iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
IEC

IEC 62071-2:2005

(Main)

Helical-scan compressed digital video cassette system using 6,35 mm magnetic tape - Format D-7 - Part 2: Compression format

Helical-scan compressed digital video cassette system using 6,35 mm magnetic tape - Format D-7 - Part 2: Compression format

IEC 62071-2:2005 defines the DV-based data structure for the interface of digital audio, subcode data and compressed video with the following parameters:
- 525/60 system - 4:1:1 image sampling structure, 25 Mb/s data rate;
- 525/60 system - 4:2:2 image sampling structure, 50 Mb/s data rate;
- 625/50 system - 4:1:1 image sampling structure, 25 Mb/s data rate;
- 625/50 system - 4:2:2 image sampling structure, 50 Mb/s data rate. This bilingual version (2013-07) corresponds to the monolingual English version, published in 2005-10.

Système de magnétoscope numérique à cassette à balayage hélicoïdal à signal compressé utilisant une bande magnétique de 6,35 mm - Format D-7 - Partie 2: Format de compression

La CEI 62071-2:2005 définit la structure de données sur base DV pour l'interface des données audionumériques, de sous-code, et vidéo comprimées avec les paramètres suivants:
- système 525/60 - structure d'échantillonnage de l'image 4:1:1, débit de données 25 Mb/s;
- système 525/60 - structure d'échantillonnage de l'image 4:2:2, débit de données 50 Mb/s;
- système 625/50 - structure d'échantillonnage de l'image 4:1:1, débit de données 25 Mb/s;
- système 625/50 - structure d'échantillonnage de l'image 4:2:2, débit de données 50 Mb/s. La présente version bilingue (2013-07) correspond à la version anglaise monolingue publiée en 2005-10.

General Information

Status
Published
Publication Date
26-Oct-2005
ICS
01 - GENERALITIES. TERMINOLOGY. STANDARDIZATION. DOCUMENTATION
33.160.40 - Video systems
Technical Committee
TA 6 - Storage media, storage data structures, storage systems and equipment
Current Stage
PPUB - Publication issued
Start Date
15-Dec-2005
Completion Date
27-Oct-2005
Ref Project

Buy Standard

IEC 62071-2:2005 - Helical-scan compressed digital video cassette system using 6,35 mm magnetic tape - Format D-7 - Part 2: Compression formatIEC 62071-2:2005 - Helical-scan compressed digital video cassette system using 6,35 mm magnetic tape - Format D-7 - Part 2: Compression format
PreviousNext
Standard
IEC 62071-2:2005 - Helical-scan compressed digital video cassette system using 6,35 mm magnetic tape - Format D-7 - Part 2: Compression format
English and French language
142 pages
sale 15% off
Preview
sale 15% off
Preview

Standards Content (Sample)

IEC 62071-2
®

Edition 1.0 2005-10
INTERNATIONAL
STANDARD
NORME
INTERNATIONALE


Helical-scan compressed digital video cassette system using 6,35 mm magnetic
tape – Format D-7 –
Part 2: Compression format

Système de magnétoscope numérique à cassette à balayage hélicoïdal à signal
compressé utilisant une bande magnétique de 6,35 mm – Format D-7 –
Partie 2: Format de compression

IEC 62071-2:2005

---------------------- Page: 1 ----------------------
THIS PUBLICATION IS COPYRIGHT PROTECTED
Copyright © 2005 IEC, Geneva, Switzerland

All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form
or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from
either IEC or IEC's member National Committee in the country of the requester.
If you have any questions about IEC copyright or have an enquiry about obtaining additional rights to this publication,
please contact the address below or your local IEC member National Committee for further information.


Droits de reproduction réservés. Sauf indication contraire, aucune partie de cette publication ne peut être reproduite ni
utilisée sous quelque forme que ce soit et par aucun procédé, électronique ou mécanique, y compris la photocopie et les
microfilms, sans l'accord écrit de la CEI ou du Comité national de la CEI du pays du demandeur.
Si vous avez des questions sur le copyright de la CEI ou si vous désirez obtenir des droits supplémentaires sur cette
publication, utilisez les coordonnées ci-après ou contactez le Comité national de la CEI de votre pays de résidence.

IEC Central Office Tel.: +41 22 919 02 11
3, rue de Varembé Fax: +41 22 919 03 00
CH-1211 Geneva 20 info@iec.ch
Switzerland www.iec.ch

About the IEC
The International Electrotechnical Commission (IEC) is the leading global organization that prepares and publishes
International Standards for all electrical, electronic and related technologies.

About IEC publications
The technical content of IEC publications is kept under constant review by the IEC. Please make sure that you have the
latest edition, a corrigenda or an amendment might have been published.

Useful links:

IEC publications search - www.iec.ch/searchpub Electropedia - www.electropedia.org
The advanced search enables you to find IEC publications The world's leading online dictionary of electronic and
by a variety of criteria (reference number, text, technical electrical terms containing more than 30 000 terms and
committee,…). definitions in English and French, with equivalent terms in
It also gives information on projects, replaced and additional languages. Also known as the International
withdrawn publications. Electrotechnical Vocabulary (IEV) on-line.

IEC Just Published - webstore.iec.ch/justpublished Customer Service Centre - webstore.iec.ch/csc
Stay up to date on all new IEC publications. Just Published If you wish to give us your feedback on this publication
details all new publications released. Available on-line and or need further assistance, please contact the
also once a month by email. Customer Service Centre: csc@iec.ch.


A propos de la CEI
La Commission Electrotechnique Internationale (CEI) est la première organisation mondiale qui élabore et publie des
Normes internationales pour tout ce qui a trait à l'électricité, à l'électronique et aux technologies apparentées.

A propos des publications CEI
Le contenu technique des publications de la CEI est constamment revu. Veuillez vous assurer que vous possédez
l’édition la plus récente, un corrigendum ou amendement peut avoir été publié.

Liens utiles:

Recherche de publications CEI - www.iec.ch/searchpub Electropedia - www.electropedia.org
La recherche avancée vous permet de trouver des Le premier dictionnaire en ligne au monde de termes
publications CEI en utilisant différents critères (numéro de électroniques et électriques. Il contient plus de 30 000
référence, texte, comité d’études,…). termes et définitions en anglais et en français, ainsi que
Elle donne aussi des informations sur les projets et les les termes équivalents dans les langues additionnelles.
publications remplacées ou retirées. Egalement appelé Vocabulaire Electrotechnique
International (VEI) en ligne.
Just Published CEI - webstore.iec.ch/justpublished
Service Clients - webstore.iec.ch/csc
Restez informé sur les nouvelles publications de la CEI.
Just Published détaille les nouvelles publications parues. Si vous désirez nous donner des commentaires sur
Disponible en ligne et aussi une fois par mois par email. cette publication ou si vous avez des questions
contactez-nous: csc@iec.ch.

---------------------- Page: 2 ----------------------
IEC 62071-2

®


Edition 1.0 2005-10




INTERNATIONAL



STANDARD




NORME



INTERNATIONALE











Helical-scan compress
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

IEC
IEC TS 62871-2:2019(Main)
Professional video storage products - Tape-less camera recorder using MXF file format - Encoding guidelines - Part 2: Mapping MPEG-2 and AVC Streams into MXF

IEC TS 62871-2:2019 specifies implementation guidelines for mapping MPEG-2 video and AVC streams into MXF file format for professional tape-less camera recorders.
The guidelines are applicable to the creation of an MXF file in professional tape-less camera recorders. They are also applicable for content management software and to equipment that supports MXF files generated by professional tape-less camera recorders.

  • Technical specification
    14 pages
    English language
    sale 15% off
IEC
IEC 62071-3:2005(Main)
Helical-scan compressed digital video cassette system using 6,35 mm magnetic tape - Format D-7 - Part 3: Data stream format

IEC 62071-3:2005 defines the format of the data stream for the synchronous exchange of DV-based audio, data, and compressed video (whose data structure is defined in SMPTE 314M) over the interface defined in SMPTE 305M. It covers the transmission of audio, subcode data and compressed video packets associated with DV-based 25 and 50 Mb/s data structures including faster-than-real-time transmission for 525/60 SDTI and 625/50 SDTI systems. This bilingual version (2013-07) corresponds to the monolingual English version, published in 2005-10.

  • Standard
    56 pages
    English and French language
    sale 15% off
IEC
IEC 62356-3:2003(Main)
Video recording - 12,65 mm type D-11 format - Part 3: Data mapping over SDTI

IEC 62356-3:2003 specifies the mapping of type D-11 compressed picture data stream into the SDTI payload area (SMPTE 305.2M) together with the mapping of four channels of AES3 data and time-code data into H-ANC packets. Type D-11 compressed picture data-stream mapping is defined for source-coded picture rates of 24/1,001/P, 24/P, 25/P, 50-I, 30/1,001/P and 60/1,001. For the transmission of compressed picture data coded at source picture rates of 25/P and 50/I, the SDTI interface operates at a frame rate of 25 Hz. For the transmission of compressed picture data coded at source picture rates of 30/1,001P and 60/1,001I, the SDTI interface operates at a frame rate of 30/1,001 Hz.

  • Standard
    31 pages
    English and French language
    sale 15% off
IEC
IEC 61834-1:1998/AMD1:2001(Amendment)
Amendment 1 - Recording - Helical-scan digital video cassette recording system using 6,35 mm magnetic tape for consumer use (525-60, 625-50, 1125-60 and 1250-50 systems) - Part 1: General specifications
  • Standard
    9 pages
    English and French language
    sale 15% off
IEC
IEC 61966-12-1:2020(Main)
Multimedia systems and equipment - Colour measurement and management - Part 12-1: Metadata for identification of colour gamut (Gamut ID)

IEC 61966-12-1:2020 is available as IEC 61966-12-1:2020 RLV which contains the International Standard and its Redline version, showing all changes of the technical content compared to the previous edition.
IEC 61966-12-1:2020 defines the colour gamut metadata scheme for video systems and similar applications. The metadata can be associated with wide-gamut video colour content or to a piece of equipment to display the content. When associated with content, the colour gamut metadata defines the gamut for which the content was created. It can be used by the display for controlled colour reproduction even if the display’s colour gamut is different from that of the content. When associated with a display, the colour gamut metadata defines the display colour gamut. It can be used during content creation to enable improved colour reproduction. The colour gamut metadata can cover associated colour encoding information, which includes all information required for a controlled colour reproduction, when such information is not provided by the colour encoding specification. The colour gamut metadata scheme provides scalable solutions. For example, more flexible solutions will be used for the professional use, while much simpler solutions will be used for consumer use with easier product implementation. This part of IEC 61966 only defines the colour gamut metadata scheme. Vendor-specific solutions for creation and end-use of this metadata are allowed. IEC 61966-12-1:2020 cancels and replaces the first edition published in 2011. This edition constitutes a technical revision. This edition includes the following significant technical changes with respect to the previous edition:
a) ITU-R BT.2020 colour spaces added in Clause 6;
b) ITU-R BT.2100 colour spaces added in Clause 6.

  • Standard
    81 pages
    English and French language
    sale 15% off
IEC
IEC 61897:2020(Main)
Overhead lines - Requirements and tests for Aeolian vibration dampers

IEC 61897:2020 is available as IEC 61897:2020 RLV which contains the International Standard and its Redline version, showing all changes of the technical content compared to the previous edition.
IEC 61897:2020 applies to aeolian vibration dampers intended for single conductors or earth wires or conductor bundles where dampers are directly attached to each subconductor. The purchaser may adopt part(s) of this document when specifying requirements for cables different from those mentioned above (e.g. optical ground wires (OPGW), all dielectric self-supporting optical cables (ADSS)). In some cases, test procedures and test values are left to agreement between the purchaser and the supplier and are stated in the procurement contract. Annex A lists the minimum technical details to be agreed between purchaser and supplier. Throughout this document, the word “conductor” is used when the test applies to dampers for conductors or earth wires. This second edition cancels and replaces the first edition published in 1998. This edition constitutes a technical revision. This edition includes the following significant technical changes with respect to the previous edition:
a) Consider, in addition to Stockbridge type aeolian vibration dampers, also spiral aeolian vibration dampers and elastomeric aeolian vibration dampers.
b) Consider the application of dampers on high temperature conductors, specifying additional high temperature tests in clamp slip tests.
c) Simplify the procedure of the damper effectiveness evaluation.
d) Introduce test at low temperature on fastener components such as break away bolts and conical spring washers.
e) Include figures showing the test arrangements for the main mechanical tests.
Key words: Overhead Lines, Aeolian Vibration Dampers

  • Standard
    58 pages
    English and French language
    sale 15% off
IEC
IEC 63005-2:2019(Main)
Event video data recorder for road vehicle accidents - Part 2: Test methods for evaluating the performance of basic functions

IEC 63005-2:2019 describes test methods on evaluating performance of basic functionalities of EVDR described in IEC 63005-1.

  • Standard
    33 pages
    English and French language
    sale 15% off
IEC
IEC TS 62871-2:2019(Main)
Professional video storage products - Tape-less camera recorder using MXF file format - Encoding guidelines - Part 2: Mapping MPEG-2 and AVC Streams into MXF

IEC TS 62871-2:2019 specifies implementation guidelines for mapping MPEG-2 video and AVC streams into MXF file format for professional tape-less camera recorders.
The guidelines are applicable to the creation of an MXF file in professional tape-less camera recorders. They are also applicable for content management software and to equipment that supports MXF files generated by professional tape-less camera recorders.

  • Technical specification
    14 pages
    English language
    sale 15% off
IEC
IEC 60076-21:2018(Main)
Power transformers - Part 21: Standard requirements, terminology, and test code for step-voltage regulators

IEC 60076-21:2018 describes electrical, mechanical and test requirements of liquid-immersed, single- and three-phase, 50 Hz and 60 Hz, self and forced-air cooled, distribution, overhead and substation, step-voltage regulators, 1 000 kVA (single-phase units) or 3 000 kVA (three-phase units) and smaller, 34 500 volts and below (2 400 V minimum) and their associated controls. Requirements, references and definitions relevant to either IEC or IEEE contexts are given and their use is described in Clause 4. This publication is published as an IEC/IEEE Dual Logo standard. This second edition cancels and replaces IEC 60076-21, published in 2011, and IEEE Std C57.15-2009. This edition includes the following significant technical changes with respect to IEC 60076­21:2011/IEEE Std C57.15-2009:
a) updated list of normative and bibliography IEC and IEEE references and their associated text;
b) updated tables of preferred ratings for inclusion of maximum system voltage (Um), nominal system voltage and rated voltage (Ur);
c) inclusion of tables for optional fan-cooled ratings, external dielectric clearances and sound pressure levels;
d) revision of short-circuit requirements for distribution and substation voltage regulators;
e) inclusion of an universal interface between control enclosure and apparatus;
f) inclusion of tap-changer routine and type tests;
g) inclusion of audible sound pressure emissions test procedures;
h) inclusion of tank enclosure integrity type test procedures;
i) update of control environmental IEC reference test standard.
Keywords: step-voltage regulators

  • Standard
    144 pages
    English language
    sale 15% off
IEC
IEC 62106-2:2018(Main)
Radio data system (RDS) - VHF/FM sound broadcasting in the frequency range from 64,0 MHz to 108,0 MHz - Part 2: Message format: Coding and definition of RDS features

IEC 62106-2:2018 defines the coding and definition of features for the Radio Data System (RDS).
IEC 62106-2:2018 together with IEC 62106-1, IEC 62106-3, IEC 62106-4, IEC 62106-5 and IEC 62106-6, cancels and replaces IEC 62106:2015, and constitutes a technical revision.
This edition includes the following significant technical changes with respect to IEC 62106:2015:
• Provision has been made to carry RDS on multiple data-streams (RDS2).
• Data in the additional data-streams is using a newly defined group type C data structure.
• AF coding below 87,6 MHz (down to 64,1 MHz) using ODA-AID 0x6365 (see IEC 62106-6).
• Long PS (UTF-8) support has been added using group type 15A.
• Coding for the following applications is no longer detailed in the RDS standard as these can use in future the ODA concept: EWS, TDC, IH and RP.
• Obsolete and no longer part of the RDS standard are: MS (Group 0A, 0B and 15B) certain DI codes (mono/stereo, artificial head, compression), Language code, and PIN (Group 1A).

  • Standard
    46 pages
    English language
    sale 15% off