Household and similar electrical appliances - Safety - Part 2-95: Particular requirements for drives for vertically moving garage doors for residential use

IEC 60335-2-95:2019 is available as IEC 60335-2-95:2019 RLV which contains the International Standard and its Redline version, showing all changes of the technical content compared to the previous edition.
IEC 60335-2-95:2019 deals with the safety of electric drives for garage doors for residential use that open and close in a vertical direction, the rated voltage of the drives being not more than 250 V for single-phase appliances and 480 V for other appliances. It also covers the hazards associated with the movement of these electrically driven garage doors. The drive can be supplied with a garage door. This standard also applies to entrapment protection devices for use with drives. It does not cover hazards related to the mechanisms of the door itself. As far as is practicable, this standard deals with the common hazards presented by appliances that are encountered by all persons in and around the home. However, in general, it does not take into account playing with the appliance by young children, but recognizes that children may be in the vicinity of the garage door. Attention is drawn to the fact that in many countries additional requirements are specified by the national authorities responsible for the protection of labour and similar authorities.
This standard does not apply to drives
- for shutters, awnings, blinds and similar equipment (IEC 60335-2-97);
- for gates, doors and windows (IEC 60335-2-103);
- for commercial and industrial purposes;
- intended to be used in locations where special conditions prevail, such as the presence of a corrosive or explosive atmosphere (dust, vapour or gas).
This fourth edition cancels and replaces the third edition published in 2011, Amendment 1: 2015 and Amendment 2:2017. This edition constitutes a technical revision. This edition includes the following significant technical changes with respect to the previous edition:
a) the text has been aligned with edition 5.2 of Part 1;
b) reference to IEC 60335-2-97 and IEC 60335-2-103 has been revised to correctly state their titles (Clause 1);
c) specific instruction statements have been revised to separate them from information to be provided (7.12);
d) the compliance criteria for the tests of 19.11.2 and 19.11.3 has been modified (19.13);
e) the tests for class III appliances and parts of class III constructions have been modified (25.8, 25.15).
This part 2 is to be used in conjunction with the latest edition of IEC 60335-1 and its amendments. It was established on the basis of the fifth edition (2010) of that standard.

Appareils électrodomestiques et analogues - Sécurité - Partie 2-95: Exigences particulières pour les motorisations de portes de garage à ouverture verticale, pour usage résidentiel

IEC 60335-2-95:2019 est disponible sous forme de IEC 60335-2-95:2019 RLV qui contient la Norme internationale et sa version Redline, illustrant les modifications du contenu technique depuis l'édition précédente.
L'IEC 60335-2-95:2019 traite de la sécurité des motorisations électriques des portes de garage pour usage résidentiel, qui ouvrent et ferment la porte verticalement et dont la tension assignée n'est pas supérieure à 250 V pour les appareils monophasés et à 480 V pour les autres appareils. Elle couvre également les dangers liés au mouvement de ces portes de garage motorisées. La motorisation peut être livrée avec une porte de garage. La présente norme s'applique également aux dispositifs de protection contre l'écrasement à utiliser avec les motorisations. Elle ne couvre pas les dangers liés au mécanisme de la porte elle-même. Dans la mesure du possible, la présente norme traite des dangers ordinaires présentés par les appareils et encourus par tous les individus à l'intérieur et autour de l'habitation. Cependant, elle ne tient généralement pas compte de l’utilisation de l'appareil comme jouet par des jeunes enfants mais reconnaît que des enfants peuvent se trouver à proximité de la porte de garage. L'attention est attirée sur le fait que, dans de nombreux pays, des exigences supplémentaires sont spécifiées par les organismes nationaux responsables de la protection des travailleurs et par des organismes similaires. La présente norme ne s’applique pas aux motorisations
- de volets, stores, rideaux et équipements analogues (IEC 60335-2-97);
- motorisations de portails, portes et fenêtres (IEC 60335-2-103);
- pour usages commerciaux et industriels;
- destinées à être utilisées dans des locaux présentant des conditions particulières, telles que la présence d'une atmosphère corrosive ou explosive (poussière, vapeur ou gaz).
Cette quatrième édition annule et remplace la troisième édition parue en 2011, l'Amendement 1:2015 et l'Amendement 2:2017. Cette édition constitue une révision technique.
Cette édition inclut les modifications techniques majeures suivantes par rapport à l'édition précédente:
a) le texte a été aligné sur l’édition 5.2 de la Partie 1;
b) les titres des références IEC 60335-2-97 et IEC 60335-2-103 ont été revus et corrigés (Article 1);
c) des instructions spécifiques ont été revues afin de les séparer des informations à fournir (7.12);
d) les critères de conformité pour les essais de 19.11.2 et 19.11.3 ont été modifiés (19.13);
e) les essais relatifs aux appareils de la classe III et aux parties des constructions de la classe III ont été modifiés (25.8, 25.15).
La présente partie 2 doit être utilisée conjointement avec la dernière édition de l’IEC 60335 1 et ses amendements. Elle a été établie sur la base de la cinquième édition (2010) de cette norme.

General Information

Status
Published
Publication Date
04-Dec-2019
Current Stage
PPUB - Publication issued
Completion Date
05-Dec-2019
Ref Project

Buy Standard

Standard
IEC 60335-2-95:2019 - Household and similar electrical appliances - Safety - Part 2-95: Particular requirements for drives for vertically moving garage doors for residential use
English and French language
53 pages
sale 15% off
Preview
sale 15% off
Preview

Standards Content (sample)

IEC 60335-2-95
Edition 4.0 2019-12
INTERNATIONAL
STANDARD
NORME
INTERNATIONALE
colour
inside
Household and similar electrical appliances – Safety –
Part 2-95: Particular requirements for drives for vertically moving garage doors
for residential use
Appareils électrodomestiques et analogues – Sécurité –
Partie 2-95: Exigences particulières pour les motorisations de portes de garage
à ouverture verticale, pour usage résidentiel
IEC 60335-2-95:2019-12(en-fr)
---------------------- Page: 1 ----------------------
THIS PUBLICATION IS COPYRIGHT PROTECTED
Copyright © 2019 IEC, Geneva, Switzerland

All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form

or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from

either IEC or IEC's member National Committee in the country of the requester. If you have any questions about IEC

copyright or have an enquiry about obtaining additional rights to this publication, please contact the address below or

your local IEC member National Committee for further information.

Droits de reproduction réservés. Sauf indication contraire, aucune partie de cette publication ne peut être reproduite

ni utilisée sous quelque forme que ce soit et par aucun procédé, électronique ou mécanique, y compris la photocopie

et les microfilms, sans l'accord écrit de l'IEC ou du Comité national de l'IEC du pays du demandeur. Si vous avez des

questions sur le copyright de l'IEC ou si vous désirez obtenir des droits supplémentaires sur cette publication, utilisez

les coordonnées ci-après ou contactez le Comité national de l'IEC de votre pays de résidence.

IEC Central Office Tel.: +41 22 919 02 11
3, rue de Varembé info@iec.ch
CH-1211 Geneva 20 www.iec.ch
Switzerland
About the IEC

The International Electrotechnical Commission (IEC) is the leading global organization that prepares and publishes

International Standards for all electrical, electronic and related technologies.
About IEC publications

The technical content of IEC publications is kept under constant review by the IEC. Please make sure that you have the

latest edition, a corrigendum or an amendment might have been published.

IEC publications search - webstore.iec.ch/advsearchform Electropedia - www.electropedia.org

The advanced search enables to find IEC publications by a The world's leading online dictionary on electrotechnology,

variety of criteria (reference number, text, technical containing more than 22 000 terminological entries in English

committee,…). It also gives information on projects, replaced and French, with equivalent terms in 16 additional languages.

and withdrawn publications. Also known as the International Electrotechnical Vocabulary

(IEV) online.
IEC Just Published - webstore.iec.ch/justpublished

Stay up to date on all new IEC publications. Just Published IEC Glossary - std.iec.ch/glossary

details all new publications released. Available online and 67 000 electrotechnical terminology entries in English and

once a month by email. French extracted from the Terms and Definitions clause of

IEC publications issued since 2002. Some entries have been

IEC Customer Service Centre - webstore.iec.ch/csc collected from earlier publications of IEC TC 37, 77, 86 and

If you wish to give us your feedback on this publication or CISPR.
need further assistance, please contact the Customer Service
Centre: sales@iec.ch.
A propos de l'IEC

La Commission Electrotechnique Internationale (IEC) est la première organisation mondiale qui élabore et publie des

Normes internationales pour tout ce qui a trait à l'électricité, à l'électronique et aux technologies apparentées.

A propos des publications IEC

Le contenu technique des publications IEC est constamment revu. Veuillez vous assurer que vous possédez l’édition la

plus récente, un corrigendum ou amendement peut avoir été publié.
Recherche de publications IEC - Electropedia - www.electropedia.org

webstore.iec.ch/advsearchform Le premier dictionnaire d'électrotechnologie en ligne au

La recherche avancée permet de trouver des publications IEC monde, avec plus de 22 000 articles terminologiques en

en utilisant différents critères (numéro de référence, texte, anglais et en français, ainsi que les termes équivalents dans

comité d’études,…). Elle donne aussi des informations sur les 16 langues additionnelles. Egalement appelé Vocabulaire

projets et les publications remplacées ou retirées. Electrotechnique International (IEV) en ligne.

IEC Just Published - webstore.iec.ch/justpublished Glossaire IEC - std.iec.ch/glossary

Restez informé sur les nouvelles publications IEC. Just 67 000 entrées terminologiques électrotechniques, en anglais

Published détaille les nouvelles publications parues. et en français, extraites des articles Termes et Définitions des

Disponible en ligne et une fois par mois par email. publications IEC parues depuis 2002. Plus certaines entrées

antérieures extraites des publications des CE 37, 77, 86 et
Service Clients - webstore.iec.ch/csc CISPR de l'IEC.
Si vous désirez nous donner des commentaires sur cette
publication ou si vous avez des questions contactez-nous:
sales@iec.ch.
---------------------- Page: 2 ----------------------
IEC 60335-2-95
Edition 4.0 2019-12
INTERNATIONAL
STANDARD
NORME
INTERNATIONALE
colour
inside
Household and similar electrical appliances – Safety –
Part 2-95: Particular requirements for drives for vertically moving garage doors
for residential use
Appareils électrodomestiques et analogues – Sécurité –
Partie 2-95: Exigences particulières pour les motorisations de portes de garage
à ouverture verticale, pour usage résidentiel
INTERNATIONAL
ELECTROTECHNICAL
COMMISSION
COMMISSION
ELECTROTECHNIQUE
INTERNATIONALE
ICS 13.120; 29.120.01; 91.090 ISBN 978-2-8322-7645-7

Warning! Make sure that you obtained this publication from an authorized distributor.

Attention! Veuillez vous assurer que vous avez obtenu cette publication via un distributeur agréé.

® Registered trademark of the International Electrotechnical Commission
Marque déposée de la Commission Electrotechnique Internationale
---------------------- Page: 3 ----------------------
– 2 – IEC 60335-2-95:2019 © IEC 2019
CONTENTS

FOREWORD ........................................................................................................................... 3

INTRODUCTION ..................................................................................................................... 6

1 Scope .............................................................................................................................. 7

2 Normative references ...................................................................................................... 7

3 Terms and definitions ...................................................................................................... 7

4 General requirement ........................................................................................................ 8

5 General conditions for the tests ....................................................................................... 8

6 Classification ................................................................................................................... 9

7 Marking and instructions .................................................................................................. 9

8 Protection against access to live parts ........................................................................... 11

9 Starting of motor-operated appliances ........................................................................... 11

10 Power input and current ................................................................................................. 11

11 Heating .......................................................................................................................... 12

12 Void ............................................................................................................................... 12

13 Leakage current and electric strength at operating temperature ..................................... 12

14 Transient overvoltages .................................................................................................. 12

15 Moisture resistance ....................................................................................................... 12

16 Leakage current and electric strength ............................................................................ 12

17 Overload protection of transformers and associated circuits .......................................... 13

18 Endurance ..................................................................................................................... 13

19 Abnormal operation ....................................................................................................... 13

20 Stability and mechanical hazards ................................................................................... 13

21 Mechanical strength ...................................................................................................... 18

22 Construction .................................................................................................................. 18

23 Internal wiring ................................................................................................................ 19

24 Components .................................................................................................................. 19

25 Supply connection and external flexible cords ............................................................... 20

26 Terminals for external conductors .................................................................................. 20

27 Provision for earthing .................................................................................................... 20

28 Screws and connections ................................................................................................ 20

29 Clearances, creepage distances and solid insulation ..................................................... 20

30 Resistance to heat and fire ............................................................................................ 20

31 Resistance to rusting ..................................................................................................... 20

32 Radiation, toxicity and similar hazards ........................................................................... 21

Annexes ............................................................................................................................... 24

Annex R (normative) Software evaluation ............................................................................ 25

Bibliography .......................................................................................................................... 26

Figure 101 – Examples of types of garage doors................................................................... 22

Figure 102 – Example of pictogram warning against child entrapment ................................... 23

---------------------- Page: 4 ----------------------
IEC 60335-2-95:2019 © IEC 2019 – 3 –
INTERNATIONAL ELECTROTECHNICAL COMMISSION
____________
HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES –
SAFETY –
Part 2-95: Particular requirements for drives for vertically
moving garage doors for residential use
FOREWORD

1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising

all national electrotechnical committees (IEC National Committees). The object of IEC is to promote

international co-operation on all questions concerning standardization in the electrical and electronic fields. To

this end and in addition to other activities, IEC publishes International Standards, Technical Specifications,

Technical Reports, Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC

Publication(s)”). Their preparation is entrusted to technical committees; any IEC National Committee interested

in the subject dealt with may participate in this preparatory work. International, governmental and non-

governmental organizations liaising with the IEC also participate in this preparation. IEC collaborates closely

with the International Organization for Standardization (ISO) in accordance with conditions determined by

agreement between the two organizations.

2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international

consensus of opinion on the relevant subjects since each technical committee has representation from all

interested IEC National Committees.

3) IEC Publications have the form of recommendations for international use and are accepted by IEC National

Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC

Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any

misinterpretation by any end user.

4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications

transparently to the maximum extent possible in their national and regional publications. Any divergence

between any IEC Publication and the corresponding national or regional publication shall be clearly indicated in

the latter.

5) IEC itself does not provide any attestation of conformity. Independent certification bodies provide conformity

assessment services and, in some areas, access to IEC marks of conformity. IEC is not responsible for any

services carried out by independent certification bodies.

6) All users should ensure that they have the latest edition of this publication.

7) No liability shall attach to IEC or its directors, employees, servants or agents including individual experts and

members of its technical committees and IEC National Committees for any personal injury, property damage or

other damage of any nature whatsoever, whether direct or indirect, or for costs (including legal fees) and

expenses arising out of the publication, use of, or reliance upon, this IEC Publication or any other IEC

Publications.

8) Attention is drawn to the Normative references cited in this publication. Use of the referenced publications is

indispensable for the correct application of this publication.

9) Attention is drawn to the possibility that some of the elements of this IEC Publication may be the subject of

patent rights. IEC shall not be held responsible for identifying any or all such patent rights.

International Standard IEC 60335-2-95 has been prepared by IEC technical committee 61:

Safety of household and similar electrical appliances.

This fourth edition cancels and replaces the third edition published in 2011, Amendment 1:

2015 and Amendment 2:2017. This edition constitutes a technical revision.

This edition includes the following significant technical changes with respect to the previous

edition:
a) the text has been aligned with edition 5.2 of Part 1;

b) reference to IEC 60335-2-97 and IEC 60335-2-103 has been revised to correctly state

their titles (Clause 1);
---------------------- Page: 5 ----------------------
– 4 – IEC 60335-2-95:2019 © IEC 2019

c) specific instruction statements have been revised to separate them from information to be

provided (7.12);

d) the compliance criteria for the tests of 19.11.2 and 19.11.3 has been modified (19.13);

e) the tests for class III appliances and parts of class III constructions have been modified

(25.8, 25.15).
The text of this International Standard is based on the following documents:
FDIS Report on voting
61/5937/FDIS 61/5946/RVD

Full information on the voting for the approval of this International Standard can be found in

the report on voting indicated in the above table.

This publication has been drafted in accordance with the ISO/IEC Directives, Part 2.

A list of all parts of the IEC 60335 series, under the general title: Household and similar

electrical appliances – Safety, can be found on the IEC website.

This part 2 is to be used in conjunction with the latest edition of IEC 60335-1 and its

amendments. It was established on the basis of the fifth edition (2010) of that standard.

NOTE 1 When “Part 1” is mentioned in this standard, it refers to IEC 60335-1.

This part 2 supplements or modifies the corresponding clauses in IEC 60335-1, so as to

convert that publication into the IEC standard: Safety requirements for drives for vertically

moving garage doors for residential use.

When a particular subclause of Part 1 is not mentioned in this part 2, that subclause applies

as far as is reasonable. When this standard states “addition”, “modification” or “replacement”,

the relevant text in Part 1 is to be adapted accordingly.
NOTE 2 The following numbering system is used:

– subclauses, tables and figures that are numbered starting from 101 are additional to those in Part 1;

– unless notes are in a new subclause or involve notes in Part 1, they are numbered starting from 101, including

those in a replaced clause or subclause;
– additional annexes are lettered AA, BB, etc.
NOTE 3 The following print types are used:
– requirements: in roman type;
– test specifications: in italic type;
– notes: in small roman type.

Words in bold in the text are defined in Clause 3. When a definition concerns an adjective, the adjective and the

associated noun are also in bold.

The committee has decided that the contents of the base publication and its amendments will

remain unchanged until the stability date indicated on the IEC web site under

"http://webstore.iec.ch" in the data related to the specific publication. At this date, the

publication will be
• reconfirmed,
• withdrawn,
• replaced by a revised edition, or
• amended.
---------------------- Page: 6 ----------------------
IEC 60335-2-95:2019 © IEC 2019 – 5 –

NOTE 4 The attention of National Committees is drawn to the fact that equipment manufacturers and testing

organizations may need a transitional period following publication of a new, amended or revised IEC publication in

which to make products in accordance with the new requirements and to equip themselves for conducting new or

revised tests.

It is the recommendation of the committee that the content of this publication be adopted for implementation

nationally not earlier than 12 months or later than 36 months from the date of publication.

The following differences exist in the countries indicated below.
– 6.1: Class 0I appliances are allowed (Japan).
– 7.1: Additional markings are required (USA).
– 7.12.1: Additional warnings and instructions are required (USA).
– 11.7: The test conditions are different (USA).
– 19.9: A running overload test is carried out (USA).
– 20.101: The test is not carried out (USA).

IMPORTANT – The 'colour inside' logo on the cover page of this publication indicates

that it contains colours which are considered to be useful for the correct

understanding of its contents. Users should therefore print this document using a

colour printer.
---------------------- Page: 7 ----------------------
– 6 – IEC 60335-2-95:2019 © IEC 2019
INTRODUCTION

It has been assumed in the drafting of this International Standard that the execution of its

provisions is entrusted to appropriately qualified and experienced persons.

This standard recognizes the internationally accepted level of protection against hazards such

as electrical, mechanical, thermal, fire and radiation of appliances when operated as in

normal use taking into account the manufacturer's instructions. It also covers abnormal

situations that can be expected in practice and takes into account the way in which

electromagnetic phenomena can affect the safe operation of appliances.

This standard takes into account the requirements of IEC 60364 as far as possible so that

there is compatibility with the wiring rules when the appliance is connected to the supply

mains. However, national wiring rules may differ.

If an appliance within the scope of this standard also incorporates functions that are covered

by another part 2 of IEC 60335, the relevant part 2 is applied to each function separately, as

far as is reasonable. If applicable, the influence of one function on the other is taken into

account.

When a part 2 standard does not include additional requirements to cover hazards dealt with

in Part 1, Part 1 applies.

NOTE 1 This means that the technical committees responsible for the part 2 standards have determined that it is

not necessary to specify particular requirements for the appliance in question over and above the general

requirements.

This standard is a product family standard dealing with the safety of appliances and takes

precedence over horizontal and generic standards covering the same subject.

NOTE 2 Horizontal and generic standards covering a hazard are not applicable since they have been taken into

consideration when developing the general and particular requirements for the IEC 60335 series of standards. For

example, in the case of temperature requirements for surfaces on many appliances, generic standards, such as

ISO 13732-1 for hot surfaces, are not applicable in addition to Part 1 or part 2 standards.

An appliance that complies with the text of this standard will not necessarily be considered to

comply with the safety principles of the standard if, when examined and tested, it is found to

have other features that impair the level of safety covered by these requirements.

An appliance employing materials or having forms of construction differing from those detailed

in the requirements of this standard may be examined and tested according to the intent of

the requirements and, if found to be substantially equivalent, may be considered to comply

with the standard.
---------------------- Page: 8 ----------------------
IEC 60335-2-95:2019 © IEC 2019 – 7 –
HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES –
SAFETY –
Part 2-95: Particular requirements for drives for vertically
moving garage doors for residential use
1 Scope
This clause of Part 1 is replaced by the following.

This part of IEC 60335 deals with the safety of electric drives for garage doors for residential

use that open and close in a vertical direction, the rated voltage of the drives being not more

than 250 V for single-phase appliances and 480 V for other appliances. It also covers the

hazards associated with the movement of these electrically driven garage doors.
NOTE 101 Examples of garage doors are shown in Figure 101.
NOTE 102 The drive can be supplied with a garage door.

NOTE 103 This standard also applies to entrapment protection devices for use with drives. It does not cover

hazards related to the mechanisms of the door itself.

As far as is practicable, this standard deals with the common hazards presented by

appliances that are encountered by all persons in and around the home. However, in general,

it does not take into account playing with the appliance by young children, but recognizes that

children may be in the vicinity of the garage door.

NOTE 104 Attention is drawn to the fact that in many countries additional requirements are specified by the

national authorities responsible for the protection of labour and similar authorities.

NOTE 105 This standard does not apply to drives
– for shutters, awnings, blinds and similar equipment (IEC 60335-2-97);
– for gates, doors and windows (IEC 60335-2-103);
– for commercial and industrial purposes;

– intended to be used in locations where special conditions prevail, such as the presence of a corrosive or

explosive atmosphere (dust, vapour or gas).
2 Normative references
This clause of Part 1 is applicable except as follows.
Addition:

IEC 60068-2-52:2017, Environmental testing – Part 2-52: Tests – Test Kb: Salt mist, cyclic

(sodium chloride solution)
3 Terms and definitions
This clause of Part 1 is applicable except as follows.
---------------------- Page: 9 ----------------------
– 8 – IEC 60335-2-95:2019 © IEC 2019
3.1 Definitions relating to physical characteristics
3.1.9 Replacement:
normal operation
operation of the drive under the following conditions:
Drives supplied without a door are operated with their rated load.

Drives supplied with a door are operated with the door installed in accordance with the

instructions.
3.1.101
rated load
force or torque assigned to the drive by the manufacturer
3.5 Definitions relating to types of appliances
3.5.101
drive
motor and other components that control the movement of the door

Note 1 to entry: Examples of components are gears, controls, brakes and entrapment protection systems.

3.5.102
automatic drive

drive that operates the door in at least one direction without intentional activation by the user

3.7 Definitions relating to safety components
3.7.101
biased-off switch

switch that automatically returns to the off position when its actuating member is released

3.7.102
entrapment protection system

part of the drive that protects against trapping which could result in the human body being

squeezed or crushed by the door

Note 1 to entry: Trapping in the garage is covered by the manual release of 20.109.

Note 2 to entry: An entrapment protection system may be incorporated in the motor assembly or may be

installed separately. It may consist of one or more devices, such as pressure sensitive edges, passive infrared,

active light sensing devices or a biased-off switch.
4 General requirement
This clause of Part 1 is applicable.
5 General conditions for the tests
This clause of Part 1 is applicable except as follows.
5.2 Addition:

When a test has to be carried out with a door, the door specified for installation with the drive

that gives the most unfavourable conditions for the test is used. An artificial load may be used

to simulate the door for some of the tests. The drive is adjusted in accordance with the

instructions.
---------------------- Page: 10 ----------------------
IEC 60335-2-95:2019 © IEC 2019 – 9 –
5.5 Addition:
Wicket doors are kept closed during the tests.
6 Classification
This clause of Part 1 is applicable except as follows.
6.1 Modification:
Drives shall be class I, class II or class III.
6.2 Addition:
Drives intended to be exposed to outdoor conditions shall be at least IPX4.
7 Marking and instructions
This clause of Part 1 is applicable except as follows.
7.1 Modification:
Drives shall be marked with the rated power input.
Addition:

Drives supplied without a door shall be marked with the rated load in N or in Nm.

7.12 Addition:
The instructions shall state the substance of the following:

WARNING: Important safety instructions. It is important for the safety of persons to

follow all instructions. Save these instructions.
The instructions shall include the substance of the following:

– do not allow children to play with door controls. Keep remote controls away from children;

– watch the moving door and keep people away until the door is completely opened or

closed (not necessary for automatic drives);

– take care when operating the manual release since an open door may fall rapidly due to

weak or broken springs, or being out of balance;

– frequently examine the installation, in particular check cables, springs and mountings for

signs of wear, damage or imbalance. Do not use if repair or adjustment is needed since a

fault in the installation or an incorrectly balanced door may cause injury;

– each month check that the drive reverses when the door contacts a 40 mm high object

placed on the floor. Adjust if necessary and recheck since an incorrect adjustment may

present a hazard;
– disconnect the supply when cleaning or carrying out other maintenance.
The instructions shall include the following information:
– details on how to use the manual release;
– information concerning the adjustment of the door and drive (when applicable).
---------------------- Page: 11 ----------------------
– 10 – IEC 60335-2-95:2019 © IEC 2019
Instructions for automatic drives shall state the substance of the following:
WARNING: Automatic door – The door may operate unexpectedly, therefore do not
allow anything to stay in the path of the door.
7.12.1 Addition:
The installation instructions shall state the substance of the following:
WARNING: Important safety instructions. Follow all instructions since incorrect
installation can lead to severe injury.

The installation instructions shall include details for the installation of the drive and its

associated components.

For drives supplied without a door, the installation instructions shall indicate the type, size

and mass of doors for which the drive is intended to be used.
The installation instructions shall include the substance of the following:

– before installing the drive, remove all unnecessary ropes or chains and disable any

equipment, such as locks, not needed for powered operation;

– before installing the drive, check that the door is in good mechanical condition, correctly

balanced and opens and closes properly;

– install the actuating member for the manual release at a height less than 1,8 m;

– install any fixed control at a height of at least 1,5 m and within sight of the door but away

from moving parts;
NOTE 101 It is not required to specify a minimum he
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.