV; d) la description des essais de qualification et des essais de conformité est devenue plus spécifique; e) la nouvelle Annexe C (informative) donne un exemple d'essai de type de qualification; f) le 6.2.3 "Systèmes de transmission" et les paragraphes correspondants ont été remplacés par l'IEC TR 61850-90-4:2013; g) le type de connecteur pour fibres optiques LC devient le seul type recommandé de connecteur pour fibres optiques conformément à l'IEC TR 61850-90-4:2013; h) les plaques signalétiques électroniques ont été redéfinies comme une extension du noeud logique XCBR et du noeud logique XSWI avec des objets de données, reflétant les informations supplémentaires exigées relatives à la plaque signalétique.

Visokonapetostne stikalne in krmilne naprave - 3. del: Digitalni vmesniki, ki temeljijo na IEC 61850 (IEC 62271-3:2015)

General Information

• Status: Published
• Publication Date: 30-Apr-2015
• Withdrawal Date: 13-Apr-2018
• ICS: 29.130.10 - High voltage switchgear and controlgear
• Technical Committee: CLC/TC 17AC - High-voltage switchgear and controlgear
• Drafting Committee: IEC/TC 17 - IEC_TC_17
• Current Stage: 6060 - Document made available - Publishing
• Start Date: 01-May-2015
• Completion Date: 01-May-2015
• Ref Project: SIST EN 62271-3:2015 - High-voltage switchgear and controlgear -- Part 3: Digital interfaces based on IEC 61850

Relations

• Replaces: EN 62271-3:2006 - High-voltage switchgear and controlgear - Part 3: Digital interfaces based on IEC 61850
• Effective Date: 28-Jan-2023

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN 62271-3:2015
01-junij-2015
1DGRPHãþD
SIST EN 62271-3:2007
Visokonapetostne stikalne in krmilne naprave - 3. del: Digitalni vmesniki, ki
temeljijo na IEC 61850 (IEC 62271-3:2015)
High-voltage switchgear and controlgear -- Part 3: Digital interfaces based on IEC 61850
Appareillage à haute tension -- Partie 3: Interfaces numériques basées sur la CEI 61850
Ta slovenski standard je istoveten z: EN 62271-3:2015
ICS:
29.130.10 Visokonapetostne stikalne in High voltage switchgear and
krmilne naprave controlgear
35.200 Vmesniška in povezovalna Interface and interconnection
oprema equipment
SIST EN 62271-3:2015 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN 62271-3:2015

---------------------- Page: 2 ----------------------

SIST EN 62271-3:2015


EUROPEAN STANDARD EN 62271-3

NORME EUROPÉENNE

EUROPÄISCHE NORM
May 2015
ICS 29.130.10 Supersedes EN 62271-3:2006
English Version
High-voltage switchgear and controlgear - Part 3: Digital
interfaces based on IEC 61850
(IEC 62271-3:2015)
Appareillage à haute tension - Partie 3: Interfaces Hochspannungs-Schaltgeräte und -Schaltanlagen -
numériques basées sur l'IEC 61850 Teil 3: Digitale Schnittstellen nach IEC 61850
(IEC 62271-3:2015) (IEC 62271-3:2015)
This European Standard was approved by CENELEC on 2015-04-14. CENELEC members are bound to comply with the CEN/CENELEC
Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC
Management Centre or to any CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the
same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic,
Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and the United Kingdom.


European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2015 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members.
 Ref. No. EN 62271-3:2015 E

---------------------- Page: 3 ----------------------

SIST EN 62271-3:2015
EN 62271-3:2015 - 2 -
Foreword
The text of document 17C/617/FDIS, future edition 2 of IEC 62271-3, prepared by
SC 17C "High-voltage switchgear and controlgear assemblies" of IEC/TC 17 "Switchgear and
controlgear" was submitted to the IEC-CENELEC parallel vote and approved by CENELEC as
EN 62271-3:2015.

The following dates are fixed:
• latest date by which the document has to be (dop) 2016-01-14
implemented at national level by
publication of an identical national
standard or by endorsement
(dow) 2018-04-14
• latest date by which the national
standards conflicting with the
document have to be withdrawn

This document supersedes EN 62271-3:2006.

Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CENELEC [and/or CEN] shall not be held responsible for identifying any or all such
patent rights.

Endorsement notice
The text of the International Standard IEC 62271-3:2015 was approved by CENELEC as a European
Standard without any modification.
In the official version, for Bibliography, the following notes have to be added for the standards indicated:

1)
IEC 60265 Series NOTE Harmonized as EN 60265 Series .
IEC 60794 Series NOTE Harmonized as EN 60794 Series.
IEC 61754-20:2012 NOTE Harmonized as EN 61754-20:2012 (not modified).
IEC 61850-6:2009 NOTE Harmonized as EN 61850-6:2010 (not modified).
IEC 61850-7-1:2011 NOTE Harmonized as EN 61850-7-1:2011 (not modified).
IEC 61850-7-410:2012 NOTE Harmonized as EN 61850-7-410:2013 (not modified).
IEC 61850-7-420:2009 NOTE Harmonized as EN 61850-7-420:2009 (not modified).
2) 2)
IEC 61869-9 NOTE Harmonized as EN 61869-9 (not modified).
IEC 62271-102:2001 NOTE Harmonized as EN 62271-102:2002 (not modified).
IEC 62271-102:2001/A1:2011 NOTE Harmonized as EN 62271-102:2002/A1:2011 (not modified).
IEC 62271-102:2001/A2:2013 NOTE Harmonized as EN 62271-102:2002/ A2:2013 (not modified).
IEC 62271-1
...