iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
CLC

EN 60068-2-55:2013

(Main)

Environmental testing - Part 2-55: Tests - Test Ee and guidance - Loose cargo testing including bounce

Environmental testing - Part 2-55: Tests - Test Ee and guidance - Loose cargo testing including bounce

IEC 60068-2-55:2013 provides a standard procedure for determining the ability of a specimen to withstand specified severities of bounce, e. g. when transported as loose cargo on wheeled vehicles. This second edition cancels and replaces the first edition, published in 1987, and constitutes a technical revision. The main changes with respect to the previous edition are listed below: This new edition allows for loose cargo testing in a more general sense. The test is no longer aligned with a special testing machine but allows for use of any suitable equipment such as electrodynamic or servo-hydraulic shaker tables. Moreover, sinusoidal and random vibration can be used. The previous rotation table motions are included in Annex A as historical methods.

Umgebungseinflüsse - Teil 2-55: Prüfverfahren - Prüfung Ee und Leitfaden: Prüfung loser Packstücke einschließlich Prellen

Essais d’environnement - Partie 2-55: Essais - Essai Ee et guide - Essais de chargement sans arrimage y compris l’essai de rebondissement

La CEI 60068-2-55:2013 fournit une procédure normalisée permettant de déterminer l'aptitude d'un spécimen à résister à des sévérités spécifiées de rebondissement, lorsqu'il est transporté par exemple sans arrimage sur des véhicules à roues. Cette deuxième édition annule et remplace la première édition, publiée en 1987. Elle constitue une révision technique. Les modifications principales par rapport à l'édition précédente sont les suivantes: Cette nouvelle édition prévoit des essais de chargement sans arrimage dans un sens plus général. L'essai n'est plus conduit à l'aide d'un appareil spécial d'essai mais permet d'utiliser tout matériel approprié tel que les tables vibrantes électrodynamiques ou servo-hydrauliques. De plus, les vibrations sinusoïdales et aléatoires peuvent être utilisées. Les mouvements antérieurs de la table de rotation sont inclus dans l'Annexe A à titre de méthodes historiques.

Okoljsko preskušanje - 2-55. del: Preskusi - Preskus Ee in navodilo: Preskušanje nepritrjenega tovora, vključno s premetavanjem

Ta del IEC 60068 ponuja standardni postopek za določanje sposobnosti vzorca za vzdržljivost določenih stopenj premetavanja, npr. pri prevažanju kot neprivezan tovor na vozilih s kolesi. Ta test je zlasti namenjen vzorcem, pripravljenim za prevoz, vključno z vzorci v transportnem ohišju, pri čemer se slednji obravnava kot del samega vzorca ali embalaže. Ta test se ne sme uporabljati kot test nizkofrekvenčnih vibracij. Čeprav je primarno namenjen elektrotehničnim izdelkom, ta standard ni omejen nanje in se lahko poljubno uporablja na drugih področjih.

General Information

Status
Published
Publication Date
02-May-2013
Withdrawal Date
12-Mar-2016
ICS
19.040 - Environmental testing
29.020 - Electrical engineering in general
Technical Committee
CLC/SR 104 - Environmental conditions, classification and methods of test
Drafting Committee
IEC/TC 104 - IEC_TC_104
Current Stage
6060 - Document made available - Publishing
Start Date
03-May-2013
Completion Date
03-May-2013
Ref Project
SIST EN 60068-2-55:2013 - Environmental testing - Part 2-55: Tests - Test Ee and guidance: Loose cargo testing including Bounce

Relations

Replaces
EN 60068-2-55:1993 - Basic environmental testing procedures - Part 2-55: Tests - Test Ee and guidance: Bounce
Effective Date
29-Jan-2023

Buy Standard

EN 60068-2-55:2013EN 60068-2-55:2013
PreviousNext
Standard
EN 60068-2-55:2013
English language
21 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN 60068-2-55:2013
01-julij-2013
2NROMVNRSUHVNXãDQMHGHO3UHVNXVL3UHVNXV(HLQQDYRGLOR3UHVNXãDQMH
QHSULWUMHQHJDWRYRUDYNOMXþQRVSUHPHWDYDQMHP
Environmental testing - Part 2-55: Tests - Test Ee and guidance: Loose cargo testing
including Bounce
Umgebungseinflüsse - Teil 2-55: Prüfverfahren - Prüfung Ee und Leitfaden: Prüfung
loser Packstücke einschließlich Prellen
Ta slovenski standard je istoveten z: EN 60068-2-55:2013
ICS:
19.040 Preskušanje v zvezi z Environmental testing
okoljem
SIST EN 60068-2-55:2013 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN 60068-2-55:2013

---------------------- Page: 2 ----------------------

SIST EN 60068-2-55:2013

EUROPEAN STANDARD
EN 60068-2-55

NORME EUROPÉENNE
May 2013
EUROPÄISCHE NORM

ICS 19.040; 29.020 Supersedes EN 60068-2-55:1993


English version


Environmental testing -
Part 2-55: Tests -
Test Ee and guidance -
Loose cargo testing including bounce
(IEC 60068-2-55:2013)


Essais d’environnement -  Umgebungseinflüsse -
Partie 2-55: Essais - Teil 2-55: Prüfverfahren -
Essai Ee et guide - Prüfung Ee und Leitfaden: Prüfung loser
Essais de chargement sans arrimage y Packstücke einschließlich Prellen
compris l’essai de rebondissement (IEC 60068-2-55:2013)
(CEI 60068-2-55:2013)





This European Standard was approved by CENELEC on 2013-03-13. CENELEC members are bound to comply
with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard
the status of a national standard without any alteration.

Up-to-date lists and bibliographical references concerning such national standards may be obtained on
application to the CEN-CENELEC Management Centre or to any CENELEC member.

This European Standard exists in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CENELEC member into its own language and notified
to the CEN-CENELEC Management Centre has the same status as the official versions.

CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus,
the Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany,
Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland,
Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom.

CENELEC
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung

Management Centre: Avenue Marnix 17, B - 1000 Brussels


© 2013 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members.
Ref. No. EN 60068-2-55:2013 E

---------------------- Page: 3 ----------------------

SIST EN 60068-2-55:2013
EN 60068-2-55:2013 - 2 -

Foreword
The text of document 104/592/FDIS, future edition 2 of IEC 60068-2-55, prepared by IEC TC 104
"Environmental conditions, classification and methods of test" was submitted to the IEC-CENELEC
parallel vote and approved by CENELEC as EN 60068-2-55:2013.
The following dates are fixed:
• latest date by which the document has (dop) 2013-12-13
to be implemented at national level by
publication of an identical national
standard or by endorsement
(dow) 2016-03-13
• latest date by which the national
standards conflicting with the

document have to be withdrawn

This document supersedes EN 60068-2-55:1993.
EN 60068-2-55:2013 includes the following significant technical changes with respect to EN 60068-2-
55:1993:
This new edition allows for loose cargo testing in a more general sense. The test is no longer aligned with
a special testing machine but allows for use of any suitable equipment such as electrodynamic or servo-
hydraulic shaker tables. Moreover, sinusoidal and random vibration can be used. The previous rotation
table motions are included in Annex A as historical methods.
This standard should be used in conjunction with EN 60068-1.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CENELEC [and/or CEN] shall not be held responsible for identifying any or all such patent
rights.

Endorsement notice
The text of the International Standard IEC 60068-2-55:2013 was approved by CENELEC as a European
Standard without any modification.
In the official version, for Bibliography, the following notes have to be added for the standards indicated:
IEC 60068-2-27 NOTE  Harmonized as EN 60068-2-27.
IEC 60068-2-31 NOTE  Harmonized as EN 60068-2-31.
IEC 60068-5-2 NOTE  Harmonized as EN 60068-5-2.
ISO/IEC 17025 NOTE  Harmonized as EN ISO/IE
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

CLC
EN IEC 60068-3-4:2023(Main)
Environmental testing - Part 3-4: Supporting documentation and guidance - Damp heat tests
SIST EN IEC 60068-3-4:2024

IEC 60068-3-4:2023 is available as IEC 60068-3-4:2023 RLV which contains the International Standard and its Redline version, showing all changes of the technical content compared to the previous edition.IEC 60068-3-4:2023 provides the necessary information and the basic principles of the effect of humidity in the context of environmental testing to assist in preparing relevant specifications, such as standards for components or equipment. Furthermore, information is provided on operating climatic test chambers. This second edition cancels and replaces the first edition published in 2001. This edition constitutes a technical revision. This edition includes the following significant technical changes with respect to the previous edition: a) the requirements for distilled and deionized water have been revised; b) recommendations for the cleaning procedure of test chambers have been included; c) humidification systems (ultrasonic humidifiers and atomizers) have been added; d) the description of water penetration mechanisms has been refined.

  • Standard
    19 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN IEC 60068-3-7:2020(Main)
Environmental testing - Part 3-7: Supporting documentation and guidance - Measurements in temperature chambers for tests A (Cold) and B (Dry heat) (with load)
SIST EN IEC 60068-3-7:2020

IEC 60068-3-7:2020 is available as IEC 60068-3-7:2020 RLV which contains the International Standard and its Redline version, showing all changes of the technical content compared to the previous edition.IEC 60068-3-7:2020 specifies a uniform and reproducible method of confirming that temperature test chambers conform to the requirements specified in the climatic test procedures of IEC 60068-2-1 and IEC 60068-2-2, when loaded with either heat-dissipating or non heat-dissipating specimens under conditions which take into account air circulation inside the working space of the chamber. This document is intended primarily for users when conducting regular chamber performance monitoring. This second edition cancels and replaces the first edition published in 2001. This edition constitutes a technical revision. This edition includes the following significant technical changes with respect to the previous edition: - verbal forms have, in many parts, been changed to express requirements instead of recommendations ('shall' instead of 'should'); - Table 1 has been updated.

  • Standard
    15 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN IEC 60068-3-5:2018(Main)
Environmental testing - Part 3-5: Supporting documentation and guidance - Confirmation of the performance of temperature chambers
SIST EN IEC 60068-3-5:2018

NEW!IEC 60068-3-5:2018 is available as IEC 60068-3-5:2018 RLV which contains the International Standard and its Redline version, showing all changes of the technical content compared to the previous edition.IEC 60068-3-5:2018 provides a uniform and reproducible method of confirming that temperature test chambers, without specimens, conform to the requirements specified in climatic test procedures of IEC 60068-2 (all parts) and other standards. This document is intended for users when conducting regular chamber performance monitoring. This second edition cancels and replaces the first edition published in 2001. This edition constitutes a technical revision. This edition includes the following significant technical changes with respect to the previous edition: - Confirmation procedures are clarified.

  • Standard
    19 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN IEC 60068-3-6:2018(Main)
Environmental testing - Part 3-6: Supporting documentation and guidance - Confirmation of the performance of temperature/humidity chambers
SIST EN IEC 60068-3-6:2018

NEW!IEC 60068-3-6:2018 is available as IEC 60068-3-6:2018 RLV which contains the International Standard and its Redline version, showing all changes of the technical content compared to the previous edition.IEC 60068-3-6:2018 provides a uniform and reproducible method of confirming that temperature and humidity test chambers, without specimens, conform to the requirements specified in climatic test procedures of IEC 60068-2 (all parts). This document is intended for users when conducting regular chamber performance monitoring. This second edition cancels and replaces the first edition published in 2001. This edition constitutes a technical revision. This edition includes the following significant technical changes with respect to the previous edition: - Confirmation procedures are clarified.

  • Standard
    20 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN 60068-2-78:2013(Main)
Environmental testing - Part 2-78: Tests - Test Cab: Damp heat, steady state
SIST EN 60068-2-78:2013

NEW! IEC 60068-2-78:2012 is available as IEC Standards+ 60068-2-78:2012 which contains the International Standard and its Redline version, showing all changes of the technical content compared to the previous edition. IEC 60068-2-78:2012 establishes a test method for determining the ability of components or equipment to withstand transportation, storage and use under conditions of high humidity. The object of this standard is to investigate the effect of high humidity at constant temperature without condensation on a specimen over a prescribed period. It is applicable to small equipment or components as well as large equipment, and can be applied to both heat-dissipating and non-heat-dissipating specimens. This second edition cancels and replaced the first edition, published in 2001 and constitutes a technical revision. This edition includes editorial and format changes with respect to the previous edition: - The test chamber from IEC 60068-3-6 has been introduced.

  • Standard
    12 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN 60068-2-65:2013(Main)
Environmental testing - Part 2-65: Tests - Test Fg: Vibration - Acoustically induced method
SIST EN 60068-2-65:2013

IEC 60068-2-65:2013 provides standard procedures and guidance for conducting acoustic tests in order to determine the ability of a specimen to withstand vibration caused by a specified sound-pressure level environment to which it is, or is liable to be, subjected. This second edition cancels and replaces the second edition, published in 1993, and constitutes a technical revision. This edition includes the following significant technical changes with respect to the previous edition: - minor technical and editorial changes were made throughout the document as originally requested by the DE National Committee; - following comments at the CD stage, particularly from the UK National Committee, significant technical and editorial additions were made to the standard for acoustic testing employing the progressive wave tube technique.

  • Standard
    33 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN 60068-2-80:2005(Main)
Environmental testing - Part 2-80: Tests - Test Fi: Vibration - Mixed mode
SIST EN 60068-2-80:2005

Intended for general application for testing specimens when simulation is required of vibration excitation of a complex and mixed nature. The purpose of the test is to demonstrate the adequacy of the specimen to resist the specified mixed mode excitation without unacceptable degradation of its functional and/or structural performance. It is particularly useful for tailoring mixed mode environments where measured data are available for the real life environment. The test also helps reveal the accumulated effects of stress induced by random vibration, mixed with sine and/or random, and the resulting mechanical weakness and degradation in specified performances, and to use this information, in conjunction with the relevant specification, to assess the acceptability of specimens. In some cases, this standard may also be used to demonstrate the mechanical robustness of specimens. This standard is applicable to specimens which may be subjected to vibration of a random and/or a combination of random and deterministic nature resulting from transportation or real life environments, for example in aircraft, space vehicles and for items in their transportation container when the latter may be considered as part of the specimen itself. Although primarily intended for electrotechnical specimens, this standard is not restricted to such specimens and may be used in other fields where desired.

  • Standard
    45 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN 60068-3-8:2003(Main)
Environmental testing - Part 3-8: Supporting documentation and guidance - Selecting amongst vibration tests
SIST EN 60068-3-8:2004

Provides guidance for selecting amongst the EN 60068-2 stationary vibration test methods Fc sinusoidal, Fh random and F(x) Mixed mode vibration. The different steady-state test methods and their aims are briefly described in Clause 4. Transient test methods are not included. For vibration testing, the environmental conditions, especially the dynamic conditions for the specimen, should be known. This standard helps to collect information about the environmental conditions (Clause 5), to estimate or measure the dynamic conditions (Clause 6) and gives examples to enable decisions to be made on the most applicable environmental vibration test method. Starting from the condition, the method of selecting the appropriate test is given. Since real life vibration conditions are dominated by vibration of a random nature, random testing should be the commonly used method, see Table 1, Clause 7. The methods included hereafter may be used to examine the vibration response of a specimen under test before, during and after vibration testing. The selection for the appropriate excitation method is described in Clause 8 and tabulated in Table 2. In this standard specification, writers will find information concerning vibration test methods and guidance for their selection. For guidance on test parameters, or severities of one of the test methods, reference should be made to the normative references. Has the status of a basic safety publication in accordance with IEC Guide 104.

  • Standard
    26 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN 60068-3-4:2002(Main)
Environmental testing - Part 3-4: Supporting documentation and guidance - Damp heat tests
SIST EN 60068-3-4:2002

Provides the necessary information to assist in preparing relevant specifications, such as standards for components or equipment, in order to select appropriate tests and test severities for specific products and, in some cases, specific types of application. The object of damp heat tests is to determine the ability of products to withstand the stresses occurring in a high relative humidity environment, with or without condensation, and with special regard to variations of electrical and mechanical characteristics. Damp heat tests may also be utilized to check the resistance of a specimen to some forms of corrosion attack.

  • Standard
    18 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN IEC 60068-3-4:2023(Main)
Environmental testing - Part 3-4: Supporting documentation and guidance - Damp heat tests
SIST EN IEC 60068-3-4:2024

IEC 60068-3-4:2023 is available as IEC 60068-3-4:2023 RLV which contains the International Standard and its Redline version, showing all changes of the technical content compared to the previous edition.IEC 60068-3-4:2023 provides the necessary information and the basic principles of the effect of humidity in the context of environmental testing to assist in preparing relevant specifications, such as standards for components or equipment. Furthermore, information is provided on operating climatic test chambers. This second edition cancels and replaces the first edition published in 2001. This edition constitutes a technical revision. This edition includes the following significant technical changes with respect to the previous edition: a) the requirements for distilled and deionized water have been revised; b) recommendations for the cleaning procedure of test chambers have been included; c) humidification systems (ultrasonic humidifiers and atomizers) have been added; d) the description of water penetration mechanisms has been refined.

  • Standard
    19 pages
    English language
    sale 10% off
    e-Library read for
    1 day