IEC 60335-2-111:2024

Household and similar electrical appliances - Safety - Part 2-111: Particular requirements for electric ondol mattress with a non-flexible heated part

IEC 60335-2-111:2024 deals with the safety of electric ondol-mattresses for household and similar purposes, their rated voltage being not more than 250 V including direct current (DC) supplied appliances and battery-operated appliances. This standard also applies to control units supplied with the appliance.
Appliances not intended for normal household use, but that nevertheless can be a source of danger to the public, such as appliances intended to be used in community spas or by persons in cold ambient temperatures, are within the scope of this standard.
As far as is practicable, this standard deals with the common hazards presented by appliances that are encountered by all persons in and around the home. However, in general, it does not take into account:
- persons (including children) whose physical, sensory or mental capabilities; or lack of experience and knowledge prevents them from using the appliance safely without supervision or instruction;
- children playing with the appliance.
This standard does not apply to
- appliances intended exclusively for industrial purposes;
- appliances intended to be used in locations where special conditions prevail, such as the presence of a corrosive or explosive atmosphere (dust, vapour or gas);
- blankets, pads and similar flexible heating appliances (IEC 60335-2-17);
- room heaters (IEC 60335-2-30);
- water bed heaters (IEC 60335-2-66);
- heating appliances for breeding and rearing animals (IEC 60335-2-71);
- foot warmers and heating mats (IEC 60335-2-81);
- flexible sheet heating elements for room heating (IEC 60335-2-96);
- heated carpets and heating units for room heating installed under removable floor coverings (IEC 60335 2 106);
- appliances specifically intended for use under medical supervision (IEC 80601-2-35).
This second edition cancels and replaces the first edition published in 2015. This edition constitutes a technical revision
This edition includes the following significant technical changes with respect to the previous edition:
a) alignment with IEC 60335-1:2020;
b) conversion of some notes to normative text (Clause 1);
c) application of test probe 19 has been introduced (8.1.1, 20.2, B.22.3, B.22.4).
This part 2 is to be used in conjunction with the latest edition of IEC 60335-1 and its amendments unless that edition precludes it; in that case, the latest edition that does not preclude it is used. It was established on the basis of the sixth edition (2020) of that standard.

Appareils électrodomestiques et analogues - Sécurité - Part 2-111: Exigences particulières pour les matelas électriques ondol avec une partie chauffée non flexible

L'IEC 60335-2-111:2024 traite de la sécurité des matelas ondol électriques pour usages domestiques et analogues, dont la tension assignée est inférieure ou égale à 250 V, y compris les appareils alimentés en courant continu et les appareils alimentés par batteries. La présente norme s'applique également aux unités de commande fournies avec l'appareil. Les appareils non destinés à un usage domestique normal, mais qui peuvent néanmoins constituer une source de danger pour le public, tels que les appareils destinés à être utilisés dans les stations thermales ou par des personnes à des températures ambiantes froides, sont compris dans le domaine d'application de la présente norme.
Dans la mesure du possible, la présente norme traite des dangers ordinaires présentés par les appareils, encourus par tous les individus à l'intérieur et autour de l'habitation. Cependant, elle ne tient en général pas compte:
- des personnes (y compris des enfants) dont les capacités physiques, sensorielles ou mentales; ou le manque d'expérience et de connaissance les empêchent d'utiliser l'appareil en toute sécurité sans surveillance ou instruction;
- des enfants qui jouent avec l'appareil.
La présente norme ne s'applique pas
- aux appareils prévus exclusivement pour des usages industriels;
- aux appareils destinés à être utilisés dans des locaux qui présentent des conditions particulières, telles que la présence d'une atmosphère corrosive ou explosive (poussière, vapeur ou gaz);
- aux couvertures, coussins, vêtements et appareils chauffants souples analogues (IEC 60335-2-17);
- aux appareils de chauffage des locaux (IEC 60335-2-30);
- aux dispositifs de chauffage pour matelas à eau (IEC 60335-2-66);
- aux appareils de chauffage destinés à la reproduction et à l'élevage des animaux (IEC 60335-2-71);
- aux chancelières et carpettes chauffantes (IEC 60335-2-81);
- aux films souples chauffants pour le chauffage des locaux (IEC 60335-2-96);
- aux tapis chauffants et aux unités chauffantes pour le chauffage des locaux, installés sous des revêtements de sol amovibles (IEC 60335 2 106);
- aux appareils spécifiquement destinés à être utilisés sous surveillance médicale (IEC 80601-2-35).
Cette deuxième édition annule et remplace la première édition parue en 2015. Cette édition constitue une révision technique.
Cette édition inclut les modifications techniques majeures suivantes par rapport à l'édition précédente:
a) le texte a été aligné sur l'IEC 60335-1:2020;
b) certaines notes ont été converties en texte normatif (Article 1);
c) l'application du calibre d'essai 19 a été introduite (8.1.1, 20.2, B.22.3, B.22.4).
La présente partie 2 doit être utilisée conjointement avec la dernière édition de l'IEC 60335-1 et ses amendements sauf si cette édition l'exclut. Dans ce cas, la dernière édition qui n'exclut pas la présente partie 2 est utilisée. Elle a été établie sur la base de la sixième édition (2020) de cette norme.

General Information

• Status: Published
• Publication Date: 14-Oct-2024
• ICS: 13.120 - Domestic safety
• ICS: 97.100.10 - Electric heaters
• ICS: 97.140 - Furniture
• Technical Committee: TC 61 - Safety of household and similar electrical appliances
• Drafting Committee: MT 37 - TC 61/MT 37
• Current Stage: PPUB - Publication issued
• Start Date: 25-Oct-2024
• Completion Date: 14-Oct-2024

Relations

• Revises: IEC 60335-2-111:2015 - Household and similar electrical appliances - Safety - Part 2-111: Particular requirements for electric ondol mattress with a non-flexible heated part
• Effective Date: 05-Sep-2023

Standards Content (Sample)

IEC 60335-2-111 ®
Edition 2.0 2024-10
REDLINE VERSION
INTERNATIONAL
STANDARD
colour
inside
Household and similar electrical appliances – Safety –
Part 2-111: Particular requirements for electric ondol-mattress with a non-
flexible heated part
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form
or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from
either IEC or IEC's member National Committee in the country of the requester. If you have any questions about IEC
copyright or have an enquiry about obtaining additional rights to this publication, please contact the address below or
your local IEC member National Committee for further information.

IEC Secretariat Tel.: [phone]
3, rue de Varembé [e-mail]
CH-1211 Geneva 20 www.iec.ch
Switzerland
About the IEC
The International Electrotechnical Commission (IEC) is the leading global organization that prepares and publishes
International Standards for all electrical, electronic and related technologies.

About IEC publications
The technical content of IEC publications is kept under constant review by the IEC. Please make sure that you have the
latest edition, a corrigendum or an amendment might have been published.

IEC publications search - webstore.iec.ch/advsearchform IEC Products & Services Portal - products.iec.ch
The advanced search enables to find IEC publications by a Discover our powerful search engine and read freely all the
variety of criteria (reference number, text, technical publications previews, graphical symbols and the glossary.
committee, …). It also gives information on projects, replaced With a subscription you will always have access to up to date
and withdrawn publications. content tailored to your needs.

IEC Just Published - webstore.iec.ch/justpublished
Electropedia - www.electropedia.org
Stay up to date on all new IEC publications. Just Published
The world's leading online dictionary on electrotechnology,
details all new publications released. Available online and once
containing more than 22 500 terminological entries in English
a month by email.
and French, with equivalent terms in 25 additional languages.

Also known as the International Electrotechnical Vocabulary
IEC Customer Service Centre - webstore.iec.ch/csc
(IEV) online.
If you wish to give us your feedback on this publication or need

further assistance, please contact the Customer Service
Centre: [e-mail].
IEC 60335-2-111 ®
Edition 2.0 2024-10
REDLINE VERSION
INTERNATIONAL
STANDARD
colour
inside
Household and similar electrical appliances – Safety –
Part 2-111: Particular requirements for electric ondol-mattress with a non-
flexible heated part
INTERNATIONAL
ELECTROTECHNICAL
COMMISSION
ICS 13.120, 97.100.10, 97.140 ISBN 978-2-8322-9875-6

– 2 – IEC 60335-2-111:2024 RLV © IEC 2024
CONTENTS
FOREWORD . 4
INTRODUCTION . 2
1 Scope . 8
2 Normative references . 9
3 Terms and definitions . 9
4 General requirement . 10
5 General conditions for the tests . 10
6 Classification . 10
7 Marking and instructions . 10
8 Protection against access to live parts . 11
9 Starting of motor-operated appliances . 11
10 Power input and current . 11
11 Heating . 11
12 Void Charging of metal-ion batteries . 12
13 Leakage current and electric strength at operating temperature . 12
14 Transient overvoltages . 13
15 Moisture resistance . 13
16 Leakage current and electric strength . 13
17 Overload protection of transformers and associated circuits . 13
18 Endurance . 14
19 Abnormal operation . 14
20 Stability and mechanical hazards . 14
21 Mechanical strength . 15
22 Construction . 15
23 Internal wiring . 16
24 Components . 16
25 Supply connection and external flexible cords . 16
26 Terminals for external conductors . 16
27 Provision for earthing . 16
28 Screws and connections . 17
29 Clearances, creepage distances and solid insulation . 17
30 Resistance to heat and fire . 17
31 Resistance to rusting . 17
32 Radiation, toxicity and similar hazards . 17
Annexes . 19
Annex B (normative) Battery-operated appliances, separable batteries and detachable
batteries for battery-operated appliances . 20
Annex AA (normative) Specification for thermal insulation . 21
Bibliography . 22

Figure 101 – Arrangement for measuring leakage current and electric strength of the
ondol-mattress . 18
Figure 102 – Positioning of the thermal insulation on an ondol-mattress incorporating

thermostats . 18

– 4 – IEC 60335-2-111:2024 RLV © IEC 2024
INTERNATIONAL ELECTROTECHNICAL COMMISSION
____________
HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES –
SAFETY –
Part 2-111: Particular requirements for electric ondol-mattress
with a non-flexible heated part

FOREWORD
1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising
all national electrotechnical committees (IEC National Committees). The object of IEC is to promote international
co-operation on all questions concerning standardization in the electrical and electronic fields. To this end and
in addition to other activities, IEC publishes International Standards, Technical Specifications, Technical Reports,
Publicly Available Specifications (PAS) and Guides (hereafter referred to as "IEC Publication(s)"). Their
preparation is entrusted to technical committees; any IEC National Committee interested in the subject dealt with
may participate in this preparatory work. International, governmental and non-governmental organizations liaising
with the IEC also participate in this preparation. IEC collaborates closely with the International Organization for
Standardization (ISO) in accordance with conditions determined by agreement between the two organizations.
2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international
consensus of opinion on the relevant subjects since each technical committee has representation from all
interested IEC National Committees.
3) IEC Publications have the form of recommendations for international use and are accepted by IEC National
Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC
Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any
misinterpretation by any end user.
4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications
transparently to the maximum extent possible in their national and regional publications. Any divergence between
any IEC Publication and the corresponding national or regional publication shall be clearly indicated in the latter.
5) IEC itself does not provide any attestation of conformity. Independent certification bodies provide conformity
assessment services and, in some areas, access to IEC marks of conformity. IEC is not responsible for any
services carried out by independent certification bodies.
6) All users should ensure that they have the latest edition of this publication.
7) No liability shall attach to IEC or its directors, employees, servants or agents including individual experts and
members of its technical committees and IEC National Committees for any personal injury, property damage or
other damage of any nature whatsoever, whether direct or indirect, or for costs (including legal fees) and
expenses arising out of the publication, use of, or reliance upon, this IEC Publication or any other IEC
Publications.
8) Attention is drawn to the Normative references cited in this publication. Use of the referenced publications is
indispensable for the correct application of this publication.
9) IEC draws attention to the possibility that the implementation of this document may involve the use of (a)
patent(s). IEC takes no position concerning the evidence, validity or applicability of any claimed patent rights in
respect thereof. As of the date of publication of this document, IEC had not received notice of (a) patent(s), which
may be required to implement this document. However, implementers are cautioned that this may not represent
the latest information, which may be obtained from the patent database available at https://patents.iec.ch. IEC
shall not be held responsible for identifying any or all such patent rights.
This redline version of the official IEC Standard allows the user to identify the changes
made to the previous edition IEC 60335-2-111:2015. A vertical bar appears in the margin
wherever a change has been made. Additions are in green text, deletions are in
strikethrough red text.
IEC 60335-2-111 has been prepared by IEC technical committee 61: Safety of household and
similar electrical appliances. It is an International Standard.
This second edition cancels and replaces the first edition published in 2015. This edition
constitutes a technical revision
This edition includes the following significant technical changes with respect to the previous
edition:
a) alignment with IEC 60335-1:2020;
b) conversion of some notes to normative text (Clause 1);
c) application of test probe 19 has been introduced (8.1.1, 20.2, B.22.3, B.22.4).
The text of this International Standard is based on the following documents:
Draft Report on voting
61/7280/FDIS 61/7303/RVD
Full information on the voting for its approval can be found in the report on voting indicated in
the above table.
The language used for the development of this International Standard is English.
This document was drafted in accordance with ISO/IEC Directives, Part 2, and developed in
accordance with ISO/IEC Directives, Part 1 and ISO/IEC Directives, IEC Supplement, available
at www.iec.ch/members_experts/refdocs. The main document types developed by IEC are
described in greater detail at www.iec.ch/publications.
A list of all parts of the IEC 60335 series, under the general title: Household and similar
electrical appliances – Safety, can be found on the IEC website.
This part 2 is to be used in conjunction with the latest edition of IEC 60335-1 and its
amendments unless that edition precludes it; in that case, the latest edition that does not
preclude it is used. It was established on the basis of the sixth edition (2020) of that standard.
NOTE 1 When "Part 1" is mentioned in th
...

IEC 60335-2-111 ®
Edition 2.0 2024-10
EXTENDED VERSION
INTERNATIONAL
STANDARD
colour
inside
This full version of IEC 60335-2-111:2024 includes the content of the references made to
IEC 60335-1:2020
Household and similar electrical appliances – Safety –
Part 2-111: Particular requirements for electric ondol mattress with a non-
flexible heated part
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form
or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from
either IEC or IEC's member National Committee in the country of the requester. If you have any questions about IEC
copyright or have an enquiry about obtaining additional rights to this publication, please contact the address below or
your local IEC member National Committee for further information.

IEC Secretariat Tel.: [phone]
3, rue de Varembé [e-mail]
CH-1211 Geneva 20 www.iec.ch
Switzerland
About the IEC
The International Electrotechnical Commission (IEC) is the leading global organization that prepares and publishes
International Standards for all electrical, electronic and related technologies.

About IEC publications
The technical content of IEC publications is kept under constant review by the IEC. Please make sure that you have the
latest edition, a corrigendum or an amendment might have been published.

IEC publications search - webstore.iec.ch/advsearchform IEC Products & Services Portal - products.iec.ch
The advanced search enables to find IEC publications by a Discover our powerful search engine and read freely all the
variety of criteria (reference number, text, technical publications previews, graphical symbols and the glossary.
committee, …). It also gives information on projects, replaced With a subscription you will always have access to up to date
and withdrawn publications. content tailored to your needs.

IEC Just Published - webstore.iec.ch/justpublished
Electropedia - www.electropedia.org
Stay up to date on all new IEC publications. Just Published
The world's leading online dictionary on electrotechnology,
details all new publications released. Available online and once
containing more than 22 500 terminological entries in English
a month by email.
and French, with equivalent terms in 25 additional languages.

Also known as the International Electrotechnical Vocabulary
IEC Customer Service Centre - webstore.iec.ch/csc
(IEV) online.
If you wish to give us your feedback on this publication or need

further assistance, please contact the Customer Service
Centre: [e-mail].
IEC 60335-2-111 ®
Edition 2.0 2024-10
EXTENDED VERSION
INTERNATIONAL
STANDARD
colour
inside
This full version of IEC 60335-2-111:2024 includes the content of the references made to
IEC 60335-1:2020
Household and similar electrical appliances – Safety –
Part 2-111: Particular requirements for electric ondol mattress with a non-
flexible heated part
INTERNATIONAL
ELECTROTECHNICAL
COMMISSION
ICS 13.120, 97.100.10, 97.140 ISBN 978-2-8322-9876-3

IEC 60335-1:2020/ISH1:2021 – 1 –
© IEC 2021
INTERNATIONAL ELECTROTECHNICAL COMMISSION
____________
IEC 60335-1
Edition 6.0  2020-09
HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES – SAFETY –

Part 1: General requirements
INTERPRETATION SHEET 1
This interpretation sheet has been prepared by IEC technical committee 61: Safety of
household and similar electrical appliances.
The text of this Interpretation Sheet is based on the following documents:
Draft Report on voting
61/5999/DISH 61/6009/RVDISH
Full information on the voting for its approval can be found in the report on voting indicated in
the above table.
___________
INTRODUCTION
Edition 6 of IEC 60335-1:2020 defines and introduces requirements for a detachable
power supply part of an appliance. In the document, 24.2 prohibits the use of a power
supply in a flexible cord.
QUESTION:
Does Subclause 24.2 prohibit the use of a detachable power supply part?
ANSWER
No, a "detachable power supply part" is a defined term and is not captured by the term
"power supply" as used in Subclause 24.2.
NOTE A detachable power supply part is captured by the defined term when the output of the power supply
part is detachable from the class III construction part of the appliance at:
– the power supply part, or
– the class III construction part of the appliance.
However, the supply cord (if any) does not have to be detachable from the detachable power supply part.
ICS 13.120; 97.030
IEC 60335-1:2020-09/ISH1:2021-11(en)

– 2 – IEC 60335-2-111:2024 EXV © IEC 2024
CONTENTS
FOREWORD . 6
INTRODUCTION to IEC 60335-1:2020 . 9
INTRODUCTION to IEC 60335-2-111:2024 . 11
1 Scope . 12
2 Normative references . 12
3 Terms and definitions . 17
4 General requirement . 29
5 General conditions for the tests . 29
6 Classification . 34
7 Marking and instructions . 34
8 Protection against access to live parts . 43
9 Starting of motor-operated appliances . 45
10 Power input and current . 45
11 Heating . 47
12 Charging of metal-ion batteries . 53
13 Leakage current and electric strength at operating temperature . 55
14 Transient overvoltages . 57
15 Moisture resistance . 58
16 Leakage current and electric strength . 61
17 Overload protection of transformers and associated circuits . 63
18 Endurance . 64
19 Abnormal operation . 64
20 Stability and mechanical hazards . 75
21 Mechanical strength . 76
22 Construction . 78
23 Internal wiring . 91
24 Components . 93
25 Supply connection and external flexible cords . 98
26 Terminals for external conductors . 106
27 Provision for earthing . 109
28 Screws and connections . 110
29 Clearances, creepage distances and solid insulation . 113
30 Resistance to heat and fire . 121
31 Resistance to rusting . 125
32 Radiation, toxicity and similar hazards . 125
Annex A (informative) Routine tests . 140
Annex B (normative) Battery-operated appliances, separable batteries and detachable
batteries for battery-operated appliances . 142
Annex C (normative) Ageing test on motors . 163
Annex D (normative) Thermal motor protectors . 164
Annex E (normative) Needle-flame test . 165
Annex F (normative) Capacitors . 166

Annex G (normative) Safety isolating transformers . 168
Annex H (normative) Switches . 169
Annex I (normative) Motors having basic insulation that is inadequate for the rated
voltage of the appliance . 171
Annex J (normative) Coated printed circuit boards . 173
Annex K (informative) Overvoltage categories . 174
Annex L (informative) Guidance for the measurement of clearances and creepage

distances . 175
Annex M (informative) Pollution degree . 178
Annex N (normative) Proof tracking test . 179
Annex O (informative) Selection and sequence of the tests of Clause 30 . 180
Annex P (informative) Guidance for the application of this standard to appliances
used in tropical climates . 185
Annex Q (informative) Sequence of tests for the evaluation of electronic circuits . 187
Annex R (normative) Software evaluation . 190
Annex S (informative) Guidance for the application of this standard on measurement
of power input and current based on the requirements of 10.1 and 10.2 concerning the

representative period . 204
Annex T (normative) UV-C radiation effect on non-metallic materials . 205
Annex U (normative) Appliances intended for remote communication through public
networks . 208
Annex AA (normative) Specification for thermal insulation . 212
Bibliography . 213
Index of defined terms . 216

Figure 1 – Circuit diagram for leakage current measurement at operating temperature
for single-phase connection of class II appliances and for parts of class ll construction . 126
Figure 2 – Circuit diagram for leakage current measurement at operating temperature
for single-phase connection of other than class II appliances or parts of class ll
construction . 127
Figure 3 – Circuit diagram for leakage current measurement at operating temperature
for three-phase with neutral class II appliances and for parts of class ll construction . 128
Figure 4 – Circuit diagram for leakage current measurement at operating temperature
for three-phase with neutral appliances other than those of class II or parts of class ll
construction . 129
Figure 5 – Small part . 130
Figure 6 – Example of an electronic circuit with low-power points . 130
Figure 7 – Test finger nail . 131
Figure 8 – Flexing test apparatus . 132
Figure 9 – Constructions of cord anchorages . 133
Figure 10
...