ISO 7130:2013
(Main)Earth-moving machinery — Operator training — Content and methods
Earth-moving machinery — Operator training — Content and methods
ISO 7130:2013 provides a basis for content and methods used for operator training for earth-moving machinery as defined in ISO 6165. This training in turn provides the basis for developing operators of earth-moving machinery who are knowledgeable and understand the manufacturer's instructions for safe and proper operation and routine maintenance. It establishes criteria for evaluating the competency of a person who operates and could perform routine maintenance of earth-moving machinery, but does not specify any procedure for proficiency testing or assessment of the operator's competence of operating and maintaining earth-moving machinery. It is not intended to substitute for national or regional requirements or regulations related to operator training.
Engins de terrassement — Formation du conducteur — Contenu et méthodes
General Information
Relations
Standards Content (Sample)
INTERNATIONAL ISO
STANDARD 7130
Second edition
2013-04-15
Earth-moving machinery — Operator
training — Content and methods
Engins de terrassement — Formation du conducteur — Contenu et
méthodes
Reference number
ISO 7130:2013(E)
©
ISO 2013
---------------------- Page: 1 ----------------------
ISO 7130:2013(E)
COPYRIGHT PROTECTED DOCUMENT
© ISO 2013
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized otherwise in any form
or by any means, electronic or mechanical, including photocopying, or posting on the internet or an intranet, without prior
written permission. Permission can be requested from either ISO at the address below or ISO’s member body in the country of
the requester.
ISO copyright office
Case postale 56 • CH-1211 Geneva 20
Tel. + 41 22 749 01 11
Fax + 41 22 749 09 47
E-mail copyright@iso.org
Web www.iso.org
Published in Switzerland
ii © ISO 2013 – All rights reserved
---------------------- Page: 2 ----------------------
ISO 7130:2013(E)
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards
bodies (ISO member bodies). The work of preparing International Standards is normally carried out
through ISO technical committees. Each member body interested in a subject for which a technical
committee has been established has the right to be represented on that committee. International
organizations, governmental and non-governmental, in liaison with ISO, also take part in the work.
ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of
electrotechnical standardization.
International Standards are drafted in accordance with the rules given in the ISO/IEC Directives, Part 2.
The main task of technical committees is to prepare International Standards. Draft International
Standards adopted by the technical committees are circulated to the member bodies for voting.
Publication as an International Standard requires approval by at least 75 % of the member bodies
casting a vote.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. ISO shall not be held responsible for identifying any or all such patent rights.
ISO 7130 was prepared by Technical Committee ISO/TC 127, Earth-moving machinery, Subcommittee
SC 3, Machine characteristics, electrical and electronic systems, operation and maintenance.
This second edition cancels and replaces the first edition (ISO 7130:1981), which has been technically revised.
© ISO 2013 – All rights reserved iii
---------------------- Page: 3 ----------------------
INTERNATIONAL STANDARD ISO 7130:2013(E)
Earth-moving machinery — Operator training — Content
and methods
1 Scope
This International Standard provides a basis for content and methods used for operator training for
earth-moving machinery as defined in ISO 6165. The training in turn provides the basis for developing
operators of earth-moving machinery who are knowledgeable and understand the manufacturer’s
instructions for safe and proper operation and routine maintenance. It establishes criteria for evaluating
the competency of a person who operates and could perform routine maintenance of earth-moving
machinery, but does not specify any procedure for proficiency testing or assessment of the operator’s
competence of operating and maintaining earth-moving machinery. It is not intended to substitute for
national or regional requirements or regulations related to operator training.
2 Normative references
The following documents, in whole or in part, are normatively referenced in this document and are
indispensable for its application. For dated references, only the edition cited applies. For undated
references, the latest edition of the referenced document (including any amendments) applies.
ISO 6165, Earth-moving machinery — Basic types — Identification and terms and definitions
ISO 6405-1, Earth-moving machinery — Symbols for operator controls and other displays — Part 1:
Common symbols
ISO 6405-2, Earth-moving machinery — Symbols for operator controls and other displays — Part 2: Specific
symbols for machines, equipment and accessories
ISO 9244, Earth-moving machinery — Machine safety labels — General principles
3 Terms and definitions
For the purposes of this document, the terms and definitions given in ISO 6165 and the following apply.
3.1
operator
person who operates and could perform routine maintenance of earth-moving machinery
Note 1 to entry: “Routine” includes items as defined by the manufacturer, e.g. tyre pressure, fluid levels.
3.2
simulator
system that imitates the experience of operating an earth-moving machine
3.3
trainee
person receiving training
3.4
trainer
person qualified to instruct a trainee to properly operate and perform routine maintenance of earth-
moving machinery
© ISO 2013 – All rights reserved 1
---------------------- Page: 4
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.