IEC 60286-2:2022
(Main)Packaging of components for automatic handling - Part 2: Tape packaging of components with unidirectional leads on continuous tapes
Packaging of components for automatic handling - Part 2: Tape packaging of components with unidirectional leads on continuous tapes
IEC 60286-2:2022 applies to the tape packaging of components with two or more unidirectional leads for use in electronic equipment. It provides dimensions and tolerances necessary to tape components with unidirectional leads. In general, the tape is applied to the component leads.
It covers requirements for taping techniques used with equipment for automatic handling, pre-forming of leads, insertion and other operations and includes only those dimensions which are essential to the taping of components intended for the above-mentioned purposes.
This edition includes the following significant technical changes with respect to the previous edition:
a) complete revision of structure;
b) consolidation of essential parameters and requirements in Clause 4.
Emballage de composants pour opérations automatisées - Partie 2: Emballage des composants à sorties unilatérales en bandes continues
L’IEC 60286-2:2022 s’applique à l’emballage des composants à deux sorties unilatérales ou plus utilisés dans les équipements électroniques. Elle fournit les dimensions et tolérances nécessaires pour la mise sur bande des composants à sorties unilatérales. En général, la bande est appliquée aux sorties des composants.
Elle spécifie les exigences relatives aux techniques de mise sur bande utilisées avec les équipements pour les opérations automatisées, le préformage des sorties, l’insertion et d’autres opérations automatiques. Elle fournit uniquement les dimensions essentielles pour la mise sur bande de composants destinés aux opérations mentionnées ci-dessus.
Cette édition inclut les modifications techniques majeures suivantes par rapport à l’édition précédente:
révision complète de la structure;
consolidation des exigences et paramètres essentiels à l’Article 4.
General Information
Relations
Standards Content (Sample)
IEC 60286-2 ®
Edition 5.0 2022-11
INTERNATIONAL
STANDARD
NORME
INTERNATIONALE
Packaging of components for automatic handling –
Part 2: Tape packaging of components with unidirectional leads on continuous
tapes
Emballage de composants pour opérations automatisées –
Partie 2: Emballage des composants à sorties unilatérales en bandes continues
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form
or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from
either IEC or IEC's member National Committee in the country of the requester. If you have any questions about IEC
copyright or have an enquiry about obtaining additional rights to this publication, please contact the address below or
your local IEC member National Committee for further information.
Droits de reproduction réservés. Sauf indication contraire, aucune partie de cette publication ne peut être reproduite
ni utilisée sous quelque forme que ce soit et par aucun procédé, électronique ou mécanique, y compris la photocopie
et les microfilms, sans l'accord écrit de l'IEC ou du Comité national de l'IEC du pays du demandeur. Si vous avez des
questions sur le copyright de l'IEC ou si vous désirez obtenir des droits supplémentaires sur cette publication, utilisez
les coordonnées ci-après ou contactez le Comité national de l'IEC de votre pays de résidence.
IEC Secretariat Tel.: +41 22 919 02 11
3, rue de Varembé info@iec.ch
CH-1211 Geneva 20 www.iec.ch
Switzerland
About the IEC
The International Electrotechnical Commission (IEC) is the leading global organization that prepares and publishes
International Standards for all electrical, electronic and related technologies.
About IEC publications
The technical content of IEC publications is kept under constant review by the IEC. Please make sure that you have the
latest edition, a corrigendum or an amendment might have been published.
IEC publications search - webstore.iec.ch/advsearchform IEC Products & Services Portal - products.iec.ch
The advanced search enables to find IEC publications by a Discover our powerful search engine and read freely all the
variety of criteria (reference number, text, technical publications previews. With a subscription you will always
committee, …). It also gives information on projects, replaced have access to up to date content tailored to your needs.
and withdrawn publications.
Electropedia - www.electropedia.org
IEC Just Published - webstore.iec.ch/justpublished
The world's leading online dictionary on electrotechnology,
Stay up to date on all new IEC publications. Just Published
containing more than 22 300 terminological entries in English
details all new publications released. Available online and
and French, with equivalent terms in 19 additional languages.
once a month by email.
Also known as the International Electrotechnical Vocabulary
(IEV) online.
IEC Customer Service Centre - webstore.iec.ch/csc
If you wish to give us your feedback on this publication or
need further assistance, please contact the Customer Service
Centre: sales@iec.ch.
A propos de l'IEC
La Commission Electrotechnique Internationale (IEC) est la première organisation mondiale qui élabore et publie des
Normes internationales pour tout ce qui a trait à l'électricité, à l'électronique et aux technologies apparentées.
A propos des publications IEC
Le contenu technique des publications IEC est constamment revu. Veuillez vous assurer que vous possédez l’édition la
plus récente, un corrigendum ou amendement peut avoir été publié.
Recherche de publications IEC - IEC Products & Services Portal - products.iec.ch
webstore.iec.ch/advsearchform Découvrez notre puissant moteur de recherche et consultez
La recherche avancée permet de trouver des publications IEC gratuitement tous les aperçus des publications. Avec un
en utilisant différents critères (numéro de référence, texte, abonnement, vous aurez toujours accès à un contenu à jour
comité d’études, …). Elle donne aussi des informations sur adapté à vos besoins.
les projets et les publications remplacées ou retirées.
Electropedia - www.electropedia.org
IEC Just Published - webstore.iec.ch/justpublished
Le premier dictionnaire d'électrotechnologie en ligne au
Restez informé sur les nouvelles publications IEC. Just
monde, avec plus de 22 300 articles terminologiques en
Published détaille les nouvelles publications parues.
anglais et en français, ainsi que les termes équivalents dans
Disponible en ligne et une fois par mois par email.
19 langues additionnelles. Egalement appelé Vocabulaire
Electrotechnique International (IEV) en ligne.
Service Clients - webstore.iec.ch/csc
Si vous désirez nous donner des commentaires sur cette
publication ou si vous avez des questions contactez-nous:
sales@iec.ch.
IEC 60286-2 ®
Edition 5.0 2022-11
INTERNATIONAL
STANDARD
NORME
INTERNATIONALE
Packaging of components for automatic handling –
Part 2: Tape packaging of components with unidirectional leads on continuous
tapes
Emballage de composants pour opérations automatisées –
Partie 2: Emballage des composants à sorties unilatérales en bandes continues
INTERNATIONAL
ELECTROTECHNICAL
COMMISSION
COMMISSION
ELECTROTECHNIQUE
INTERNATIONALE
ICS 31.020; 31.240 ISBN 978-2-8322-6029-6
– 2 – IEC 60286-2:2022 © IEC 2022
CONTENTS
FOREWORD . 4
1 Scope . 6
2 Normative references . 6
3 Terms and definitions . 6
4 Dimensions and specific requirements . 7
4.1 General . 7
4.2 Coordinate system . 7
4.3 Lead taping dimensions . 8
4.4 Specific requirements to components and sprocket hole pitches (P, P , P ,
0 1
P , D ) . 11
2 0
4.5 Specific requirements to leads . 12
4.5.1 General . 12
4.5.2 Lead diameter (d, d ) . 12
4.5.3 Lead spacing (F, F , F ) . 12
1 2
4.6 Specific requirements to component position in taping (∆h, ∆p, ∆P ) . 12
4.7 Specific requirements to components with unguided leads . 12
4.7.1 Distance between the abscissa and tip of unguided lead (H ) . 12
4.7.2 Distance between the bottom of the component and the tip of the
unguided lead (H ) . 13
4.7.3 Distance between the lead terminal and the unguided lead (K) . 13
5 Requirements to taping . 13
5.1 Taping dimensions . 13
5.2 Polarity and orientation requirements of components on tape . 13
5.3 Adhesion to tape and extraction force for components . 14
5.4 Splices . 14
5.5 Tape leader and trailer . 14
6 Requirements to tape material . 15
6.1 Tape breaking force . 15
6.2 Tape material . 15
6.3 Hold-down tape . 15
7 Packing . 16
7.1 General . 16
7.2 Reel dimensions . 16
7.2.1 General . 16
7.2.2 Component tape reeling . 17
7.2.3 Component protection. 17
7.2.4 Reel filling . 17
7.3 Maximum dimensions of the fan-fold container . 17
7.4 Missing components . 18
7.5 Marking . 20
8 Recycling. 20
Annex A (normative) Dimensions for two leads . 21
A.1 Dimensions for two formed leads, sprocket hole between parts . 21
A.2 Dimensions for two formed leads, sprocket hole between leads . 23
A.3 Dimensions for two straight leads, sprocket hole between parts . 25
A.4 Dimensions for two straight leads, sprocket hole between leads . 27
Annex B (normative) Dimensions for three leads . 30
B.1 Dimensions for three formed leads, sprocket hole between parts . 30
B.2 Dimensions for three formed leads, sprocket hole between leads . 32
Bibliography . 35
Figure 1 – Abscissa, ordinate, reference plane and seating plane . 8
Figure 2 – Crimped or otherwise formed leads . 8
Figure 3 – Lead taping dimensions (straight leads) . 8
Figure 4 – Lead taping dimensions (crimped leads) . 9
Figure 5 – Lead taping dimensions – unguided leads . 9
Figure 6 – Front-to-back and lateral deviations . 10
Figure 7 – Position of short terminal without tape . 13
Figure 8 – Pull strength (extraction from taping) . 14
Figure 9 – Leader and trailer of tape . 15
Figure 10 – Symbols for reel dimensions . 16
Figure 11 – Reeling . 17
Figure 12 – Symbols for fan-fold container dimensions . 18
Figure 13 – Missing components . 19
Figure A.1 – Symbol references for two formed leads, sprocket hole between parts . 22
Figure A.2 – Symbol references for two formed leads, sprocket hole between leads . 24
Figure A.3 – Symbol references for two straight leads, sprocket hole between parts . 26
Figure A.4 – Symbol references for two straight leads, sprocket hole between leads . 28
Figure B.1 – Symbol references for three formed leads, sprocket hole between parts . 31
Figure B.2 – Symbol references for three formed leads, sprocket hole between leads . 33
Table 1 – Lead taping dimensions . 10
Table 2 – Reel dimensions . 16
Table 3 – Maximum outer dimensions for a fan-fold container . 18
Table A.1 – Dimensions for two formed leads, sprocket hole between parts . 23
Table A.2 – Dimensions for two formed leads, sprocket hole between leads . 25
Table A.3 – Dimensions for two straight
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.