EN 60512-1-100:2012
(Main)Connectors for electronic equipment - Tests and measurements - Part 1-100: General - Applicable publications
Connectors for electronic equipment - Tests and measurements - Part 1-100: General - Applicable publications
IEC 60512-1-100:2012 provides a listing of the 60512 series of standards for specific tests that are created for connectors. Further it gives cross-references with the former (60)512 standards, where different test numbers were used. The connector tests as such are mainly identical with the previously published standards; minor changes may be introduced due to technical developments (e.g. other soldering temperatures in soldering tests, resulting from the introduction of lead-free soldering). The former issues were in booklets, with several related tests in one document, while the present issues are leaflets, each featuring one single test. This third edition cancels and replaces the second edition published in 2006. This edition constitutes a technical revision. This new edition reflects the status of publications in the IEC 60512 series as of September 1st 2011.
Steckverbinder für elektronische Einrichtungen - Mess- und Prüfverfahren - Teil 1-100: Allgemeines - Zutreffende Publikationen
Connecteurs pour équipements électroniques - Essais et mesures - Partie 1-100: Généralités - Publications applicables
La CEI 60512-1-100:2012 donne une liste des normes de la série 60512 qui couvrent les essais qui ont été créés spécifiquement pour les connecteurs. En outre, elle indique les correspondances avec les anciennes normes de la série (60)512, lorsque des numéros d'essai différents étaient utilisés. Les essais applicables aux connecteurs, en tant que tels, sont en grande partie identiques à ceux des normes publiées antérieurement; des modifications mineures peuvent être introduites pour tenir compte des évolutions techniques (par exemple, d'autres températures de soudage pour les essais de soudage, suite à l'introduction du soudage sans plomb). Les anciennes publications avaient la forme de recueils, avec plusieurs essais liés dans un même document, tandis que les versions actuelles ont la forme de documents individuels, contenant chacun la description d'un seul essai. Cette troisième édition annule et remplace la deuxième édition parue en 2006. Cette édition constitue une révision technique. Cette nouvelle édition reflète le statut des publications de la série CEI 60512 à partir du 1er septembre 2011.
Konektorji za elektronsko opremo - Preskusi in meritve - 1-100. del: Splošno - Uporabne publikacije
V tem delu standarda IEC 60512 je seznam skupine standardov 60512 za posebne preskuse, ki se izvajajo na konektorjih. Poleg tega vključuje sklicevanja na nekdanje standarde (60)512, v katerih so se uporabljale drugačne številke preskusov. Preskusi konektorjev so večinoma enaki kot pri predhodnih standardih, nekaj manjših sprememb je nastalo zaradi tehničnega razvoja (npr. drugačne temperature mehkega spajkanja, ki so posledica uvedbe spajkanja brez svinca). Predhodni standardi so bili izdani v knjižicah z več zadevnimi preskusi v enem dokumentu, medtem ko so sedanji izdani v obliki posameznih listov, ki vključujejo po en preskus.
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
SIST EN 60512-1-100:2012
01-julij-2012
Konektorji za elektronsko opremo - Preskusi in meritve - 1-100. del: Splošno -
Uporabne publikacije
Connectors for electronic equipment - Tests and measurements - Part 1-100 Ed 3.0:
General - applicable publications
Steckverbinder für elektronische Einrichtungen - Mess- und Prüfverfahren - Teil 1-100:
Allgemeines - Zutreffende Publikationen
Connecteurs pour équipements électroniques - Essais et mesures - Partie 1-100 Ed.3:
Généralités - Publications applicables
Ta slovenski standard je istoveten z: EN 60512-1-100:2012
ICS:
31.220.10 9WLþLLQYWLþQLFHNRQHNWRUML Plug-and-socket devices.
Connectors
SIST EN 60512-1-100:2012 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
SIST EN 60512-1-100:2012
---------------------- Page: 2 ----------------------
SIST EN 60512-1-100:2012
EUROPEAN STANDARD
EN 60512-1-100
NORME EUROPÉENNE
May 2012
EUROPÄISCHE NORM
ICS 31.220.10 Supersedes EN 60512-1-100:2006
English version
Connectors for electronic equipment -
Tests and measurements -
Part 1-100: General -
Applicable publications
(IEC 60512-1-100:2012)
Connecteurs pour équipements Steckverbinder für elektronische
électroniques - Einrichtungen -
Essais et mesures - Mess- und Prüfverfahren -
Partie 1-100: Généralités - Teil 1-100: Allgemeines -
Publications applicables Zutreffende Publikationen
(CEI 60512-1-100:2012) (IEC 60512-1-100:2012)
This European Standard was approved by CENELEC on 2012-03-28. CENELEC members are bound to comply
with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard
the status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on
application to the CEN-CENELEC Management Centre or to any CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CENELEC member into its own language and notified
to the CEN-CENELEC Management Centre has the same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus,
the Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy,
Latvia, Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia,
Spain, Sweden, Switzerland, Turkey and the United Kingdom.
CENELEC
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
Management Centre: Avenue Marnix 17, B - 1000 Brussels
© 2012 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members.
Ref. No. EN 60512-1-100:2012 E
---------------------- Page: 3 ----------------------
SIST EN 60512-1-100:2012
EN 60512-1-100:2012 - 2 -
Foreword
The text of document 48B/2270/FDIS, future edition 3 of IEC 60512-1-100, prepared by SC 48B,
"Connectors", of IEC TC 48, "Electromechanical components and mechanical structures for electronic
equipment" was submitted to the IEC-CENELEC parallel vote and approved by CENELEC as EN 60512-
1-100:2012.
The following dates are fixed:
(dop) 2012-12-28
• latest date by which the document has
to be implemented at national level by
publication of an identical national
standard or by endorsement
• latest date by which the national (dow) 2015-03-28
standards conflicting with the
document have to be withdrawn
This document supersedes EN 60512-1-100:2006.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CENELEC [and/or CEN] shall not be held responsible for identifying any or all such patent
rights.
Endorsement notice
The text of the International Standard IEC 60512-1-100:2012 was approved by CENELEC as a European
Standard without any modification.
---------------------- Page: 4 ----------------------
SIST EN 60512-1-100:2012
IEC 60512-1-100
®
Edition 3.0 2012-02
INTERNATIONAL
STANDARD
NORME
INTERNATIONALE
Connectors for electronic equipment – Tests and measurements –
Part 1-100: General – Applicable publications
Connecteurs pour équipements électroniques – Essais et mesures –
Partie 1-100: Généralités – Publications applicables
INTERNATIONAL
ELECTROTECHNICAL
COMMISSION
COMMISSION
ELECTROTECHNIQUE
PRICE CODE
INTERNATIONALE
K
CODE PRIX
ICS 31.220.10 ISBN 978-2-88912-891-4
Warning! Make sure
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.