ISO 1806:2002

Fishing nets — Determination of mesh breaking force of netting

ISO 1806:2002 specifies a method of determining the mesh-breaking force of netting for fishing. Tests may be carried out in both the dry and wet states, but tests in the wet state are considered to be particularly appropriate in indicating the behaviour of the netting in use.

Filets de pêche — Détermination de la force de rupture de la maille de nappe de filet

General Information

• Status: Published
• Publication Date: 26-Nov-2002
• ICS: 65.150 - Fishing and fish breeding
• Technical Committee: ISO/TC 38 - Textiles
• Drafting Committee: ISO/TC 38 - Textiles
• Current Stage: 9060 - Close of review
• Start Date: 04-Jun-2029

Relations

• Revises: ISO 1806:1973 - Fishing nets — Determination of mesh breaking load of netting
• Effective Date: 15-Apr-2008

Standards Content (Sample)

INTERNATIONAL ISO
STANDARD 1806
Second edition
2002-12-01


Fishing nets — Determination of mesh
breaking force of netting
Filets de pêche — Détermination de la force de rupture de la maille
de nappe de filet





Reference number
ISO 1806:2002(E)
©
 ISO 2002

---------------------- Page: 1 ----------------------
ISO 1806:2002(E)
PDF disclaimer
This PDF file may contain embedded typefaces. In accordance with Adobe's licensing policy, this file may be printed or viewed but shall not
be edited unless the typefaces which are embedded are licensed to and installed on the computer performing the editing. In downloading this
file, parties accept therein the responsibility of not infringing Adobe's licensing policy. The ISO Central Secretariat accepts no liability in this
area.
Adobe is a trademark of Adobe Systems Incorporated.
Details of the software products used to create this PDF file can be found in the General Info relative to the file; the PDF-creation parameters
were optimized for printing. Every care has been taken to ensure that the file is suitable for use by ISO member bodies. In the unlikely event
that a problem relating to it is found, please inform the Central Secretariat at the address given below.


©  ISO 2002
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or by any means, electronic
or mechanical, including photocopying and microfilm, without permission in writing from either ISO at the address below or ISO's member body
in the country of the requester.
ISO copyright office
Case postale 56 • CH-1211 Geneva 20
Tel. + 41 22 749 01 11
Fax + 41 22 749 09 47
E-mail [e-mail]
Web www.iso.ch
Printed in Switzerland

ii © ISO 2002 – All rights reserved

---------------------- Page: 2 ----------------------
ISO 1806:2002(E)
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies (ISO
member bodies). The work of preparing International Standards is normally carried out through ISO technical
committees. Each member body interested in a subject for which a technical committee has been established has
the right to be represented on that committee. International organizations, governmental and non-governmental, in
liaison with ISO, also take part in the work. ISO collaborates closely with the International Electrotechnical
Commission (IEC) on all matters of electrotechnical standardization.
International Standards are drafted in accordance with the rules given in the ISO/IEC Directives, Part 3.
The main task of technical committees is to prepare International Standards. Draft International Standards adopted
by the technical committees are circulated to the member bodies for voting. Publication as an International
Standard requires approval by at least 75 % of the member bodies casting a vote.
Attention is drawn to the possibility that some of the elements of this International Standard may be the subject of
patent rights. ISO shall not be held responsible for identifying any or all such patent rights.
ISO 1806 was prepared by the European Committee for Standardization (CEN) in collaboration with Technical
Committee ISO/TC 38, Textiles, in accordance with the Agreement on technical cooperation between ISO and
CEN (Vienna Agreement).
Throughout the text of this document, read ".this European Standard." to mean ".this International Standard.".
This second edition cancels and replaces the first edition (ISO 1806:1973), which has been technically revised.
© ISO 2002 – All rights reserved iii

---------------------- Page: 3 ----------------------
ISO 1806:2002(E)

Contents
page
Foreword.v
1 Scope .1
2 Normative references .1
3 Terms and definitions.1
4 Principle.1
5 Apparatus .2
6 Sampling.2
7 Preparation of samples .
...