EN 62317-2:2010

Ferrite cores - Dimensions - Part 2: Pot-cores for use in telecommunications, power supply, and filter applications

IEC 62317-2:2010 specifies the dimensions that are of importance for mechanical interchangeability for a preferred range of pot-cores made of ferrite, and the dimensional limits for coil formers to be used with them. The selection of core sizes for this standard is based on the philosophy of including those sizes which are industrial standards, either by inclusion in a national standard, or by broad-based use in industry. See IEC 62317-1 for more detail concerning the philosophy of selecting core sizes to be included. This first edition cancels and replaces the fourth edition of IEC 60133 published in 2000. The main changes with respect to the previous edition of IEC 60133 are listed below: - changed 'e dimension' of P4,6/3,1 in Table 6 from 3,20 Max. to 3,40 Max.; - removed 'derived standards' from Annex B (informative) in the fourth edition of IEC 60133; - changed the name of core parts in Subclause 3.1.2 from 'Grooves' to 'Wire-ways' in accordance with IEC 62317-1 Subclause 5.6.

Ferritkerne - Maße - Teil 2: Schalenkerne für die Verwendung in Telekommunikations-, Stromversorgungs- und Filteranwendungen

Noyaux ferrites - Dimensions - Partie 2: Circuits magnétiques en pots utilisés dans des applications de télécommunications, d'alimentation électrique et de filtre

La CEI 62317-2:2010 spécifie les dimensions qui présentent une importance pour l'interchangeabilité mécanique d'une gamme préférentielle de circuits magnétiques en pots réalisés en oxydes magnétiques, ainsi que les limites dimensionnelles pour des carcasses à utiliser avec ces pots. Le choix des tailles des noyaux pour la présente norme est fondé sur la philosophie consistant à introduire les tailles qui correspondent à des normes industrielles, soit par une prise en compte dans une norme nationale, soit par le biais d'une utilisation à grande échelle dans l'industrie. Voir la CEI 62317-1 pour plus de détails concernant ce principe de choix des tailles de noyaux à inclure. La présente édition annule et remplace la quatrième édition de la CEI 60133 publiée en 2000. Les principales modifications par rapport à la précédente édition de la CEI 60133 sont énumérées ci-dessous: - au Tableau 6, changer la dimension 'e' du P4,6/3,1 de 3,20 Max. à 3,40 Max.; - enlever l'Annexe B (informative) 'Normes dérivées' dans l'édition quatre de la CEI 60133; - dans la Paragraphe 3.1.2 du texte anglais, changer 'Grooves' en 'Wire-ways' conformément à la Paragraphe 5.6 de la CEI 62317-1.

Feritna jedra - Mere - 2. del: Lončasta jedra za uporabo v telekomunikacijah, električnih napajalnikih in filtrih (IEC 62317-2:2010)

Ta del IEC 62317 določa mere, ki so pomembne za mehansko medsebojno zamenljivost za prednostni razpon lončarskih jeder, izdelanih iz ferita, in meje mer za modele navojev, ki se uporabljajo z njimi. Izbor velikosti jeder za ta standard je osnovan na filozofiji vključevanja tistih velikosti, ki so industrijski standardi, z vključitvijo v državni standard ali s širšo uporabo v industriji. Glej IEC 62317-1 za več podrobnosti glede filozofije izbora vključitve velikosti jeder. Splošni vidiki, na katerih je načrt tega razpona jeder osnovan, je podan v dodatku A.

General Information

• Status: Withdrawn
• Publication Date: 15-Jul-2010
• Withdrawal Date: 30-Jun-2013
• ICS: 29.100.10 - Magnetic components
• Technical Committee: CLC/SR 51 - Magnetic components and ferrite materials
• Drafting Committee: IEC/TC 51 - IEC_TC_51
• Parallel Committee: IEC/TC 51 - IEC_TC_51
• Current Stage: 9960 - Withdrawal effective - Withdrawal
• Start Date: 01-May-2023
• Completion Date: 01-May-2023
• Ref Project: SIST EN 62317-2:2010 - Ferrite cores - Dimensions - Part 2: Pot-cores for use in telecommunications, power supply, and filter applications (IEC 62317-2:2010)

Relations

• Replaces: EN 60133:2001 - Dimensions of pot-cores made of magnetic oxides and associated parts
• Effective Date: 28-Jan-2023
• Replaced By: EN IEC 63093-2:2020 - Ferrite cores - Guidelines on dimensions and the limits of surface irregularities - Part 2: Pot-cores for use in telecommunications, power supply, and filter applications
• Effective Date: 07-Jun-2022

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN 62317-2:2010
01-september-2010
1DGRPHãþD
SIST EN 60133:2002
)HULWQDMHGUD0HUHGHO/RQþDVWDMHGUD]DXSRUDERYWHOHNRPXQLNDFLMDK
HOHNWULþQLKQDSDMDOQLNLKLQILOWULK,(&
Ferrite cores - Dimensions - Part 2: Pot-cores for use in telecommunications, power
supply, and filter applications (IEC 62317-2:2010)
Ferritkerne - Maße - Teil 2: Schalenkerne für die Verwendung in Telekommunikations-,
Stromversorgungsund Filteranwendungen (IEC 62317-2:2010)
Noyaux ferrites - Dimensions - Partie 2: Circuits magnétiques en pots utilisés dans des
applications de télécommunications, d'alimentation électrique et de filtre (CEI 62317-
2:2010)
Ta slovenski standard je istoveten z: EN 62317-2:2010
ICS:
29.100.10 Magnetne komponente Magnetic components
SIST EN 62317-2:2010 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN 62317-2:2010

---------------------- Page: 2 ----------------------

SIST EN 62317-2:2010

EUROPEAN STANDARD
EN 62317-2

NORME EUROPÉENNE
July 2010
EUROPÄISCHE NORM

ICS 29.100.10


English version


Ferrite cores -
Dimensions -
Part 2: Pot-cores for use in telecommunications, power supply,
and filter applications
(IEC 62317-2:2010)


Noyaux ferrites -  Ferritkerne -
Dimensions - Maße -
Partie 2: Circuits magnétiques en pots Teil 2: Schalenkerne für die Verwendung
utilisés dans des applications in Telekommunikations-,
de télécommunications, d'alimentation Stromversorgungs-
électrique et de filtre und Filteranwendungen
(CEI 62317-2:2010) (IEC 62317-2:2010)




This European Standard was approved by CENELEC on 2010-07-01. CENELEC members are bound to comply
with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard
the status of a national standard without any alteration.

Up-to-date lists and bibliographical references concerning such national standards may be obtained on
application to the Central Secretariat or to any CENELEC member.

This European Standard exists in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CENELEC member into its own language and notified
to the Central Secretariat has the same status as the official versions.

CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus,
the Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy,
Latvia, Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia,
Spain, Sweden, Switzerland and the United Kingdom.

CENELEC
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung

Management Centre: Avenue Marnix 17, B - 1000 Brussels


© 2010 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members.
Ref. No. EN 62317-2:2010 E

---------------------- Page: 3 ----------------------

SIST EN 62317-2:2010
EN 62317-2:2010 - 2 -
Foreword
The text of document 51/980/FDIS, future edition 1 of IEC 62317-2, prepared by IEC TC 51, Magnetic
components and ferrite materials, was submitted to the IEC-CENELEC parallel vote and was approved by
CENELEC as EN 62317-2 on 2010-07-01.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN and CENELEC shall not be held responsible for identifying any or all such patent
rights.
The following dates were fixed:
– latest date by which the EN has to be implemented
at national level by publication of an identical
(dop) 2011-04-01
national standard or by endorsement
– latest date by which the national standards conflicting
(dow) 2013-07-01
with the EN have to be withdrawn
Annex ZA has been added by CENELEC.
__________
Endorsement notice
The text of the International Standard IEC 62317-2:2010 was approved by CENELEC as a European
Standard without any modification.
__________

---------------------- Page: 4 ----------------------

SIST EN 62317-2:2010
- 3 - EN 62317-2:2010
Annex ZA
(normative)
Normative references to international publications
with their corresponding European publications

The following referenced documents are indispensable for the application of this document. For dated
references, only the edition cited applies. For undated references, the latest edition of the referenced
document (including any amendments) applies.

NOTE  When an international publication has been modified by common modifications, indicated by (mod), the relevant EN/HD
applies.

Publication Year Title EN/HD Year

IEC 60205 - Calculation of the effective
...