EN 62317-8:2006
(Main)Ferrite cores - Dimensions - Part 8: E-cores
Ferrite cores - Dimensions - Part 8: E-cores
Specifies the dimensions that are of importance for mechanical interchangeability for E-cores with rectangular cross-section made of ferrite, the dimensions of coil formers to be used with them, and the effective parameter values to be used in associated calculations.
Ferritkerne - Maße - Teil 8: E-Kerne
Noyaux ferrites - Dimensions - Partie 8: Noyaux E
Feritna jedra – Mere – 8. del: E-jedra (IEC 62317-8:2006)
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
SIST EN 62317-8:2007
01-september-2007
1DGRPHãþD
SIST EN 62358:2005
Feritna jedra – Mere – 8. del: E-jedra (IEC 62317-8:2006)
Ferrite cores - Dimensions -- Part 8: E-cores (IEC 62317-8:2006)
Ferritkerne - Maße - Teil 8: E-Kerne (IEC 62317-8:2006)
Noyaux ferrites - Dimensions -- Partie 8: Noyaux E (IEC 62317-8:2006)
Ta slovenski standard je istoveten z: EN 62317-8:2006
ICS:
29.100.10 Magnetne komponente Magnetic components
SIST EN 62317-8:2007 en,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
EUROPEAN STANDARD
EN 62317-8
NORME EUROPÉENNE
November 2006
EUROPÄISCHE NORM
ICS 29.100.10 Partly supersedes EN 62358:2004
English version
Ferrite cores -
Dimensions
Part 8: E-cores
(IEC 62317-8:2006)
Noyaux ferrites - Ferritkerne -
Dimensions Maße
Partie 8: Noyaux E Teil 8: E-Kerne
(CEI 62317-8:2006) (IEC 62317-8:2006)
This European Standard was approved by CENELEC on 2006-10-01. CENELEC members are bound to comply
with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard
the status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on
application to the Central Secretariat or to any CENELEC member.
This European Standard exists in two official versions (English and German). A version in any other language
made by translation under the responsibility of a CENELEC member into its own language and notified to the
Central Secretariat has the same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Cyprus, the Czech
Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain,
Sweden, Switzerland and the United Kingdom.
CENELEC
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
Central Secretariat: rue de Stassart 35, B - 1050 Brussels
© 2006 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members.
Ref. No. EN 62317-8:2006 E
---------------------- Page: 2 ----------------------
EN 62317-8:2006 - 2 -
Foreword
The text of document 51/864/FDIS, future edition 1 of IEC 62317-8, prepared by IEC TC 51, Magnetic
components and ferrite materials, was submitted to the IEC-CENELEC parallel vote and was approved by
CENELEC as EN 62317-8 on 2006-10-01.
This standard replaces Table A.1 and Table B.1 of EN 62358:2004. New rectangular centre leg E-cores,
which have been developed in the industry, were introduced in EN 62358, and are in widespread use.
This standard has been revised to specify dimensions and effective parameters for these newer
rectangular centre leg E-cores.
The following dates were fixed:
– latest date by which the EN has to be implemented
at national level by publication of an identical
national standard or by endorsement (dop) 2007-07-01
– latest date by which the national standards conflicting
with the EN have to be withdrawn (dow) 2009-10-01
Annex ZA has been added by CENELEC.
__________
Endorsement notice
The text of the International Standard IEC 62317-8:2006 was approved by CENELEC as a European
Standard without any modification.
__________
---------------------- Page: 3 ----------------------
- 3 - EN 62317-8:2006
Annex ZA
(normative)
Normative references to international publications
with their corresponding European publications
The following referenced documents are indispensable for the application of this document. For dated
references, only the edition cited applies. For undated references, the latest edition of the referenced
document (including any amendments) applies.
NOTE When an international publication has been modified by common modifications, indicated by (mod), the relevant EN/HD
applies.
Publication Year Title EN/HD Year
IEC 60205 2006 Calculation of the effective parameters of EN 60205 2006
magnetic piece parts
---------------------- Page: 4 ----------------------
INTERNATIONAL IEC
STANDARD 62317-8
First edition
2006-08
Ferrite cores – Dimensions –
Part 8:
E-cores
IEC 2006 Copyright - all rights reserved
No part of this publication may be reproduced or utilized in any form or by any means, electronic or
mechanical, including photocopying and microfilm, without permission in writing from the publisher.
International Electrotechnical Commission, 3, rue de Varembé, PO Box 131, CH-1211 Geneva 20, Switzerland
Telephone: +41 22 919 02 11 Telefax: +41 22 919 03 00 E-mail
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.