EN 61000-4-15:1998/A1:2003

Electromagnetic compatibility (EMC) - Part 4-15: Testing and measurement techniques - Flickermeter - Functional and design specifications

Superseded by EN 61000-4-15:2011

Elektromagnetische Verträglichkeit (EMV) - Teil 4-15: Prüf- und Messverfahren - Flickermeter - Funktionsbeschreibung und Auslegungsspezifikation

Compatibilité électromagnétique (CEM) - Partie 4-15: Techniques d'essai et de mesure - Flickermètre - Spécifications fonctionnelles et de conception

Elektromagnetna združljivost (EMC) - 4-15. del: Preskusne in merilne tehnike - Flikermeter - Specifikacije funkcij in zasnove - Dopolnilo A1 (IEC 61000-4-15:1997/A1:2003)

General Information

• Status: Withdrawn
• Publication Date: 03-Apr-2003
• Withdrawal Date: 28-Feb-2006
• ICS: 33.100.20 - Immunity
• Technical Committee: CLC/TC 210 - Electromagnetic Compatibility (EMC)
• Drafting Committee: IEC/SC 77A - IEC_SC_77A
• Parallel Committee: IEC/SC 77A - IEC_SC_77A
• Current Stage: 9960 - Withdrawal effective - Withdrawal
• Start Date: 02-Jan-2014
• Completion Date: 02-Jan-2014
• Directive: 2004/108/EC - Directive 2004/108/EC of the European Parliament and of the Council of 15 December 2004 on the approximation of the laws of the Member States relating to electromagnetic compatibility and repealing Directive 89/336/EEC
• Directive: 2004/108/EU - DIRECTIVE 2004/108/EC OF THE EUROPEAN PARLIAMENT AND OF THE COUNCIL of 15 December 2004 on the approximation of the laws of the Member States relating to electromagnetic compatibility and repealing Directive 89/336/EEC
• Directive: 89/336/EEC - Electromagnetic compatibility (EMC)
• Mandate: M/490 - Standardisation mandate to the European Standardisation Organisations (ESOs) to support European Smart Grid deployment
• Ref Project: SIST EN 61000-4-15:2001/A1:2003 - Electromagnetic compatibility (EMC) - Part 4-15: Testing and measurement techniques - Flickermeter - Functional and design specifications

Relations

• Replaced By: EN 61000-4-15:2011 - Electromagnetic compatibility (EMC) - Part 4-15: Testing and measurement techniques - Flickermeter - Functional and design specifications
• Effective Date: 29-Jan-2023
• Amends: EN 61000-4-15:1998 - Electromagnetic compatibility (EMC) - Part 4-15: Testing and measurement techniques - Flickermeter - Functional and design specifications
• Effective Date: 29-Jan-2023

Standards Content (Sample)

SLOVENSKI STANDARD
01-december-2003
Elektromagnetna združljivost (EMC) - 4-15. del: Preskusne in merilne tehnike -
Flikermeter - Specifikacije funkcij in zasnove - Dopolnilo A1 (IEC 61000-4-
15:1997/A1:2003)
Electromagnetic compatibility (EMC) - Part 4-15: Testing and measurement techniques -
Flickermeter - Functional and design specifications
Elektromagnetische Verträglichkeit (EMV) - Teil 4-15: Prüf- und Messverfahren -
Flickermeter - Funktionsbeschreibung und Auslegungsspezifikation
Compatibilité électromagnétique (CEM) - Partie 4-15: Techniques d'essai et de mesure -
Flickermètre - Spécifications fonctionnelles et de conception
Ta slovenski standard je istoveten z: EN 61000-4-15:1998/A1:2003
ICS:
33.100.01 Elektromagnetna združljivost Electromagnetic compatibility
na splošno in general
33.100.20 Imunost Immunity
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

EUROPEAN STANDARD EN 61000-4-15/A1
NORME EUROPÉENNE
EUROPÄISCHE NORM April 2003
ICS 33.100.20
English version
Electromagnetic compatibility (EMC)
Part 4-15: Testing and measurement techniques -
Flickermeter -
Functional and design specifications
(IEC 61000-4-15:1997/A1:2003)
Compatibilité électromagnétique (CEM) Elektromagnetische Verträglichkeit (EMV)
Partie 4-15: Techniques d'essai Teil 4-15: Prüf- und Messverfahren -
et de mesure - Flickermeter -
Flickermètre - Funktionsbeschreibung
Spécifications fonctionnelles und Auslegungsspezifikation
et de conception (IEC 61000-4-15:1997/A1:2003)
(CEI 61000-4-15:1997/A1:2003)
This amendment A1 modifies the European Standard EN 61000-4-15:1998; it was approved by
CENELEC on 2003-03-01. CENELEC members are bound to comply with the CEN/CENELEC Internal
Regulations which stipulate the conditions for giving this amendment the status of a national standard without
any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on
application to the Central Secretariat or to any CENELEC member.

This amendment exists in three official versions (English, French, German). A version in any other language
made by translation under the responsibility of a CENELEC member into its own language and notified to the
Central Secretariat has the same status as the official versions.

CENELEC members are the national electrotechnical committees of Austria, Belgium, Czech Republic,
Denmark, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Luxembourg, Malta,
Netherlands, Norway, Portugal, Slovakia, Spain, Sweden, Switzerland and United Kingdom.

CENELEC
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung

Central Secretariat: rue de Stassart 35, B - 1050 Brussels

© 2003 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members.

Ref. No. EN 61000-4-15:1998/A1:2003 E

Foreword
The text of document 77A/389/FDIS, future amendment 1 to IEC 61000-4-15:1997, prepared by
SC 77A, Low frequency phenomena, of IEC TC 77, Electromagnetic compatibility, was submitted to
the IEC-CENELEC parallel vote and was approved by CENELEC as amendment A1 to
EN 61000-4-15:1998 on 2003-03-01.

The following dates were fixed:

– latest date by which the amendment has to be implemented
at national level by publication of an identical
national standard or by endorsement (dop) 2003-12-01

– latest date by which the national standards conflicting
with the amendment have to be withdrawn (dow) 2006-03-01

Annexes designated "normative" are part of the body of the standard.
In this standard, annex ZA is normative.
Annex ZA has been added by CENELEC.
__________
Endorsement notice
The text of amendment 1:2003 to the International Standard IEC 61000-4-15:1997 was approved by
CENELEC as an amendment to the European Standard without any modification.
__________
- 3 - EN 61000-4-15:1998/A1:2003
Annex ZA
(normative)
Normative references to international publications
with their corresponding European publications

Publication Year Title EN/HD Year
Delete:
IEC 61000-3-3 1994 Electromagnetic compatibility (EMC) EN 61000-3-3 1995
Part 3-3: Limits - Limitation of voltage + corr. July 1997
changes, voltage fluctuations and flicker
in public low-voltage supply systems, for
equipment with rated current <= 16 A
per phase and not subject to conditional
connection
NORME CEI
INTERNATIONALE IEC
61000-4-15
INTERNATIONAL
STANDARD
AMENDEMENT 1
AMENDMENT 1
2003-01
PUBLICATION FONDAMENTALE EN CEM
BASIC EMC PUBLICATION
Amendement 1
Compatibilité électromagnétique (CEM) –
Partie 4-15:
Techniques d'essai et de mesure –
Flickermètre – Spécifications fonctionnelles
et de conception
Amendment 1
Electromagnetic compatibility (EMC) –
Part 4-15:
Testing and measurement techniques –
Flickermeter – Functional and design
specifications
 IEC 2003 Droits de reproduction réservés  Copyright - all rights reserved
International Electrotechnical Commission, 3, rue de Varembé, PO Box 131, CH-1211 Geneva 20, Switzerland
Telephone: [phone] Telefax: [phone] E-mail: [e-mail]  Web: www.iec.ch
CODE PRIX
L
Commission Electrotechnique Internationale
PRICE CODE
International Electrotechnical Commission
Международная Электротехническая Комиссия
Pour prix, voir catalogue en vigueur
For price, see current catalogue

61000-4-15 Amend. 1  IEC:2003 – 3 –
FOREWORD
This amendment has been prepared by subcommittee 77A: Low-frequency phenomena, of IEC
technical committee 77: Electromagnetic compatibility.
The text of this amendment is based on the following documents:
FDIS Report on voting
77A/389/FDIS 77A/399/RVD
Full information on the voting for the approval of this amendment can be found in the report on
voting indicated in the above table.
The committee has decided that the contents of the base publication and its amendments will
remain unchanged until 2006. At this date, the publication will be
• reconfirmed;
• withdrawn;
• replaced by a revised edition, or
• amended.
_____________
Page 3
CONTENTS
Replace the title of Figure 1 and add the title of Figure B.1 as follows:
Figure 1 – Functional diagram of IEC flickermeter
Figure B.1 − Rectangular voltage change ΔV/V = 40 %, 8,8 Hz, 17,6 changes/second
Add, after the figures, the following table titles:
Table 1 – Normalized flickermeter response for sinusoidal voltage fluctuations
Table 2 – Normalized flickermeter response for rectangular voltage fluctuations
Table 3 – Ranges of rated input voltage
Table 4 – Relationship between the range selector values and sensation levels
Table 5 – Test specifications for flickermeter classifier
Table 6 – Insulation tests for input and power supply connection
Table 7 – Immunity assessment tests to electromagnetic interference
Table 8 – Indicative values for the parameters of lamps
Add, after the title of Annex A, the following new elements:
Annex B – Meaning of ΔV/V and number of voltage changes
Bibliography
61000-4-15 Amend. 1  IEC:2003 – 5 –
Page 9
1 Scope and object
Replace the second paragraph by the following:
This section is based partly on work by the “Disturbances” Working Group of the International
Union for Electroheat (UIE), partly on work of the IEEE, and partly on work within IEC itself.
The flickermeter specifications in this section relate only to measurements of 230 V, 50 Hz
inputs and 120 V, 60 Hz inputs; specifications for other voltages and other frequencies are
under consideration.
2 Normative references
Delete, from the existing list, the following standard:
IEC 61000-3-3:1994, Electromagnetic compatibility (EMC) – Part 3: Limits – Section 3:
Limitation of voltage fluctuations and flicker in low-voltage supply systems for equipment with
rated current ≤ 16 A
Page 13
3.2 Block 1 – Input voltage adaptor and calibration checking circuit
Delete the existing note.
3.4 Blocks 3 and 4 – Weighting filters, squaring and smoothing
Change the first sentence of the third paragraph to read as follows:
The second filter is a weighting filter block th
...