Ferrite cores - Dimensions - Part 14: EFD-cores for use in power supply applications

IEC 62317-14:2008 specifies the dimensions that are of importance for mechanical interchangeability for a preferred range of EFD-cores, the essential dimensions of coil formers to be used with them, and the effective parameter values to be used in calculations involving them.

Ferritkerne - Maße - Teil 14: EFD-Kerne für Stromversorgungsanwendungen

Noyaux ferrites - Dimensions - Partie 14: Noyaux EFD utilisés dans des applications d’alimentation électrique

La CEI 62317-14:2008 spécifie les dimensions qui sont importantes pour l'interchangeabilité mécanique d'une gamme préférentielle de noyaux EFD, les dimensions essentielles des corps des bobines qui doivent être utilisées avec les noyaux et les valeurs efficaces des paramètres à utiliser pour les calculs les concernant.

Feritna jedra - Dimenzije - 14. del: EFD-jedra za uporabo v napajalnikih (IEC 62317-14:2008)

General Information

Status
Withdrawn
Publication Date
08-Oct-2008
Withdrawal Date
31-Aug-2011
Current Stage
9960 - Withdrawal effective - Withdrawal
Completion Date
09-May-2022

Relations

Buy Standard

Standard
EN 62317-14:2008
English language
13 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)


SLOVENSKI STANDARD
01-december-2008
Feritna jedra - Dimenzije - 14. del: EFD-jedra za uporabo v napajalnikih (IEC 62317-
14:2008)
Ferrite cores - Dimensions - Part 14: EFD-cores for use in power supply applications
(IEC 62317-14:2008)
Ferritkerne - Maße - Teil 14: EFD-Kerne für Stromversorgungsanwendungen (IEC 62317
-14:2008)
Noyaux ferrites - Dimensions - Partie 14 : Noyaux EFD utilisés dans les applications
d’alimentation (CEI 62317-14:2008)
Ta slovenski standard je istoveten z: EN 62317-14:2008
ICS:
29.100.10 Magnetne komponente Magnetic components
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

EUROPEAN STANDARD
EN 62317-14
NORME EUROPÉENNE
October 2008
EUROPÄISCHE NORM
ICS 29.100.10
English version
Ferrite cores -
Dimensions -
Part 14: EFD-cores for use in power supply applications
(IEC 62317-14:2008)
Noyaux ferrites -  Ferritkerne -
Dimensions - Maße -
Partie 14 : Noyaux EFD utilisés Teil 14: EFD-Kerne
dans des applications für Stromversorgungsanwendungen
d’alimentation électrique (IEC 62317-14:2008)
(CEI 62317-14:2008)
This European Standard was approved by CENELEC on 2008-09-01. CENELEC members are bound to comply
with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard
the status of a national standard without any alteration.

Up-to-date lists and bibliographical references concerning such national standards may be obtained on
application to the Central Secretariat or to any CENELEC member.

This European Standard exists in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CENELEC member into its own language and notified
to the Central Secretariat has the same status as the official versions.

CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Cyprus, the
Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain,
Sweden, Switzerland and the United Kingdom.

CENELEC
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung

Central Secretariat: rue de Stassart 35, B - 1050 Brussels

© 2008 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members.
Ref. No. EN 62317-14:2008 E
Foreword
The text of document 51/934/FDIS, future edition 1 of IEC 62317-14, prepared by IEC TC 51, Magnetic
components and ferrite materials, was submitted to the IEC-CENELEC parallel vote and was approved by
CENELEC as EN 62317-14 on 2008-09-01.
The following dates were fixed:
– latest date by which the EN has to be implemented
at national level by publication of an identical
national standard or by endorsement (dop) 2009-06-01
– latest date by which the national standards conflicting
with the EN have to be withdrawn (dow) 2011-09-01
Annex ZA has been added by CENELEC.
__________
Endorsement notice
The text of the International Standard IEC 62317-14:2008 was approved by CENELEC as a European
Standard without any modification.
__________
- 3 - EN 62317-14:2008
Annex ZA
(normative)
Normative references to international publications
with their corresponding European publications

The following referenced documents are indispensable for the application of this document. For dated
references, only the edition cited applies. For undated references, the latest edition of the referenced
document (including any amendments) applies.

NOTE  When an international publication has been modified by common modifications, indicated by (mod), the relevant EN/HD
applies.
Publication Year Title EN/HD Year

1) 2)
IEC 60205 - Calculation of the effective parameters of EN 60205 2006
magnetic piece parts
1) 2)
IEC 62317-1 - Ferrite cores - Dimensions - EN 62317-1 2007
Part 1: General specification
1)
Undated reference.
2)
Valid edition at date of issue.

IEC 62317-14
Edition 1.0 2008-08
INTERNATIONAL
STANDARD
Ferrite cores – Dimensions –
Part 14: EFD-cores for use in power supply applications

INTERNATIONAL
ELECTROTECHNICAL
COMMISSION
PRICE CODE
K
ICS 29.100.10 ISBN 2-8318-9972-9
– 2 – 62317-14 © IEC:2008(E)
CONTENTS
FOREWORD.3
1 Scope.5
2 Normative references.5
3 Primary standards.5
3.1 Dimensions of EFD-cores .5
3.1.1 Principal dimensions .5
3.1.2 Effective parameter and A values .7
min
3.2 Main dimensions for coil formers.7
3.3 Pin locations and base outlines.8
3.4 Pin diameter .9
4 Mounting .9
Annex A (informative) EFD–core design .10

Figure 1 – Dimensions of EFD-cores .6
Figure 2 – Main dimensions of coil formers for EFD-cores .7
Figure 3 – Pin location (SMD type) viewed from the upper side of the board.8
Figure 4 – Pin locations (PTH type) viewed from the upper side of the board .9

Table 1 – Dimensions of EFD-cores .6
Table 2 – Effective parameter and A values for EFD-cores.7
min
Table 3 – Main dimensions of coil formers for EFD-cores .7

62317-14 © IEC:2008(E) – 3 –
INTERNATIONAL ELECTROTECHNICAL COMMISSION
______________
FERRITE CORES –
DIMENSIONS –
Part 14: EFD-cores for use in power supply applications

FOREWORD
1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising all
national electrotechnical committees (IEC National Committees). The object of the IEC is to promote international
co-operation on all questions concerning standardization in the electrical and electronic fields. To this end and in
addition to other activities, IEC publishes International Standards, Technical Specifications, Technical Reports,
Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC Publication(s)“). Their
preparation is entrusted to technical committees; any IEC National Committee interested in the subject dealt with
may participate in this preparatory work. International, governmental and non-governmental organizations liaising
with the IEC also participate in this preparation. IEC collaborates closely with the International Organization for
Standardization (ISO) in accordance with conditions determined by agreement between the two organizations.
2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international
consensus of opinion on the relevant subjects since each technical committee has representation from all
interested IEC National Committees.
3) IEC Publications have the form of recommendations for international use and are accepted by IEC National
Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC
Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any
misinterpretation by any end user.
4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications
transparently to the maximum extent possible in their national and regional publications. Any divergence between
any IEC Publication and the corresponding national or regional publication shall be clearly indicated in the latter.
5) IEC provides no marking procedure to indicate its approval and cannot be rendered responsible for any equipment
declared to be in conformit
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.