iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
CLC

EN 60127-1:1991

(Main)

Miniature fuses - Part 1: Definitions for miniature fuses and general requirements for miniature fuse-links

Miniature fuses - Part 1: Definitions for miniature fuses and general requirements for miniature fuse-links

This standard relates to miniature fuses for the protection of electric appliances, electronic equipment and component parts thereof normally intended to be used indoors. It relates to general requirements applicable to all fuses, which fall under the category of miniature fuses. Specific details covering each major subdivision are given in subsequent parts.

Geräteschutzsicherungen - Teil 1: Begriffe für Geräteschutzsicherungen und allgemeine Anforderungen an G-Sicherungseinsätze

Coupe-circuit miniatures - Partie 1: Définitions pour coupe-circuit miniatures et prescriptions générales pour éléments de remplacement miniatures

La présente norme s'applique aux coupe-circuit miniatures employés pour la protection d'appareils électriques, de matériels électroniques et de leurs éléments constituants, normalement destinés à être utilisés à l'intérieur. Elle s'applique aux prescriptions générales applicables à tous les modèles de coupe-circuit miniatures. Des détails spéciaux concernant chaque subdivision principale seront indiqués dans les parties qui suivront.

Miniature fuses -- Part 1: Definitions for miniature fuses and general requirements for miniature fuse-links

General Information

Status
Withdrawn
Publication Date
26-Mar-1991
Withdrawal Date
29-Feb-1992
ICS
29.120.50 - Fuses and other overcurrent protection devices
Technical Committee
CLC/SR 32C - Miniature fuses
Drafting Committee
IEC/SC 32C - IEC_SC_32C
Parallel Committee
IEC/SC 32C - IEC_SC_32C
Current Stage
9960 - Withdrawal effective - Withdrawal
Start Date
01-Jul-2009
Completion Date
01-Jul-2009
Directive
2006/95/EC - Directive 2006/95/EC of the European Parliament and of the Council of 12 December 2006 on the harmonisation of the laws of Member States relating to electrical equipment designed for use within certain voltage limits (codified version)
73/23/EEC - Electrical equipment designed for use within certain voltage limits
Ref Project
SIST EN 60127-1:1995 - Miniature fuses -- Part 1: Definitions for miniature fuses and general requirements for miniature fuse-links

Relations

Replaced By
EN 60127-1:2006 - Miniature fuses - Part 1: Definitions for miniature fuses and general requirements for miniature fuse-links
Effective Date
28-Jan-2023
Amended By
EN 60127-1:1991/A2:2003 - Miniature fuses - Part 1: Definitions for miniature fuses and general requirements for miniature fuse-links
Effective Date
29-Jan-2023
Amended By
EN 60127-1:1991/A1:1999 - Miniature fuses - Part 1: Definitions for miniature fuses and general requirements for miniature fuse-links
Effective Date
29-Jan-2023

Buy Standard

EN 60127-1:1995EN 60127-1:1995
PreviousNext
Standard
EN 60127-1:1995
English language
29 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN 60127-1:1995
01-december-1995
Miniature fuses -- Part 1: Definitions for miniature fuses and general requirements
for miniature fuse-links
Miniature fuses -- Part 1: Definitions for miniature fuses and general requirements for
miniature fuse-links
Geräteschutzsicherungen -- Teil 1: Begriffe für Geräteschutzsicherungen und allgemeine
Anforderungen an G-Sicherungseinsätze
Coupe-circuit miniatures -- Partie 1: Définitions pour coupe-circuit miniatures et
prescriptions générales pour éléments de remplacement miniatures
Ta slovenski standard je istoveten z: EN 60127-1:1991
ICS:
29.120.50 9DURYDONHLQGUXJD Fuses and other overcurrent
PHGWRNRYQD]DãþLWD protection devices
SIST EN 60127-1:1995 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN 60127-1:1995

---------------------- Page: 2 ----------------------

SIST EN 60127-1:1995

---------------------- Page: 3 ----------------------

SIST EN 60127-1:1995

---------------------- Page: 4 ----------------------

SIST EN 60127-1:1995

---------------------- Page: 5 ----------------------

SIST EN 60127-1:1995

---------------------- Page: 6 ----------------------

SIST EN 60127-1:1995

---------------------- Page: 7 ----------------------

SIST EN 60127-1:1995

---------------------- Page: 8 ----------------------

SIST EN 60127-1:1995

---------------------- Page: 9 ----------------------

SIST EN 60127-1:1995

---------------------- Page: 10 ----------------------

SIST EN 60127-1:1995

---------------------- Page: 11 ----------------------

SIST
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

CLC
EN IEC 60691:2023(Main)
Thermal-links - Requirements and application guide
SIST EN IEC 60691:2024

IEC 60691:2023 is available as IEC 60691:2023 RLV which contains the International Standard and its Redline version, showing all changes of the technical content compared to the previous edition.IEC 60691:2023 is applicable to thermal-links intended for incorporation in electrical appliances, electronic equipment and component parts thereof, normally intended for use indoors, in order to protect them against excessive temperatures under abnormal conditions. NOTE 1 The equipment is not designed to generate heat. NOTE 2 The effectiveness of the protection against excessive temperatures logically depends upon the position and method of mounting of the thermal-link, as well as upon the current which it is carrying. This document may be applicable to thermal-links for use under conditions other than indoors, provided that the climatic and other circumstances in the immediate surroundings of such thermal-links are comparable with those in this standard. This document may be applicable to thermal-links in their simplest forms (e.g. melting strips or wires), provided that molten materials expelled during function cannot adversely interfere with the safe use of the equipment, especially in the case of hand-held or portable equipment, irrespective of its position.

  • Standard
    50 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN 60127-2:2014/A1:2023(Amendment)
Miniature fuses - Part 2: Cartridge fuse-links
SIST EN 60127-2:2015/A1:2024

NEXT ACTION: HAS CONSULTANT ASSESSMENT BY 2020-01-29
2020-07-06 link to LVD added, asked SR for ZZ and ZA

  • Amendment
    13 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN 60127-3:2015/A1:2020(Amendment)
Miniature fuses - Part 3: Sub-miniature fuse-links
SIST EN 60127-3:2015/A1:2020
  • Amendment
    8 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN 60691:2016/A1:2019(Amendment)
Thermal-links - Requirements and application guide
SIST EN 60691:2017/A1:2019

"Compliant" assessment received on 2018-07-20
The project can be published and offered for its citation in the OJEU.

  • Amendment
    9 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN IEC 60127-8:2018(Main)
Miniature fuses - Part 8: Fuse resistors with particular overcurrent protection
SIST EN IEC 60127-8:2019

IEC 60127-8:2018(E) relates to fuse resistors with particular overcurrent protection rated up to AC 500 V and/or DC 500 V for printed circuits and other substrate systems, used for the protection of electric appliances, electronic equipment and component parts thereof, normally intended to be used indoors. It does not apply to fuse resistors with particular overcurrent protection for appliances intended to be used under special conditions, such as in a corrosive or explosive atmosphere. The object of this part of IEC 60127 is a) to establish uniform requirements for fuse resistors with particular overcurrent protection so as to protect appliances or parts of appliances in the most suitable way; b) to define the performance of the fuse resistors with particular overcurrent protection, so as to give guidance to manufacturers of electrical appliances and electronic equipment and to ensure replacement of fuse resistors with particular overcurrent protection by those of similar dimensions and characteristics; c) to establish uniform test methods for fuse resistors with particular overcurrent protection, so as to allow verification of the values (for example rated dissipation, functioning characteristic and rated breaking capacity values) specified by the manufacturer. This part of IEC 60127 applies in addition to the requirements of IEC 60127-1. This first edition of IEC 60127-8 cancels and replaces IEC PAS 60127-8:2014. This international standard is to be used in conjunction with IEC 60127-1. Keywords: Miniature Fuses, Fuse-Resistors, Overcurrent Protection

  • Standard
    29 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN 60127-5:2017(Main)
Miniature fuses - Part 5: Guidelines for quality assessment of miniature fuse-links
SIST EN 60127-5:2017

IEC 60127-5:2016 gives a guide for tests for assessing the quality of miniature fuse-links other than type tests, for the case where there is no complete agreement between the user and the manufacturer on what such tests apply. This document provides guidelines and limits generally acceptable for quality control purposes by large scale users and manufacturers of miniature fuse-links. This document has validity for large scale series with lot sizes of 10 000 and more. It is also applicable for smaller lot sizes, if necessary. Periodic inspections by reduced type tests (Clause 5) are intended to be carried out periodically in order to ensure that the level of technical performance previously verified by complete type tests as given in subsequent parts of the IEC 60127 series is maintained. The frequency of periodic in relation to lot-by-lot inspections is not established in this document. This second edition cancels and replaces the first edition published in 1988. This edition constitutes a technical revision. This edition includes the following significant technical changes with respect to the previous edition: - addition of new tables in 4.3; - addition of new tables in Clause 5. Keywords: quality of miniature fuse-links

  • Standard
    15 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN 60691:2016(Main)
Thermal-links - Requirements and application guide
SIST EN 60691:2017

IEC 60694:2015 is applicable to thermal-links intended for incorporation in electrical appliances, electronic equipment and component parts thereof, normally intended for use indoors, in order to protect them against excessive temperatures under abnormal conditions. This standard may be applicable to thermal-links for use under conditions other than indoors, provided that the climatic and other circumstances in the immediate surroundings of such thermal-links are comparable with those in this standard. This standard may be applicable to thermal-links in their simplest forms (e.g. melting strips or wires), provided that molten materials expelled during function cannot adversely interfere with the safe use of the equipment, especially in the case of hand-held or portable equipment, irrespective of its position. Annex H of this standard is applicable to thermal-link packaged assemblies where the thermal-link(s) has already been approved to this standard but packaged in a metallic or non-metallic housing and provided with terminals/wiring leads. This standard is applicable to thermal-links with a rated voltage not exceeding 690 V a.c. or d.c. and a rated current not exceeding 63 A. The objectives of this standard are: to establish uniform requirements for thermal-links, to define methods of test, to provide useful information for the application of thermal-links in equipment. This standard is not applicable to thermal-links used under extreme conditions such as corrosive or explosive atmospheres. This standard is not applicable to thermal-links to be used in circuits on a.c. with a frequency lower than 45 Hz or higher than 62 Hz. This fourth edition cancels and replaces the third edition published in 2002, Amendment 1:2006 and Amendment 2:2010. This fourth edition constitutes a technical revision. This fourth edition includes the following significant technical changes with respect to the previous edition: - requirements for thermal-link packaged assemblies; - renew the requirements and definitions for Th-test; - change starting temperature for interrupt current test; - clarify requirements for marking (packing label); - minimum Proof Tracking Index 175 instead 120. Keywords: thermal protection of equipment, thermal-links

  • Standard
    49 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN 60127-7:2016(Main)
Miniature fuses - Part 7: Miniature fuse-links for special applications
SIST EN 60127-7:2016

IEC 60127-7:2015(E) covers requirements for miniature fuse-links for special applications. This part of IEC 60127 is applicable to fuse-links with a rated voltage not exceeding 1 000 V, a rated current not exceeding 20 A and a rated breaking capacity not exceeding 50 kA. It does not apply to fuses completely covered by the subsequent parts of IEC 60269-1. It does not apply to miniature fuse-links for appliances intended to be used under special conditions, such as in corrosive or explosive atmospheres. This part of IEC 60127 applies in addition to the requirements of IEC 60127-1. Miniature fuse-links for special applications are not intended to be replaced by the end-user of an electrical/electronic appliance. The object of this part of IEC 60127 is to establish uniform test methods for miniature fuse-links for special applications, so as to allow verification of the values (for example melting time and breaking capacity values) specified by the manufacturer. This second edition cancels and replaces the first edition published in 2013. This edition includes the following significant technical changes with respect to the previous edition: - defining a test board for surface mount fuse-links, Figure 2; - defining test schedules for homogenous series. This publication is to be read in conjunction with IEC 60127-1:2006. Keywords: fuse-links with a rated voltage not exceeding 1 000 V, a rated current not exceeding 20 A and a rated breaking capacity not exceeding 50 kA.

  • Standard
    32 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN 60127-1:2006/A2:2015(Amendment)
Miniature fuses - Part 1: Definitions for miniature fuses and general requirements for miniature fuse-links
SIST EN 60127-1:2007/A2:2015
  • Amendment
    5 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN 60127-3:2015(Main)
Miniature fuses - Part 3: Sub-miniature fuse-links
SIST EN 60127-3:2015

IEC 60127-3:2015 is applicable to sub-miniature fuse-links adapted to printed circuits and used for the protection of electric appliances, electronic equipment and component parts thereof, normally intended to be used indoors. It does not apply to sub-miniature fuse-links for appliances intended to be used under special conditions, such as in a corrosive or explosive atmosphere. This standard applies in addition to the requirements of IEC 60127-1. The object of this standard is to define special and additional test methods for sub-miniature fuse-links applying in addition to the requirements of IEC 60127-1. This third edition of IEC 60127-3 cancels and replaces the first edition published in 1988, its Amendment 1 (1991) and Amendment 2 (2002). This edition includes the following significant technical changes with respect to the previous edition: - add a rectangular shape fuse-link as alternative in standard sheets 3 and 4; - add a small cartridge fuse-link as alternative in standard sheets 2, 3 and 4; - add the rated currents up to 10A in standard sheets 2, 3 and 4; - add Subclause 6.5; - add Subclause 9.7; - the extra samples for termination test (E1 to E6) will be chosen by random and not sorted by voltage drop in Table 1, 2, 3, and 4. Keywords: sub-miniature fuse-links adapted to printed circuits, protection of electric appliances, electronic equipment and component parts This publication is to be read in conjunction with IEC 60127-1:2006.

  • Standard
    31 pages
    English language
    sale 10% off
    e-Library read for
    1 day