EN 60851-5:2008

Winding wires - Test methods - Part 5: Electrical properties

IEC 60851-5:2008 specifies the following tests: - Test 5: Electrical resistance; - Test 13: Breakdown voltage; - Test 14: Continuity of insulation; - Test 19: Dielectric dissipation factor. Significant revisions to the previous edition include the following points: - In Subclause 5.3, the addition of the use of carbon brush electrodes for the counting discontinuities during the high voltage continuity test, as an alternative to the V-groove pulley electrode; and - Clarifications in the breakdown voltage test for round wires larger than 2,500 mm and for fibrous covered wires.

Wickeldrähte - Prüfverfahren - Teil 5: Elektrische Eigenschaften

Fils de bobinage - Méthodes d'essai - Partie 5: Propriétés électriques

La CEI 60851-5:2008 donne les méthodes d'essai suivantes: - Essai 5: Résistance électrique; - Essai 13: Tension de claquage; - Essai 14: Continuité de l'enveloppe isolante; - Essai 19: Facteur de dissipation diélectrique. Les modifications significatives par rapport à l'édition précédente comprennent les points suivants: - Au Paragraphe 5.3, l'ajout de l'utilisation des électrodes balais en carbone pour le comptage des discontinuités pendant l'essai de continuité sous haute tension, comme alternative à l'électrode poulie ayant une gorge en forme de 'V'; et - Des clarifications apportées à l'essai de la tension de claquage pour les fils de section circulaire avec diamètre nominal du conducteur supérieur à 2,500 mm et pour les fils guipés de fibre.

Navijalne žice - Preskusne metode - 5. del: Električne lastnosti (IEC 60851-5:2008)

Ta del IEC 60851 določa naslednje preskuse: - Preskus 5: Električna upornost; - Preskus 13: Prebojna napetost; - Preskus 14: Neprekinjenost izolacije; - Preskus 19: Dielektrični faktor izgube; - Preskus 23: Poroznost. Za definicije, splošne opombe glede preskusnih metod in celoten niz preskusnih metod za navijalne žice glej IEC 60851-1.

General Information

• Status: Published
• Publication Date: 29-Sep-2008
• Withdrawal Date: 31-Jul-2011
• ICS: 29.060.10 - Wires
• Technical Committee: CLC/TC 55 - Winding wires
• Drafting Committee: IEC/TC 55 - IEC_TC_55
• Parallel Committee: IEC/TC 55 - IEC_TC_55
• Current Stage: 6060 - Document made available - Publishing
• Start Date: 30-Sep-2008
• Completion Date: 30-Sep-2008
• Ref Project: SIST EN 60851-5:2009 - Winding wires - Test methods -- Part 5: Electrical properties

Relations

• Replaces: EN 60851-5:1996 - Winding wires - Test methods - Part 5: Electrical properties
• Effective Date: 29-Jan-2023
• Replaces: EN 60851-5:1996/A1:1997 - Winding wires - Test methods - Part 5: Electrical properties
• Effective Date: 29-Jan-2023
• Replaces: EN 60851-5:1996/A2:2004 - Winding wires - Test methods - Part 5: Electrical properties
• Effective Date: 28-Jan-2023
• Amended By: EN 60851-5:2008/A1:2011 - Winding wires - Test methods - Part 5: Electrical properties
• Effective Date: 29-Jan-2023
• Amended By: EN 60851-5:2008/A2:2019 - Winding wires - Test methods - Part 5: Electrical properties
• Effective Date: 23-Jan-2023

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN 60851-5:2009
01-januar-2009
1DGRPHãþD
SIST EN 60851-5:2001
1DYLMDOQHåLFH3UHVNXVQHPHWRGHGHO(OHNWULþQHODVWQRVWL,(&
Winding wires - Test methods -- Part 5: Electrical properties
Wickeldrähte - Prüfverfahren - Teil 5: Elektrische Eigenschaften
Fils de bobinage - Méthodes d'essai -- Partie 5: Propriétés électriques
Ta slovenski standard je istoveten z: EN 60851-5:2008
ICS:
29.060.10 Žice Wires
SIST EN 60851-5:2009 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN 60851-5:2009

---------------------- Page: 2 ----------------------

SIST EN 60851-5:2009

EUROPEAN STANDARD
EN 60851-5

NORME EUROPÉENNE
September 2008
EUROPÄISCHE NORM

ICS 29.060.10 Supersedes EN 60851-5:1996 + A1:1997 + A2:2004


English version


Winding wires -
Test methods -
Part 5: Electrical properties
(IEC 60851-5:2008)


Fils de bobinage -  Wickeldrähte -
Méthodes d'essai - Prüfverfahren -
Partie 5: Propriétés électriques Teil 5: Elektrische Eigenschaften
(CEI 60851-5:2008) (IEC 60851-5:2008)




This European Standard was approved by CENELEC on 2008-08-01. CENELEC members are bound to comply
with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard
the status of a national standard without any alteration.

Up-to-date lists and bibliographical references concerning such national standards may be obtained on
application to the Central Secretariat or to any CENELEC member.

This European Standard exists in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CENELEC member into its own language and notified
to the Central Secretariat has the same status as the official versions.

CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Cyprus, the
Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain,
Sweden, Switzerland and the United Kingdom.

CENELEC
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung

Central Secretariat: rue de Stassart 35, B - 1050 Brussels


© 2008 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members.
Ref. No. EN 60851-5:2008 E

---------------------- Page: 3 ----------------------

SIST EN 60851-5:2009
EN 60851-5:2008 - 2 -
Foreword
The text of document 55/1069/FDIS, future edition 4 of IEC 60851-5, prepared by IEC TC 55, Winding
wires, was submitted to the IEC-CENELEC parallel vote and was approved by CENELEC as EN 60851-5
on 2008-08-01.
This European Standard supersedes EN 60851-5:1996 + A1:1997 + A2:2004.
Significant revisions to EN 60851-5:1996 include the following points:
– in Subclause 5.3, the addition of the use of carbon brush electrodes for the counting discontinuities
during the high voltage continuity test, as an alternative to the V-groove pulley electrode;
– clarifications in the breakdown voltage test for round wires larger than 2,500 mm and for fibrous
covered wires.
The following dates were fixed:
– latest date by which the EN has to be implemented
at national level by publication of an identical
national standard or by endorsement (dop) 2009-05-01
– latest date by which the national standards conflicting
with the EN have to be withdrawn (dow) 2011-08-01
Annex ZA has been added by CENELEC.
__________
Endorsement notice
The text of the International Standard IEC 60851-5:2008 was approved by CENELEC as a European
Standard without any modification.
__________

---------------------- Page: 4 ----------------------

SIST EN 60851-5:2009
- 3 - EN 60851-5:2008
Annex ZA
(normative)

Normative references to international publications
with their corresponding European publications

The following referenced documents are indispensable for the application of this document. For dated
references, only the edition cited applies. For undated references, the latest edition of the referenced
document (including any amendments) applies.

NOTE  When an international publication has been modified by common modifications, indicated by (mod), the relevant EN/HD
applies.

Publication Year Title EN/HD Year

1) 2)
IEC 60851-1 - Winding wires - Test methods - EN 60851-1 1996
Part 1: General




1)
Undated reference.
2)
Valid edition at date of issue.

---------------------- Page: 5 ----------------------

SIST EN 60851-5:2009

---------------------- Page: 6 ------
...