EN 61202-1:2009
(Main)Fibre optic interconnecting devices and passive components - Fibre optic isolators - Part 1: Generic specification
Fibre optic interconnecting devices and passive components - Fibre optic isolators - Part 1: Generic specification
IEC 612021-1:2009 applies to isolators used in the field of fibre optics which are non-reciprocal optical devices, passive components and have two optical ports for directionally transmitting optical power. The specific technical changes with regard to the previous edition are: - the definitions have been reconsidered; - environmental category has been deleted from classification; - the clause relating to quality assessment procedures has been deleted; and - annexes A and B have been added.
Lichtwellenleiter - Verbindungselemente und passive Bauteile - Lichtwellenleiter-Isolatoren - Teil 1: Fachgrundspezifikation
Dispositifs d'interconnexion et composants passifs à fibres optiques - Isolateurs à fibres optiques - Partie 1: Spécification générique
La CEI 61202-1:2009 s'applique aux isolateurs utilisés dans le domaine des fibres optiques, possédant tous les caractéristiques ce sont des dispositifs optiques non réciproques, ce sont des dispositifs passifs et ont deux ports optiques pour les puissances optiques à émission directionnelle. Les changements techniques particuliers par rapport à l'édition précédente sont les suivants: - les définitions ont été revues; - la catégorie d'environnement a été retirée de la classification; - l'article relatif aux procédures d'évaluation de la qualité a été retirée; et - les Annexes A et B ont été ajoutées.
Optični spojni elementi in pasivne komponente - Optični izolatorji - 1. del: Rodovna specifikacija (IEC 61202-1:2009)
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
01-november-2009
1DGRPHãþD
SIST EN 61202-1:2004
2SWLþQLVSRMQLHOHPHQWLLQSDVLYQHNRPSRQHQWH2SWLþQLL]RODWRUMLGHO
5RGRYQDVSHFLILNDFLMD ,(&
Fibre optic interconnecting devices and passive components - Fibre optic isolators - Part
1: Generic specification (IEC 61202-1:2009)
Lichtwellenleiter - Verbindungselemente und passive Bauteile - Lichtwellenleiter-
Isolatoren - Teil 1: Fachgrundspezifikation (IEC 61202-1:2009)
Dispositifs d'interconnexion et composants passifs à fibres optiques - Isolateurs à fibres
optiques - Partie 1: Spécification générique (CEI 61202-1:2009)
Ta slovenski standard je istoveten z: EN 61202-1:2009
ICS:
33.180.20 3RYH]RYDOQHQDSUDYH]D Fibre optic interconnecting
RSWLþQDYODNQD devices
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
EUROPEAN STANDARD
EN 61202-1
NORME EUROPÉENNE
September 2009
EUROPÄISCHE NORM
ICS 33.180.20 Supersedes EN 61202-1:2000
English version
Fibre optic interconnecting devices
and passive components -
Fibre optic isolators -
Part 1: Generic specification
(IEC 61202-1:2009)
Dispositifs d'interconnexion Lichtwellenleiter -
et composants passifs à fibres optiques - Verbindungselemente
Isolateurs à fibres optiques - und passive Bauteile -
Partie 1: Spécification générique Lichtwellenleiter-Isolatoren -
(CEI 61202-1:2009) Teil 1: Fachgrundspezifikation
(IEC 61202-1:2009)
This European Standard was approved by CENELEC on 2009-08-01. CENELEC members are bound to comply
with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard
the status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on
application to the Central Secretariat or to any CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CENELEC member into its own language and notified
to the Central Secretariat has the same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Cyprus, the
Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain,
Sweden, Switzerland and the United Kingdom.
CENELEC
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
Central Secretariat: Avenue Marnix 17, B - 1000 Brussels
© 2009 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members.
Ref. No. EN 61202-1:2009 E
Foreword
The text of document 86B/2845/FDIS, future edition 3 of IEC 61202-1, prepared by SC 86B, Fibre optic
interconnecting devices and passive components, of IEC TC 86, Fibre optics, was submitted to the
IEC-CENELEC parallel vote and was approved by CENELEC as EN 61202-1 on 2009-08-01.
This European Standard supersedes EN 61202-1:2000.
The specific technical changes with regard to EN 61202-1:2000 are as follows.
– the definitions have been reconsidered;
– environmental category has been deleted from classification;
– the clause relating to quality assessment procedures has been deleted;
– Annexes A and B have been added.
The following dates were fixed:
– latest date by which the EN has to be implemented
at national level by publication of an identical
national standard or by endorsement (dop) 2010-05-01
– latest date by which the national standards conflicting
with the EN have to be withdrawn (dow) 2010-08-01
Annex ZA has been added by CENELEC.
__________
Endorsement notice
The text of the International Standard IEC 61202-1:2009 was approved by CENELEC as a European
Standard without any modification.
__________
- 3 - EN 61202-1:2009
Annex ZA
(normative)
Normative references to international publications
with their corresponding European publications
The following referenced documents are indispensable for the application of this document. For dated
references, only the edition cited applies. For undated references, the latest edition of the referenced
document (including any amendments) applies.
NOTE When an international publication has been modified by common modifications, indicated by (mod), the relevant EN/HD
applies.
Publication Year Title EN/HD Year
IEC 60027 Series Letter symbols to be used in electrical EN 60027 Series
technology
IEC 60050-731 1991 International Electrotechnical Vocabulary – –
(IEV) -
Chapter 731: Optical fibre communication
IEC 60617 Data- Graphical symbols for diagrams – –
base
IEC 60695-11-5 2004 Fire hazard testing - EN 60695-11-5 2005
Part 11-5: Test flames - Needle-flame test
method - Apparatus, confirmatory test
arrangement and guidance
IEC 60825-1 2007 Safety of laser products - EN 60825-1 2007
Part 1: Equipment classification and
requirements
1) 2)
IEC 60869-1 – Fibre optic attenuators - EN 60869-1 2000
Part 1: Generic specification
IEC 60874 Series Connectors for optical fibres and cables EN 60874 Series
1) 2)
IEC 61073-1 – Fibre optic interconnecting devices and passive EN 61073-1 2009
components - Mechanical splices and fusion
splice protectors for optical fibres and cables -
Part 1: Generic specification
IEC 61300 Series Fibre optic interconnecting devices and passive EN 61300 Series
components - Basic test and measurement
procedures
1) 2)
IEC 61754-2 – Fibre optic connector interfaces - EN 61754-2 1997
Part 2: Type BFOC/2,5 connector family
1) 2)
IEC 61754-4 – Fibre optic connector interfaces - EN 61754-4 1997
Part 4: Type SC connector family
1) 2)
IEC 61754-13 – Fibre optic connector interfaces - EN 61754-13 2006
Part 13: Type FC-PC connector
1)
IEC QC 01 – IEC Quality Assessment System for Electronic – –
Components (IECQ System) - Basic Rules
1)
IEC QC 001002-3 – IEC Quality Assessment System for Electronic – –
Components (IECQ) - Rules of Procedure -
Part 3: Approval procedures
1)
IEC Guide 102 – Electronic components – Specification – –
structures for quality assessment (Qualification
approval and capability approval)
)
Undated reference.
)
Valid edition at date of issue.
Publication Year Title EN/HD Year
ISO 129-1 2004 Technical drawings - Indication of dimensions – –
and tolerances -
Part 1: General principles
ISO 286-1 1988 ISO system of limits and fits - EN 20286-1 1993
Part 1: Bases of tolerances, deviations and fits
1)
ISO 1101 – Geometrical Product Specifications (GPS) - – –
Geometrical tolerancing - Tolerances of form,
orientation, location and run-out
ISO 8601 2004 Data elements and interchange formats - – –
Information interchange - Representation of
dates and times
IEC 61202-1 ®
Edition 3.0 2009-06
INTERNATIONAL
STANDARD
NORME
INTERNATIONALE
Fibre optic interconnecting devices and passive components – Fibre optic
isolators –
Part 1: Generic specification
Dispositfs d’interconnexion et composants passifs à fibres optiques – Isolateurs
à fibres optiques –
Partie 1: Spécification générique
INTERNATIONAL
ELECTROTECHNICAL
COMMISSION
COMMISSION
ELECTROTECHNIQUE
PRICE CODE
INTERNATIONALE
U
CODE PRIX
ICS 33.180.20 ISBN 2-8318-1049-4
– 2 – 61202-1 © IEC:2009
CONTENTS
FOREWORD.4
1 Scope.6
2 Normative references .6
3 Terms and definitions .7
3.1 Basic term definitions .7
3.2 Component definitions.8
3.3 Performance parameter definitions .9
4 Requirements .10
4.1 Classification.10
4.1.1 General .10
4.1.2 Type.10
4.1.3 Style.11
4.1.4 Variant .12
4.1.5 Assessment level.12
4.1.6 Normative reference extensions .12
4.2 Documentation .13
4.2.1 Symbols .13
4.2.2 Specification system.13
4.2.3 Drawings .15
4.2.4 Tests and measurements.15
4.2.5 Test data sheets.15
4.2.6 Instructions for use.16
4.3 Standardization system .16
4.3.1 Interface standards.16
4.3.2 Performance standards.16
4.3.3 Reliability standards .17
4.3.4 Interlinking .17
4.4 Design and construction .18
4.4.1 Materials .18
4.4.2 Workmanship.19
4.5 Quality .19
4.6 Performance.19
4.7 Identification and marking .19
4.7.1 General .19
4.7.2 Variant identification number .19
4.7.3 Component marking .19
4.7.4 Package marking.20
4.8 Packaging .20
4.9 Storage conditions .20
4.10 Safety .20
Annex A (informative) Example of technology of bulk isolator based on magneto-optic
effect .21
Annex B (informative) Example of technology of optical waveguide isolator .23
Bibliography.26
Figure 1 – Standard system .18
61202-1 © IEC:2009 – 3 –
Figure A.1 – Polarization-dependent optical.22
Figure A.2 – Polarization-independent optical isolator.23
Figure B.1 – Mode conversion type of the optical waveguide isolator .24
Figure B.2 – Phase shifter type of the optical waveguide isolator .25
Table 1 – Three-level IEC specification structure .13
Table 2 – Standards interlink matrix.18
– 4 – 61202-1 © IEC:2009
INTERNATIONAL ELECTROTECHNICAL COMMISSION
____________
FIBRE OPTIC INTERCONNECTING
DEVICE
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.