EN 60086-5:2011
(Main)Primary batteries - Part 5: Safety of batteries with aqueous electrolyte
Primary batteries - Part 5: Safety of batteries with aqueous electrolyte
IEC 60086-5:2011 specifies tests and requirements for primary batteries with aqueous electrolyte to ensure their safe operation under intended use and reasonably foreseeable misuse. The major technical changes with respect to the previous edition are the test requirements and the harmonization of the marking clause with the other standards of the IEC 60086 series. Moreover, the table of safety pictograms was added as Annex C.
Primärbatterien - Teil 5: Sicherheit von Batterien mit wässrigem Elektrolyt
Piles électriques - Partie 5: Sécurité des piles à électrolyte aqueux
La CEI 60086-5:2011 spécifie des essais et des exigences pour les piles électriques à électrolyte aqueux pour assurer leur fonctionnement sûr dans des conditions d'utilisation prévue et d'utilisation impropre prévisible. Les principales modifications techniques par rapport à l'édition précédente sont les exigences relatives aux essais et l'harmonisation de l'article sur le marquage avec les autres normes de la série CEI 60086. En outre, le tableau du programme de sécurité a été ajouté comme Annexe C.
Primarne baterije - 5. del: Varnost baterij z vodnim elektrolitom (IEC 60086-5:2011)
Ta del IEC 60086 določa preskuse in zahteve za primarne baterije z vodnim elektrolitom, ki zagotavljajo njihovo varno delovanje pri namenjeni uporabi in pri razumno predvidljivi napačni uporabi.
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
01-junij-2011
1DGRPHãþD
SIST EN 60086-5:2005
Primarne baterije - 5. del: Varnost baterij z vodnim elektrolitom (IEC 60086-5:2011)
Primary batteries - Part 5: Safety of batteries with aqueous electrolyte (IEC 60086-
5:2011)
Primärbatterien - Teil 5: Sicherheit von Batterien mit wässrigem Elektrolyt (IEC 60086-
5:2011)
Piles électriques - Partie 5: Sécurité des piles à électrolyte aqueux (CEI 60086-5:2011)
Ta slovenski standard je istoveten z: EN 60086-5:2011
ICS:
29.220.10 3ULPDUQLþOHQLLQEDWHULMH Primary cells and batteries
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
EUROPEAN STANDARD
EN 60086-5
NORME EUROPÉENNE
April 2011
EUROPÄISCHE NORM
ICS 29.220.10 Supersedes EN 60086-5:2005
English version
Primary batteries -
Part 5: Safety of batteries with aqueous electrolyte
(IEC 60086-5:2011)
Piles électriques - Primärbatterien -
Partie 5: Sécurité des piles à électrolyte Teil 5: Sicherheit von Batterien mit
aqueux wässrigem Elektrolyt
(CEI 60086-5:2011) (IEC 60086-5:2011)
This European Standard was approved by CENELEC on 2011-04-12. CENELEC members are bound to comply
with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard
the status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on
application to the Central Secretariat or to any CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CENELEC member into its own language and notified
to the Central Secretariat has the same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus,
the Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy,
Latvia, Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia,
Spain, Sweden, Switzerland and the United Kingdom.
CENELEC
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
Management Centre: Avenue Marnix 17, B - 1000 Brussels
© 2011 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members.
Ref. No. EN 60086-5:2011 E
Foreword
The text of document 35/1273/CDV, future edition 3 of IEC 60086-5, prepared by IEC TC 35, Primary
cells and batteries, was submitted to the IEC-CENELEC parallel vote and was approved by CENELEC as
EN 60086-5 on 2011-04-12.
This European Standard supersedes EN 60086-5:2005.
The major technical changes with respect to EN 60086-5:2005 are the test requirements and the
harmonization of the marking clause with the other standards of the EN 60086 series. Moreover, the table
of safety pictograms was added as Annex C.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN and CENELEC shall not be held responsible for identifying any or all such patent
rights.
The following dates were fixed:
– latest date by which the EN has to be implemented
at national level by publication of an identical
(dop) 2012-01-12
national standard or by endorsement
– latest date by which the national standards conflicting
(dow) 2014-04-12
with the EN have to be withdrawn
Annex ZA has been added by CENELEC.
__________
Endorsement notice
The text of the International Standard IEC 60086-5:2011 was approved by CENELEC as a European
Standard without any modification.
In the official version, for Bibliography, the following notes have to be added for the standards indicated:
IEC 60086-3 NOTE Harmonized as EN 60086-3.
IEC 60086-4 NOTE Harmonized as EN 60086-4.
__________
- 3 - EN 60086-5:2011
Annex ZA
(normative)
Normative references to international publications
with their corresponding European publications
The following referenced documents are indispensable for the application of this document. For dated
references, only the edition cited applies. For undated references, the latest edition of the referenced
document (including any amendments) applies.
NOTE When an international publication has been modified by common modifications, indicated by (mod), the relevant EN/HD
applies.
Publication Year Title EN/HD Year
IEC 60068-2-6 - Environmental testing - EN 60068-2-6 -
Part 2-6: Tests - Test Fc: Vibration
(sinusoidal)
IEC 60068-2-27 - Environmental testing - EN 60068-2-27 -
Part 2-27: Tests - Test Ea and guidance:
Shock
IEC 60068-2-31 - Environmental testing - EN 60068-2-31 -
Part 2-31: Tests - Test Ec: Rough handling
shocks, primarily for equipment-type
specimens
IEC 60086-1 2011 Primary batteries - EN 60086-1 2011
Part 1: General
IEC 60086-2 2011 Primary batteries - EN 60086-2 2011
Part 2: Physical and electrical specifications
IEC 60086-5 ®
Edition 3.0 2011-03
INTERNATIONAL
STANDARD
NORME
INTERNATIONALE
Primary batteries –
Part 5: Safety of batteries with aqueous electrolyte
Piles électriques –
Partie 5: Sécurité des piles à électrolyte aqueux
INTERNATIONAL
ELECTROTECHNICAL
COMMISSION
COMMISSION
ELECTROTECHNIQUE
PRICE CODE
INTERNATIONALE
CODE PRIX W
ICS 29.220.10 ISBN 978-2-88912-386-5
– 2 – 60086-5 IEC:2011
CONTENTS
FOREWORD . 4
INTRODUCTION . 6
1 Scope . 7
2 Normative references . 7
3 Terms and definitions . 7
4 Requirements for safety . 9
4.1 Design . 9
4.1.1 General . 9
4.1.2 Venting . 9
4.1.3 Insulation resistance . 10
4.2 Quality plan . 10
5 Sampling . 10
5.1 General . 10
5.2 Sampling for type approval . 10
6 Testing and requirements . 11
6.1 General . 11
6.1.1 Safety notice . 12
6.1.2 Ambient temperature . 12
6.2 Intended use . 12
6.2.1 Intended use tests and requirements . 12
6.2.2 Intended use test procedures . 12
6.3 Reasonably foreseeable misuse . 15
6.3.1 Reasonably foreseeable misuse tests and requirements . 15
6.3.2 Reasonably foreseeable misuse test procedures . 15
7 Information for safety. 17
7.1 Safety precautions during handling of batteries . 17
7.2 Packaging . 19
7.3 Handling of battery cartons . 19
7.4 Display and storage . 19
7.5 Transportation . 20
7.6 Disposal . 20
8 Instructions for use . 20
9 Marking . 21
9.1 General . 21
9.2 Marking of small batteries . 21
Annex A (informative) Additional information to 7.4 . 22
Annex B (informative) Battery compartment design guidelines . 23
Annex C (informative) Safety pictograms . 34
Bibliography . 36
Figure 1 – Sampling for type approval tests and number of batteries required . 10
Figure 2 – Temperature cycling procedure . 15
Figure 3 – Circuit diagram for incorrect installation (four batteries in series) . 16
Figure 4 – Circuit diagram for external short circuit . 16
60086-5 IEC:2011 – 3 –
Figure 5 – Circuit diagram for overdischarge . 17
Figure 6 – XYZ axes for free fall . 17
Figure 7 – Ingestion gauge (Inner dimensions) . 19
Figure B.1 – Example of series connection with one battery reversed . 23
Figure B.2 – Positive contact recessed between ribs . 25
Figure B.3 – Positive contact recessed within surrounding insulation . 25
Figure B.4 – Negative contact U-shaped to ensure no positive (+) battery contact . 26
Figure B.5 – Design with respect to battery orientation . 27
Figure B.6 – Example of the design of a positive contact of an appliance . 28
Figure B.7 – Example of a short circuit, a switch is piercing the battery insulating jacket . 29
Figure B.8 – Typical example of insulation to prevent short circuit . 29
Figure B.9 – Insertion against spring (to be avoided) . 29
Figure B.10 – Examples showing distorted springs . 30
Figure B.11 – One example of protected insertion . 30
Figure B.12 – Example of negative contacts . 31
Figure B.13 – Example of series connection of batteries with voltage tapping . 33
Table 1 – Test matrix . 11
Table 2 – Intended use tests and requirements . 12
Table 3 – Shock pulse . 13
Table 4 – Test sequence . 13
Table 5 – Test sequence . 14
Table 6 – Reasonably foreseeable misuse tests and requirements . 15
Table 7 – Marking requirements . 21
Table B.1 – Dimensions of battery terminals and recommended dimensions of the
positive contact of an appliance in Figure B.6 . 27
Table B.2 – Minimum wire diameters . 30
Table B.3 – Dimensions of the negative battery terminal . 31
Table C.1 –
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.