IEC 61191-2:2017/COR1:2019
(Corrigendum)Corrigendum 1 - Printed board assemblies - Part 2: Sectional specification - Requirements for surface mount soldered assemblies
Corrigendum 1 - Printed board assemblies - Part 2: Sectional specification - Requirements for surface mount soldered assemblies
General Information
Relations
Standards Content (Sample)
IEC 2019
INTERNATIONAL ELECTROTECHNICAL COMMISSION
____________
IEC 61191-2
Edition 3.0 2017-05
PRINTED BOARD ASSEMBLIES –
Part 2: Sectional specification –
Requirements for surface mount s
...
This May Also Interest You
IEC 61191-1:2018 is also available as IEC 61191-1:2018 RLV which contains the International Standard and its Redline version, showing all changes of the technical content compared to the previous edition.
IEC 61191-1:2018 prescribes requirements for materials, methods and verification criteria for producing quality soldered interconnections and assemblies using surface mount and related assembly technologies. This part of IEC 61191 also includes recommendations for good manufacturing processes. This edition includes the following significant technical changes with respect to the previous edition:
- the requirements have been updated to be compliant with the acceptance criteria in IPC‑A-610F;
- the term "assembly drawing" has been changed to "assembly documentation" throughout;
- references to IEC standards have been corrected;
- Clause 9 was completely rewritten;
- Annex B was removed because there are already procedures for circuit board assemblies.
- Standard140 pagesEnglish languagesale 15% off
- Standard89 pagesEnglish and French languagesale 15% off
IEC 61191-2:2017 gives the requirements for surface mount solder connections. The requirements pertain to those assemblies that are totally surface mounted or to the surface mounted portions of those assemblies that include other related technologies (e.g. through-hole, chip mounting, terminal mounting, etc.).
This edition includes the following significant technical changes with respect to the previous edition:
a) the requirements have been updated to be compliant with the acceptance criteria in IPC‑A-610F;
b) some of the terminology used in the document has been updated;
c) references to IEC standards have been corrected;
d) five termination styles have been added.
The contents of the corrigendum of September 2019 have been included in this copy.
- Standard33 pagesEnglish languagesale 15% off
- Standard66 pagesEnglish and French languagesale 15% off
IEC 62739-3:2017 describes the selection methodology of an appropriate evaluating test method for the erosion of the metal materials without or with surface processing intended to be used for lead-free wave soldering equipment as a solder bath and other components which are in contact with the molten solder.
- Standard32 pagesEnglish languagesale 15% off
- Standard63 pagesEnglish and French languagesale 15% off
IEC 62739-2:2016 provides an evaluating test method for the erosion of the metallic materials with surface processing intended to be used for lead-free wave soldering equipment as a solder bath and other components which are in contact with the molten solder. It aims at prevention of an accident or a fire by predicting a setup and life of a suitable maintenance cycle.
- Standard32 pagesEnglish and French languagesale 15% off
IEC 62739-1:2013 provides an evaluating test method for the erosion of the metallic materials without surface processing intended to be used for lead-free wave soldering equipment as a solder bath and other components which are in contact with the molten solder.
- Standard36 pagesEnglish and French languagesale 15% off
IEC 61191-2:2013 gives the requirements for surface mount solder connections. The requirements pertain to those assemblies that are totally surface mounted or to the surface mounted portions of those assemblies that include other related technologies (e.g. through-hole, chip mounting, terminal mounting, etc.). This edition includes the following significant technical changes with respect to the previous edition:
- IPC-A-610 on workmanship has been included as a normative reference;
- some of the terminology used in the document has been updated;
- references to IEC standards have been corrected;
- the use of lead-free solder paste and plating are addressed.
- Standard53 pagesEnglish and French languagesale 15% off
IEC 61191-1:2013 prescribes requirements for materials, methods and verification criteria for producing quality soldered interconnections and assemblies using surface mount and related assembly technologies. It also includes recommendations for good manufacturing processes. This edition includes the following significant technical changes with respect to the previous edition:
- reference standard IEC 61192-1 has been replaced by IPC-A-610;
- some of the terminology has been updated;
- references to IEC standards have been corrected;
- the use of lead-free alloys in the assembly have been added.
- Standard96 pagesEnglish and French languagesale 15% off
IEC 61191-1:2018 is also available as IEC 61191-1:2018 RLV which contains the International Standard and its Redline version, showing all changes of the technical content compared to the previous edition.
IEC 61191-1:2018 prescribes requirements for materials, methods and verification criteria for producing quality soldered interconnections and assemblies using surface mount and related assembly technologies. This part of IEC 61191 also includes recommendations for good manufacturing processes. This edition includes the following significant technical changes with respect to the previous edition:
- the requirements have been updated to be compliant with the acceptance criteria in IPC‑A-610F;
- the term "assembly drawing" has been changed to "assembly documentation" throughout;
- references to IEC standards have been corrected;
- Clause 9 was completely rewritten;
- Annex B was removed because there are already procedures for circuit board assemblies.
- Standard140 pagesEnglish languagesale 15% off
- Standard89 pagesEnglish and French languagesale 15% off
IEC 61191-2:2017 gives the requirements for surface mount solder connections. The requirements pertain to those assemblies that are totally surface mounted or to the surface mounted portions of those assemblies that include other related technologies (e.g. through-hole, chip mounting, terminal mounting, etc.).
This edition includes the following significant technical changes with respect to the previous edition:
a) the requirements have been updated to be compliant with the acceptance criteria in IPC‑A-610F;
b) some of the terminology used in the document has been updated;
c) references to IEC standards have been corrected;
d) five termination styles have been added.
The contents of the corrigendum of September 2019 have been included in this copy.
- Standard33 pagesEnglish languagesale 15% off
- Standard66 pagesEnglish and French languagesale 15% off
IEC 62739-3:2017 describes the selection methodology of an appropriate evaluating test method for the erosion of the metal materials without or with surface processing intended to be used for lead-free wave soldering equipment as a solder bath and other components which are in contact with the molten solder.
- Standard32 pagesEnglish languagesale 15% off
- Standard63 pagesEnglish and French languagesale 15% off
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.