EN 62317-6:2016

Ferrite cores - Dimensions - Part 6: ETD-cores for use in power supplies

IEC 62317-6:2015 specifies the dimensions that are of importance for mechanical interchangeability for ETD-cores made of ferrite, the essential dimensions of coil formers to be used with them, and the effective parameter values to be used in calculations involving them. This first edition cancels and replaces the second edition of IEC 61185 published in 2005. This edition constitutes a technical revision. This edition includes the following significant technical changes with respect to the previous edition: - Changed dimension A of ETD 54 core.

Ferritkerne - Maße - Teil 6: ETD-Kerne für den Einsatz in Stromversorgungsanwendungen

Noyaux ferrites - Dimensions - Partie 6: Noyaux ETD destinés à être utilisés dans des alimentations

L'IEC 62317-6:2015 spécifie les dimensions qui revêtent une importance particulière pour l'interchangeabilité mécanique pour les noyaux ETD en ferrite, les dimensions essentielles des carcasses à utiliser avec ces noyaux et les valeurs des paramètres effectifs à utiliser pour les calculs qui s'y rapportent. Cette première édition annule et remplace la deuxième édition de l'IEC 61185 parue en 2005 dont elle constitue une révision technique. Cette édition inclut les modifications techniques majeures suivantes par rapport à l'édition précédente: - Modification de la dimension A du noyau ETD 54.

Feritna jedra - Mere - 6. del: ETD-jedra za uporabo v napajalnikih

Ta del standarda IEC 62317 določa mere, ki so pomembne za mehansko medsebojno zamenljivost feritnih ETD-jeder, bistvene mere tuljave, ki se uporablja s temi jedri, in vrednosti efektivnih parametrov, ki se uporabljajo pri izračunih, povezanih z jedri.
Uporaba »izpeljanih« standardov, ki podajajo podrobnejše specifikacije o delih komponent in hkrati dovoljujejo skladnost s tem standardom, je obravnavana v dodatku A, ki vključuje tudi primer izpeljanega standarda za tuljave.

General Information

• Status: Withdrawn
• Publication Date: 17-Mar-2016
• Withdrawal Date: 07-Jan-2019
• ICS: 29.100.10 - Magnetic components
• Technical Committee: CLC/SR 51 - Magnetic components and ferrite materials
• Drafting Committee: IEC/TC 51 - IEC_TC_51
• Current Stage: 9960 - Withdrawal effective - Withdrawal
• Start Date: 30-Aug-2021
• Completion Date: 30-Aug-2021
• Ref Project: SIST EN 62317-6:2016 - Ferrite cores - Dimensions - Part 6: ETD-cores for use in power supplies

Relations

• Replaces: EN 61185:2005 - Ferrite cores (ETD-cores) intended for use in power supply applications - Dimensions
• Effective Date: 22-Mar-2016
• Replaced By: EN IEC 63093-6:2018 - Ferrite cores - Guidelines on dimensions and the limits of surface irregularities - Part 6: ETD-cores for use in power supplies
• Effective Date: 16-Oct-2018

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN 62317-6:2016
01-junij-2016
1DGRPHãþD
SIST EN 61185:2005
Feritna jedra - Mere - 6. del: ETD-jedra za uporabo v napajalnikih
Ferrite cores - Dimensions - Part 6: ETD-cores for use in power supplies
Noyaux ferrites - Dimensions - Partie 6: Noyaux ETD destinés à être utilisés dans des
alimentations
Ta slovenski standard je istoveten z: EN 62317-6:2016
ICS:
29.100.10 Magnetne komponente Magnetic components
SIST EN 62317-6:2016 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN 62317-6:2016

---------------------- Page: 2 ----------------------

SIST EN 62317-6:2016


EUROPEAN STANDARD EN 62317-6

NORME EUROPÉENNE

EUROPÄISCHE NORM
March 2016
ICS 29.100.10 Supersedes EN 61185:2005
English Version
Ferrite cores - Dimensions - Part 6: ETD-cores for use in power
supplies
(IEC 62317-6:2015)
Noyaux ferrites - Dimensions - Partie 6: Noyaux ETD Ferritkerne - Maße - Teil 6: ETD-Kerne für den Einsatz in
destinés à être utilisés dans des alimentations Stromversorgungsanwendungen
(IEC 62317-6:2015) (IEC 62317-6:2015)
This European Standard was approved by CENELEC on 2016-01-08. CENELEC members are bound to comply with the CEN/CENELEC
Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC
Management Centre or to any CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the
same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic,
Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and the United Kingdom.


European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2016 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members.
 Ref. No. EN 62317-6:2016 E

---------------------- Page: 3 ----------------------

SIST EN 62317-6:2016
EN 62317-6:2016
European foreword
The text of document 51/1105/FDIS, future edition 1 of IEC 62317-6, prepared by
IEC/TC 51 "Magnetic components and ferrite materials" was submitted to the IEC-CENELEC parallel
vote and approved by CENELEC as EN 62317-6:2016.

The following dates are fixed:
(dop) 2016-10-08
• latest date by which the document has to be
implemented at national level by
publication of an identical national
standard or by endorsement
• latest date by which the national (dow) 2019-01-08
standards conflicting with the
document have to be withdrawn

This document supersedes EN 61185:2005.

Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CENELEC [and/or CEN] shall not be held responsible for identifying any or all such
patent rights.

Endorsement notice
The text of the International Standard IEC 62317-6:2015 was approved by CENELEC as a European
Standard without any modification.
In the official version, for Bibliography, the following notes have to be added for the standards indicated:

IEC 60205:2006 NOTE Harmonized as EN 60205:2006 (not modified).
IEC 60205:2006/A1:2009 NOTE Harmonized as EN 60205:2006/A1:2009 (not modified).

2

---------------------- Page: 4 ----------------------

SIST EN 62317-6:2016



IEC 62317-6

®


Edition 1.0 2015-12




INTERNATIONAL



STANDARD




NORME



INTERNATIONALE











Ferrite cores – Dimensions –

Part 6: ETD-cores for use in power supplies




Noyaux ferrites – Dimensions –

Partie 6: Noyaux ETD destinés à être utilisés dans des alimentations
















INTERNATIONAL

ELECTROTECHNICAL

COMMISSION


COMMISSION

ELECTROTECHNIQUE


INTERNATIONALE




ICS 29.100.10 ISBN 978-2-8322-3030-5



Warning! Make sure that you obtained this publication from an authorized distributor.

Attention! Veuillez vous assurer que vous avez obtenu cette publication via un distributeur agréé.

® Registered trademark of the International Electrotechnical Commission
Marque déposée de la Com
...