EN 60601-2-52:2010/A1:2015

Medical electrical equipment - Part 2-52: Particular requirements for the basic safety and essential performance of medical beds

IEC 60601-2-52:2009 applies to the basic safety and essential performance of medical beds intended for adults. This first edition cancels and replaces the first edition of IEC 60601-2-38, published in 1996, and its Amendment 1 (1999). This edition constitutes a technical revision. IEC 60601-2-52:2009 is the realization of much work in alignment, and scope adjustment between IEC 60601-2-38, EN 1970, and the third edition of IEC 60601-1.

Medizinische elektrische Geräte - Teil 2-52: Besondere Festlegungen für die Sicherheit einschließlich der wesentlichen Leistungsmerkmale von medizinischen Betten

Appareils électromédicaux - Partie 2-52: Exigences particulières de sécurité de base et de performances essentielles des lits médicaux

La CEI 60601-2-52:2009 s'applique à la sécurité de base et aux performances essentielles des lits medicaux destinés aux adultes. Cette première édition annule et remplace la première édition de la CEI 60601-2-38, parue en 1996, et son Amendement (1999). Elle constitue une révision technique. La CEI 60601-2-52:2009 est la réalisation d'un travail important d'alignement et d'ajustement de domaines d'application entre la CEI 60601-2-38, la EN 1970, et la troisième édition de la CEI 60601-1.

Medicinska električna oprema - 2-52. del: Posebne zahteve za osnovno varnost in bistvene lastnosti medicinskih postelj - Dopolnilo A1

General Information

• Status: Published
• Publication Date: 14-May-2015
• Withdrawal Date: 21-Apr-2018
• ICS: 11.140 - Hospital equipment
• Technical Committee: CLC/TC 62 - Electrical equipment in medical practice
• Drafting Committee: IEC/SC 62D - IEC_SC_62D
• Current Stage: 6060 - Document made available - Publishing
• Start Date: 15-May-2015
• Completion Date: 15-May-2015
• Directive: 93/42/EEC - Council Directive 93/42/EEC of 14 June 1993 concerning medical devices
• Mandate: M/467 - Standardisation mandate addressed to CEN and CENELEC: modification and completion of EN 60601-2-52 to prevent entrapment of children and of adults with an atypical anatomy in medical beds and entrapment of children in medical cots
• Ref Project: SIST EN 60601-2-52:2010/A1:2015 - Medical electrical equipment - Part 2-52: Particular requirements for basic safety and essential performance of medical beds

Relations

• Amends: EN 60601-2-52:2010 - Medical electrical equipment - Part 2-52: Particular requirements for basic safety and essential performance of medical beds (IEC 60601-2-52:2009)
• Effective Date: 28-Jan-2023

Standards Content (Sample)

SLOVENSKI STANDARD
01-september-2015
0HGLFLQVNDHOHNWULþQDRSUHPDGHO3RVHEQH]DKWHYH]DRVQRYQRYDUQRVWLQ
ELVWYHQHODVWQRVWLPHGLFLQVNLKSRVWHOM'RSROQLOR$
Medical electrical equipment - Part 2-52: Particular requirements for basic safety and
essential performance of medical beds
Medizinische elektrische Geräte - Teil 2-52: Besondere Festlegungen für die Sicherheit
einschließlich der wesentlichen Leistungsmerkmale von medizinischen Betten
Appareils électromédicaux - Partie 2-52: Exigences particulières pour la sécurité de base
et les performances essentielles des lits médicaux
Ta slovenski standard je istoveten z: EN 60601-2-52:2010/A1:2015
ICS:
11.140 Oprema bolnišnic Hospital equipment
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

EUROPEAN STANDARD EN 60601-2-52:2010/A1

NORME EUROPÉENNE
EUROPÄISCHE NORM
May 2015
ICS 11.140
English Version
Medical electrical equipment -
Part 2-52: Particular requirements for the basic safety and
essential performance of medical beds
(IEC 60601-2-52:2009/A1:2015)
Appareils électromédicaux -  Medizinische elektrische Geräte -
Partie 2-52: Exigences particulières de sécurité de base et Teil 2-52: Besondere Festlegungen für die Sicherheit
de performances essentielles des lits médicaux einschließlich der wesentlichen Leistungsmerkmale von
(IEC 60601-2-52:2009/A1:2015) medizinischen Betten
(IEC 60601-2-52:2009/A1:2015)
This amendment A1 modifies the European Standard EN 60601-2-52:2010; it was approved by CENELEC on 2015-04-22. CENELEC
members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this amendment the
status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC
Management Centre or to any CENELEC member.
This amendment exists in three official versions (English, French, German). A version in any other language made by translation under the
responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the same status as
the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic,
Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and the United Kingdom.

European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2015 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members.
Ref. No. EN 60601-2-52:2010/A1:2015 E

Foreword
The text of document 62D/1186/FDIS, future IEC 60601-2-52:2009/A1, prepared by
SC 62D "Electromedical equipment" of IEC/TC 62 "Electrical equipment in medical practice" was
submitted to the IEC-CENELEC parallel vote and approved by CENELEC as
The following dates are fixed:
• latest date by which the document has to be (dop) 2016-01-22
implemented at national level by
publication of an identical national
standard or by endorsement
(dow) 2018-04-22
• latest date by which the national
standards conflicting with the
document have to be withdrawn
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CENELEC [and/or CEN] shall not be held responsible for identifying any or all such
patent rights.
This document has been prepared under a mandate given to CENELEC by the European Commission
and the European Free Trade Association, and supports essential requirements of EU Directive.

For the relationship with EU Directive see informative Annex ZZ, included in EN 60601-2-52:2010.

Endorsement notice
The text of the International Standard IEC 60601-2-52:2009/A1:2015 was approved by CENELEC as
a European Standard without any modification.

IEC 60601-2-52
Edition 1.0 2015-03
INTERNATIONAL
STANDARD
NORME
INTERNATIONALE
A MENDMENT 1
AM ENDEMENT 1
Medical electrical equipment –

Part 2-52: Particular requirements for the basic safety and essential performance

of medical beds
Appareils électromédicaux –
Partie 2-52: Exigences particulières de sécurité de base et de performances

essentielles des lits médicaux

INTERNATIONAL
ELECTROTECHNICAL
COMMISSION
COMMISSION
ELECTROTECHNIQUE
INTERNATIONALE
ICS 11.140 ISBN 978-2-8322-2390-1

– 2 – IEC 60601-2-52:2009/AMD1:2015
© IEC 2015
FOREWORD
This amendment has been prepared by subcommittee 62D: Electromedical equipment, of IEC
technical committee 62: Electrical equipment in medical practice.
The text of this amendment is based on the following documents:
FDIS Report on voting
62D/1186/FDIS 62D/1232/RVD
Full information on the voting for the approval of this amendment can be found in the report
on voting indicated in the above table.
The committee has decided that the contents of this amendment and the base publication will
remain unchanged until the stability date indicated on the IEC web site under
"http://webstore.iec.ch" in the data related to the specific publication. At this date, the
publication will be
• reconfirmed,
• withdrawn,
• replaced by a revised edition, or
• amended.
_____________
201.1.1 * Scope
Replace the existing te
...