Amendment 1 - Safety of household and similar electrical appliances - Part 2-41: Particular requirements for pumps for liquids having a temperature not exceeding 35 °C

General Information

Status
Published
Publication Date
27-Feb-2000
Current Stage
DELPUB - Deleted Publication
Completion Date
29-Oct-2002
Ref Project

Relations

Buy Standard

Standard
IEC 60335-2-41:1996/AMD1:2000 - Amendment 1 - Safety of household and similar electrical appliances - Part 2-41: Particular requirements for pumps for liquids having a temperature not exceeding 35 °C Released:2/29/2000 Isbn:2831851483
English language
3 pages
sale 15% off
Preview
sale 15% off
Preview

Standards Content (Sample)


INTERNATIONAL IEC
STANDARD
60335-2-41
AMENDMENT 1
2000-02
Amendment 1
Safety of household and similar
electrical appliances –
Part 2-41:
Particular requirements for pumps for
liquids having a temperature not exceeding 35 °C
Amendement 1
Sécurité des appareils électrodomestiques et analogues –
Partie 2-41:
Règles particulières pour les pompes pour liquides
dont la température ne dépasse pas 35 °C

 IEC 2000  Copyright - all rights reserved
International Electrotechnical Commission 3, rue de Varembé Geneva, Switzerland
Telefax: +41 22 919 0300 e-mail: inmail@iec.ch IEC web site http://www.iec.ch
Commission Electrotechnique Internationale
PRICE CODE
C
International Electrotechnical Commission
For price, see current catalogue

– 2 – 60335-2-41 Amend.1 © IEC:2000(E)

FOREWORD
This amendment has been prepared by IEC technical committee 61: Safety of household and

similar electrical appliances.

The text of this amendment is based on the following documents:

FDIS Report on voting
61/1752/FDIS 61/1777/RVD
Full information on the voting for the approval of this amendment can be found in the report on
voting indicated in the above table.
A bilingual version of this amendment may be issued at a later date.
––––––––––––
Title
Replace the title by:
Part 2: Particular requirements for pumps
Foreword
In the third paragraph after the table, replace the title of the standard by:
Safety requirements for electric pumps
1 Scope
In the first paragraph, replace "35 °C" by "90 °C".
4 General conditions for the tests

4.7 Replace the addition by:
The liquid temperature is maintained within +0, –5 K of the temperature marked on the .
pump
7 Marking and instructions
Add the following:
7.1
shall be marked with the maximum liquid temperature which shall not be less
Pumps
than 35 °C. If the temperature exceeds 35 °C, they shall be marked with the maximum period
of
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.