Arc welding equipment - Part 11: Electrode holders

IEC 60974-11:2010 is applicable to electrode holders for manual metal arc welding with electrodes up to 10 mm in diameter. It is not applicable to electrode holders for underwater welding. This part of IEC 60974 specifies safety and performance requirements of electrode holders. This third edition cancels and replaces the second edition published in 2004. This edition constitutes a technical revision. The significant changes with respect to the previous edition are the following: - change of the environmental condition in accordance with IEC 60974-1 (see Clause 4); - change of electrical measuring instruments accuracy to Class 1 (see 5.1); - correction of sphere diameter to 12,5 mm (see 8.1); - alternative dielectric strength test (see 8.3). This publication is to be read in conjunction with IEC 60974-1:2005.

Lichtbogenschweißeinrichtungen - Teil 11: Elektrodenhalter

Matériel de soudage à l'arc - Partie 11: Porte-électrodes

La CEI 60974-11:2010 s'applique aux porte-électrode pour soudage manuel électrique à l'arc avec des électrodes jusqu'à 10 mm de diamètre. Elle ne s'applique pas aux porte-électrode pour le soudage sous l'eau. La présente partie de la CEI 60974 spécifie les exigences de sécurité et de performance pour les porte-électrode. Cette troisième édition annule et remplace la deuxième édition parue en 2004. Elle constitue une révision technique. Les modifications signifiantes concernant l'édition précédente sont les suivantes: - modification des conditions ambiantes conformément à la CEI 60974-1 (voir l'Article 4); - modification de la précision des appareils de mesure électriques à la Classe 1 (voir 5.1); - correction du diamètre de bille à 12,5 mm (voir 8.1); - autre essai de rigidité diélectrique (voir 8.3). Cette publication doit être lue conjointement avec la CEI 60974-1:2005.

Oprema za obločno varjenje - 11. del: Držala elektrod (IEC 60974-11:2010)

Ta del IEC 60974 velja za držala elektrod za ročno kovinsko opremo za obločno varjenje, z elektrodami premera do 10 mm. Ne velja za držala elektrod za podvodno varjenje. Ta del IEC 60974 določa zahteve za varnost in delovanje držal elektrod.

General Information

Status
Published
Publication Date
14-Oct-2010
Withdrawal Date
30-Sep-2013
Technical Committee
Drafting Committee
Parallel Committee
Current Stage
6060 - Document made available - Publishing
Start Date
15-Oct-2010
Completion Date
15-Oct-2010

Relations

Buy Standard

Standard
EN 60974-11:2010
English language
16 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN 60974-11:2010
01-december-2010
1DGRPHãþD
SIST EN 60974-11:2005
2SUHPD]DREORþQRYDUMHQMHGHO'UåDODHOHNWURG ,(&
Arc welding equipment - Part 11: Electrode holders (IEC 60974-11:2010)
Lichtbogenschweißeinrichtungen - Teil 11: Elektrodenhalter (IEC 60974-11:2010)
Matériel de soudage à l'arc - Partie 11: Porte-électrodes (CEI 60974-11:2010)
Ta slovenski standard je istoveten z: EN 60974-11:2010
ICS:
25.160.30 Varilna oprema Welding equipment
SIST EN 60974-11:2010 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN 60974-11:2010

---------------------- Page: 2 ----------------------

SIST EN 60974-11:2010

EUROPEAN STANDARD
EN 60974-11

NORME EUROPÉENNE
October 2010
EUROPÄISCHE NORM

ICS 25.160 Supersedes EN 60974-11:2004


English version


Arc welding equipment -
Part 11: Electrode holders
(IEC 60974-11:2010)


Matériel de soudage à l'arc -  Lichtbogenschweißeinrichtungen -
Partie 11: Porte-électrodes Teil 11: Elektrodenhalter
(CEI 60974-11:2010) (IEC 60974-11:2010)




This European Standard was approved by CENELEC on 2010-10-01. CENELEC members are bound to comply
with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard
the status of a national standard without any alteration.

Up-to-date lists and bibliographical references concerning such national standards may be obtained on
application to the Central Secretariat or to any CENELEC member.

This European Standard exists in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CENELEC member into its own language and notified
to the Central Secretariat has the same status as the official versions.

CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus,
the Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy,
Latvia, Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia,
Spain, Sweden, Switzerland and the United Kingdom.

CENELEC
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung

Management Centre: Avenue Marnix 17, B - 1000 Brussels


© 2010 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members.
Ref. No. EN 60974-11:2010 E

---------------------- Page: 3 ----------------------

SIST EN 60974-11:2010
EN 60974-11:2010 - 2 -
Foreword
The text of document 26/421/FDIS, future edition 3 of IEC 60974-11, prepared by IEC TC 26, Electric
welding, was submitted to the IEC-CENELEC parallel vote and was approved by CENELEC as
EN 60974-11 on 2010-10-01.
This European Standard supersedes EN 60974-11:2004.
The significant changes with respect to EN 60974-11:2004 are the following:
– change of the environmental condition in accordance with EN 60974-1 (see Clause 4);
– change of electrical measuring instruments accuracy to Class 1 (see 5.1);
– correction of sphere diameter to 12,5 mm (see 8.1);
– alternative dielectric strength test (see 8.3).
This standard is to be used in conjunction with EN 60974-1.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN and CENELEC shall not be held responsible for identifying any or all such patent
rights.
The following dates were fixed:
– latest date by which the EN has to be implemented
at national level by publication of an identical
national standard or by endorsement (dop) 2011-07-01
– latest date by which the national standards conflicting
with the EN have to be withdrawn (dow) 2013-10-01
Annex ZA has been added by CENELEC.
__________
Endorsement notice
The text of the International Standard IEC 60974-11:2010 was approved by CENELEC as a European
Standard without any modification.
__________

---------------------- Page: 4 ----------------------

SIST EN 60974-11:2010
- 3 - EN 60974-11:2010
Annex ZA
(normative)

Normative references to international publications
with their corresponding European publications

The following referenced documents are indispensable for the application of this document. For dated
references, only the edition cited applies. For undated references, the latest edition of the referenced
document (including any amendments) applies.

NOTE  When an international publication has been modified by common modifications, indicated by (mod), the relevant EN/HD
applies.

Publication Year Title EN/HD Year

IEC 60050-151 - International Electrotechnical Vocabulary - -
(IEV) -
Part 151: Electrical and magne
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.