EN IEC 63067:2020
(Main)Electrical installations for lighting and beaconing of aerodromes - Connecting devices - General requirements and tests
Electrical installations for lighting and beaconing of aerodromes - Connecting devices - General requirements and tests
IEC 63067:2020 applies to plugs and receptacles for single or multiple pole connecting devices used for aeronautical ground lighting applications. Additional requirements and usage of connecting devices are given in different parts of IEC 61820 series. Connecting devices complying with this document are suitable for use in environmental class E11 according to IEC 61820-1.
Elektrische Anlagen für Beleuchtung und Befeuerung von Flugplätzen - Steckverbinder - Allgemeine Anforderungen und Prüfungen
Installations électriques pour l'éclairage et le balisage des aérodromes - Dispositifs de connexion - Exigences générales et essais
L'IEC 63067:2020 s'applique aux fiches et embases pour dispositifs de connexion unipolaires ou multipolaires utilisés dans le cadre d'applications de balisage aéronautique au sol. Les exigences complémentaires et l'utilisation des dispositifs de connexion sont définies dans différentes parties de la série IEC 61820. Les dispositifs de connexion conformes au présent document sont adaptés à une utilisation dans des conditions d'environnement de classe E11, conformément à l'IEC 61820-1.
Električne inštalacije za razsvetljavo in radijske javljalnike na letališčih - Povezovalne naprave - Splošne zahteve in preskusi (IEC 63067:2020)
General Information
Standards Content (Sample)
SLOVENSKI STANDARD
01-november-2020
Električne inštalacije za razsvetljavo in radijske javljalnike na letališčih -
Povezovalne naprave - Splošne zahteve in preskusi (IEC 63067:2020)
Electrical installations for lighting and beaconing of aerodromes - Connecting devices -
General requirements and tests (IEC 63067:2020)
Elektrische Anlagen für Beleuchtung und Befeuerung von Flugplätzen - Steckverbinder -
Allgemeine Anforderungen und Prüfungen (IEC 63067:2020)
Installations électriques pour l'éclairage et le balisage des aérodromes - Dispositifs de
connexion - Exigences générales et essais (IEC 63067:2020)
Ta slovenski standard je istoveten z: EN IEC 63067:2020
ICS:
29.140.50 Instalacijski sistemi za Lighting installation systems
razsvetljavo
93.120 Gradnja letališč Construction of airports
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
EUROPEAN STANDARD EN IEC 63067
NORME EUROPÉENNE
EUROPÄISCHE NORM
August 2020
ICS 29.140.50; 93.120
English Version
Electrical installations for lighting and beaconing of aerodromes -
Connecting devices - General requirements and tests
(IEC 63067:2020)
Installations électriques pour l'éclairage et le balisage des Elektrische Anlagen für Beleuchtung und Befeuerung von
aérodromes - Dispositifs de connexion - Exigences Flugplätzen - Steckverbinder - Allgemeine Anforderungen
générales et essais und Prüfungen
(IEC 63067:2020) (IEC 63067:2020)
This European Standard was approved by CENELEC on 2020-07-29. CENELEC members are bound to comply with the CEN/CENELEC
Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC
Management Centre or to any CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the
same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic,
Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the
Netherlands, Norway, Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and the United Kingdom.
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2020 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members.
Ref. No. EN IEC 63067:2020 E
European foreword
The text of document 97/216/FDIS, future edition 1 of IEC 63067, prepared by IEC/TC 97 "Electrical
installations for lighting and beaconing of aerodromes" was submitted to the IEC-CENELEC parallel
vote and approved by CENELEC as EN IEC 63067:2020.
The following dates are fixed:
• latest date by which the document has to be implemented at national (dop) 2021-04-29
level by publication of an identical national standard or by endorsement
• latest date by which the national standards conflicting with the (dow) 2023-07-29
document have to be withdrawn
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CENELEC shall not be held responsible for identifying any or all such patent rights.
Endorsement notice
The text of the International Standard IEC 63067:2020 was approved by CENELEC as a European
Standard without any modification.
In the official version, for Bibliography, the following notes have to be added for the standards
indicated:
IEC 60445 NOTE Harmonized as EN 60445
IEC 61820 (series) NOTE Harmonized as EN IEC 61820 (series)
IEC 61823 NOTE Harmonized as EN 61823
ISO 9001 NOTE Harmonized as EN ISO 9001
Annex ZA
(normative)
Normative references to international publications with their
corresponding European publications
The following documents are referred to in the text in such a way that some or all of their content
constitutes requirements of this document. For dated references, only the edition cited applies. For
undated references, the latest edition of the referenced document (including any amendments)
applies.
NOTE 1 Where an International Publication has been modified by common modifications, indicated by (mod),
the relevant EN/HD applies.
NOTE 2 Up-to-date information on the latest versions of the European Standards listed in this annex is available
here: www.cenelec.eu.
Publication Year Title EN/HD Year
IEC 60352-2 2006 Solderless connections - Part 2: Crimped EN 60352-2 2006
connections - General requirements, test
methods and practical guidance
IEC 60529 - Degrees of protection provided by enclosures - -
(IP Code)
IEC 61820-1 - Electrical installations for aeronautical ground EN IEC 61820-1 -
lighting at aerodromes - Part 1: Fundamental
principles
ISO 2859-1 - Sampling procedures for inspection by - -
attributes; part 1: sampling plans indexed by
acceptable quality level (AQL) for lot-by-lot
inspection
IEC 63067 ®
Edition 1.0 2020-06
INTERNATIONAL
STANDARD
NORME
INTERNATIONALE
Electrical installations for lighting and beaconing of aerodromes – Connecting
devices – General requirements and tests
Installations électriques pour l'éclairage et le balisage des aérodromes –
Dispositifs de connexion – Exigences générales et essais
INTERNATIONAL
ELECTROTECHNICAL
COMMISSION
COMMISSION
ELECTROTECHNIQUE
INTERNATIONALE
ICS 29.140.50; 93.120 ISBN 978-2-8322-8516-9
– 2 – IEC 63067:2020 © IEC 2020
CONTENTS
FOREWORD . 4
INTRODUCTION . 6
1 Scope . 7
2 Normative references . 7
3 Terms and definitions . 7
4 General requirements . 8
5 General remarks on tests . 9
6 Ratings . 9
7 Classification . 9
8 Marking and documentation . 10
9 Checking of dimensions . 11
10 Protection against electric shock . 13
11 Provision for continuity of screened cable . 13
12 Terminations of conductors . 14
12.1 General . 14
12.2 Terminations for connecting devices which are attached to conductor(s) on
the field. 14
12.3 Terminals for screen continuity . 14
13 Construction of connecting device and their assemblies . 15
13.1 Housing . 15
13.2 Pins and sockets . 15
13.3 Caps . 15
13.4 Connecting device assemblies . 15
13.4.1 Class A . 15
13.4.2 Class B . 16
14 Protection against ingress of water . 17
15 Insulation resistance and electrical connection of connecting device assembly . 17
15.1 General . 17
15.2 Insulation resistance of plugs and receptacles . 17
15.3 Insulation resistance of connecting device assembly . 18
15.4 Electrical connection of contact assembly . 19
16 Forces necessary to disengage and engage the parts of the connecting devices . 19
17 Cables and their connection . 20
18 Resistance to weathering, corrosion and chemical materials . 21
19 Resistance to UV-radiation . 21
Annex A (normative) Production test . 22
A.1 General . 22
A.2 Production test . 22
A.2.1 Dielectric test . 22
A.2.2 Continuity test . 22
A.2.3 Test results. 22
Bibliography . 23
IEC 63067:2020 © IEC 2020 – 3 –
Figure 1 – Primary plug (IEC 61823) . 11
Figure 2 – Primary receptacle (IEC 61823) . 11
Figure 3 – Secondary plug . 12
Figure 4 – Secondary receptacle. 12
Figure 5 – Secondary receptacle with moulded frangible coupler . 13
Figure 6 – Example of test arrangement to verify the fixation of pins in the body of the
insertion piece . 17
Figure 7 – Example of voltage drop test arrangement . 19
Figure 8 – Example of apparatus for verification of withdrawal force . 20
Table 1 – Classification of connecting devices . 10
Table 2 – Interface dimensions of primary plug and receptacle . 12
Table 3 – Interface dimensions for secondary plugs and receptacles . 13
– 4 – IEC 63067:2020 © IEC 2020
INTERNATIONAL ELECTROTECHNICAL COMMISSION
____________
ELECTRICAL INSTALLATIONS
FOR LIGHTING AND BEACONING OF AERODROMES –
CONNECTING DEVICES – GENERAL REQUIREMENTS AND TESTS
FOREWORD
1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising
all national electrotechnical committees (IEC National Committees). The object of IEC is to promote
international co-operation on all questions concerning standardization in the electrical and electronic fields. To
this end and in addition to other activities, IEC publishes International Standards, Technical Specifications,
Technical Reports, Publicly Available Specifications (PAS) and Guides (hereafter referred to as "IEC
Publication(s)"). Their preparation is entrusted to technical committees; any IEC National Committee interested
in the subject dealt with may participate in this preparatory work. International, governmental and non-
governmental orga
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.