EN 60512-1-100:2006

Connectors for electronic equipment - Tests and measurements - Part 1-100: General - Applicable publications

Provides the test numbers and the applicable parts of the IEC 60512 series.

Steckverbinder für elektronische Einrichtungen - Mess- und Prüfverfahren - Teil 1-100: Allgemeines - Zutreffende Publikationen

Connecteurs pour équipements électroniques - Essais et mesures - Partie 1-100: Généralités - Publications applicables

Fournit la liste des numéros d'essai et des parties concernées de la série CEI 60512.

Konektorji za elektronsko opremo – Preskusi in meritve – 1-100. del: Splošno – Uporabne publikacije (IEC 60512-1-100:2006)

General Information

• Status: Withdrawn
• Publication Date: 16-May-2006
• Withdrawal Date: 31-Mar-2009
• ICS: 31.220.10 - Plug-and-socket devices. Connectors
• Technical Committee: CLC/SR 48B - Connectors
• Drafting Committee: IEC/SC 48B - IEC_SC_48B
• Parallel Committee: IEC/SC 48B - IEC_SC_48B
• Current Stage: 9960 - Withdrawal effective - Withdrawal
• Start Date: 28-Mar-2015
• Completion Date: 28-Mar-2015
• Ref Project: SIST EN 60512-1-100:2006 - Connectors for electronic equipment - Tests and measurements -- Part 1-100: General - Applicable publications

Relations

• Replaces: EN 60512-1-100:2001 - Connectors for electronic equipment - Tests and measurements - Part 1-100: General - Applicable publications
• Effective Date: 29-Jan-2023
• Replaced By: EN 60512-1-100:2012 - Connectors for electronic equipment - Tests and measurements - Part 1-100: General - Applicable publications
• Effective Date: 29-Jan-2023

Standards Content (Sample)

SLOVENSKI SIST EN 60512-1-100:2006

STANDARD
oct 2006
Konektorji za elektronsko opremo – Preskusi in meritve – 1-100. del: Splošno
– Uporabne publikacije (IEC 60512-1-100:2006)
Connectors for electronic equipment – Tests and measurements – Part 1-100:
General – Applicable publications (IEC 60512-1-100:2006)
ICS 31.220.10 Referenčna številka
©  Standard je založil in izdal Slovenski inštitut za standardizacijo. Razmnoževanje ali kopiranje celote ali delov tega dokumenta ni dovoljeno

EUROPEAN STANDARD
EN 60512-1-100
NORME EUROPÉENNE
May 2006
EUROPÄISCHE NORM
ICS 31.220.10 Supersedes EN 60512-1-100:2001

English version
Connectors for electronic equipment -
Tests and measurements
Part 1-100: General -
Applicable publications
(IEC 60512-1-100:2006)
Connecteurs pour équipements Steckverbinder für elektronische
électroniques - Einrichtungen -
Essais et mesures Mess- und Prüfverfahren
Partie 1-100: Généralités - Teil 1-100: Allgemeines -
Publications applicables Zutreffende Publikationen
(CEI 60512-1-100:2006) (IEC 60512-1-100:2006)

This European Standard was approved by CENELEC on 2006-04-01. CENELEC members are bound to comply
with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard
the status of a national standard without any alteration.

Up-to-date lists and bibliographical references concerning such national standards may be obtained on
application to the Central Secretariat or to any CENELEC member.

This European Standard exists in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CENELEC member into its own language and notified
to the Central Secretariat has the same status as the official versions.

CENELEC members are the national electrotechnical committees of Austria, Belgium, Cyprus, the Czech
Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain,
Sweden, Switzerland and the United Kingdom.

CENELEC
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung

Central Secretariat: rue de Stassart 35, B - 1050 Brussels

© 2006 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members.
Ref. No. EN 60512-1-100:2006 E

Foreword
The text of document 48B/1603/FDIS, future edition 2 of IEC 60512-1-100, prepared by SC 48B,
Connectors, of IEC TC 48, Electromechanical components and mechanical structures for electronic
equipment, was submitted to the IEC-CENELEC parallel vote and was approved by CENELEC as
EN 60512-1-100 on 2006-04-01.
This European Standard supersedes EN 60512-1-100:2001.
This European Standard reflects the status of publications in the EN 60512 series as of 2006-03.
The following dates were fixed:
– latest date by which the EN has to be implemented
at national level by publication of an identical
national standard or by endorsement (dop) 2007-01-01
– latest date by which the national standards conflicting
with the EN have to be withdrawn (dow) 2009-04-01
__________
Endorsement notice
The text of the International Standard IEC 60512-1-100:2006 was approved by CENELEC as a European
Standard without any modification.
__________
NORME CEI
INTERNATIONALE
IEC
60512-1-100
INTERNATIONAL
Deuxième édition
STANDARD
Second edition
2006-03
Connecteurs pour équipements électroniques –
Essais et mesures –
Partie 1-100:
Généralités –
Publications applicables
Connectors for electronic equipment –
Tests and measurements –
Part 1-100:
General –
Applicable publications
 IEC 2006 Droits de reproduction réservés  Copyright - all rights reserved
Aucune partie de cette publication ne peut être reproduite ni No part of this publication may be reproduced or utilized in any
utilisée sous quelque forme que ce soit et par aucun procédé, form or by any means, electronic or mechanical, including
électronique ou mécanique, y compris la photocopie et les photocopying and microfilm, without permission in writing from
microfilms, sans l'accord écrit de l'éditeur. the publisher.
International Electrotechnical Commission, 3, rue de Varembé, PO Box 131, CH-1211 Geneva 20, Switzerland
Telephone: [phone] Telefax: [phone] E-mail: [e-mail] Web: www.iec.ch
CODE PRIX
J
PRICE CODE
Commission Electrotechnique Internationale
International Electrotechnical Commission
МеждународнаяЭлектротехническаяКомиссия
Pour prix, voir catalogue en vigueur
For price, see current catalogue

60512-1-100  IEC:2006 – 3 –
INTERNATIONAL ELECTROTECHNICAL COMMISSION
____________
CONNECTORS FOR ELECTRONIC EQUIPMENT –
TESTS AND MEASUREMENTS –
Part 1-100: General – Applicable publications

FOREWORD
1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising
all national electrotechnical committees (IEC National Committees). The object of IEC is to promote
international co-operation on all questions concerning standardization in the electrical and electronic fields. To
this end and in addition to other activities, IEC publishes International Standards, Technical Specifications,
Technical Reports, Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC
Publication(s)”). Their preparation is entrusted to technical committees; any IEC National Committee interested
in the subject dealt with may participate in this preparatory work. International, governmental and non-
governmental organizations liaising with the IEC also participate in this preparation. IEC collaborates closely
with the International Organization for Standardization (ISO) in accordance with conditions determined by
agreement between the two organizations.
2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international
consensus of opinion on the relevant subjects since each technical committee has representation from all
interested IEC National Committees.
3) IEC Publications have the form of recommendations for international use and are accepted by IEC National
Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC
Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any
misinterpretation by any end user.
4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications
transparently to the maximum extent possible in their national and regional publications. Any divergence
between any IEC Publication and the corresponding national or regional publication shall be clearly indicated in
the latter.
5) IEC provides no marking procedure to indicate its approval and cannot be rendered responsible for any
equipment declared to be in conformity with an IEC Publication.
6) All users should ensure that they have the latest edition of this publication.
7) No liability shall attach to IEC or its directors, employees, servants or agents including individual experts and
members of its technical committees and IEC National Committees for any personal injury, property damage or
other damage of any nature whatsoever, whether direct or indirect, or for costs (including legal fees) and
expenses arising out of the publication, use of, or reliance upon, this IEC Publication or any other IEC
Publications.
8) Attention is drawn to the Normative references cited in this publication. Use of the referenced publications is
indispensable for the correct application of this publication.
9) Attention is drawn to the possibility that some of the elements of this IEC Publication may be the subject of
patent rights. IEC shall not be held responsible for identifying any or all such patent rights.
International Standard IEC 60512-1-100 has been prepared by subcommittee 48B: Connectors,
of IEC technical committee 48: Electromechanical components and mechanical structures for
electronic equipment.
This second edition cancels and replaces the first edition published in 2001. This edition
constitutes a technical revision.
This new edition reflects the status of publications in the IEC 60512 series as of 2006-03.

60512-1-100  IEC:2006 – 5 –
The text of this standard is based on the following documents:
FDIS Report on voting
48B/1603/FDIS 48B/1656/RVD
Full information on the voting for the approval of this standard can be found in the report on
voting indicated in the above table.
This publicat
...