ISO 15903:2002
(Main)Soil quality — Format for recording soil and site information
Soil quality — Format for recording soil and site information
The purpose of this International Standard is to achieve a high degree of harmonization in reporting results of on-site recording, sampling, on-site sample analyses and laboratory analyses of soil samples. To this end, it provides instructions for correctly specifying the quantities and units used to express results of analyses, the methods used and their precision. This International Standard also provides information to allow unique referencing of the sample, in both field and laboratory contexts, in order to ensure the traceability of the results.
Qualité du sol — Format d'enregistrement des données relatives aux sols et aux sites
La présente Norme internationale a pour objectif de permettre l'obtention d'un degré élevé d'harmonisation en matière de notation des résultats des enregistrements effectués sur site, des résultats d'échantillonnage, des analyses d'échantillons conduites sur site et de celles réalisées en laboratoire. À cette fin, elle fournit des instructions permettant de spécifier correctement les grandeurs et unités utilisées pour exprimer les résultats d'analyse, les méthodes employées et leur fidélité. Elle fournit également des informations permettant un référencement unique de l'échantillon, au laboratoire aussi bien que sur le terrain, afin de garantir la traçabilité des résultats.
Kakovost tal – Protokol za zapise o tleh in lokaciji
General Information
Buy Standard
Standards Content (Sample)
INTERNATIONAL ISO
STANDARD 15903
First edition
2002-09-01
Soil quality — Format for recording soil and
site information
Qualité du sol — Format d'enregistrement des données relatives aux sols et
aux sites
Reference number
ISO 15903:2002(E)
© ISO 2002
---------------------- Page: 1 ----------------------
ISO 15903:2002(E)
PDF disclaimer
This PDF file may contain embedded typefaces. In accordance with Adobe's licensing policy, this file may be printed or viewed but shall not be
edited unless the typefaces which are embedded are licensed to and installed on the computer performing the editing. In downloading this file,
parties accept therein the responsibility of not infringing Adobe's licensing policy. The ISO Central Secretariat accepts no liability in this area.
Adobe is a trademark of Adobe Systems Incorporated.
Details of the software products used to create this PDF file can be found in the General Info relative to the file; the PDF-creation parameters
were optimized for printing. Every care has been taken to ensure that the file is suitable for use by ISO member bodies. In the unlikely event
that a problem relating to it is found, please inform the Central Secretariat at the address given below.
© ISO 2002
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or by any means,
electronic or mechanical, including photocopying and microfilm, without permission in writing from either ISO at the address below or ISO's
member body in the country of the requester.
ISO copyright office
Case postale 56 CH-1211 Geneva 20
Tel. + 41 22 749 01 11
Fax + 41 22 749 09 47
E-mail copyright@iso.ch
Web www.iso.ch
Printed in Switzerland
©
ii ISO 2002 – All rights reserved
---------------------- Page: 2 ----------------------
ISO 15903:2002(E)
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies (ISO
member bodies). The work of preparing International Standards is normally carried out through ISO technical
committees. Each member body interested in a subject for which a technical committee has been established has
the right to be represented on that committee. International organizations, governmental and non-governmental, in
liaison with ISO, also take part in the work. ISO collaborates closely with the International Electrotechnical
Commission (IEC) on all matters of electrotechnical standardization.
International Standards are drafted in accordance with the rules given in the ISO/IEC Directives, Part 3.
Draft International Standards adopted by the technical committees are circulated to the member bodies for voting.
Publication as an International Standard requires approval by at least 75 % of the member bodies casting a vote.
Attention is drawn to the possibility that some of the elements of this International Standard may be the subject of
patent rights. ISO shall not be held responsible for identifying any or all such patent rights.
International Standard ISO 15903 was prepared by Technical Committee ISO/TC 190, Soil quality, Subcommittee
SC 1, Evaluation of criteria, terminology and codification.
©
ISO 2002 – All rights reserved iii
---------------------- Page: 3 ----------------------
ISO 15903:2002(E)
Introduction
In any system where soil data are handled, but particularly in determinations of soil quality and evaluations for soil
protection or sustainable uses of soil, it is essential that reliable and compatible information is obtained and recorded.
This information must enable the site to be clearly identified and located.
The documentation should include information collected about the nature of the site at the time of the site
investigation and the nature of sampling. Details on the sampling include the place, date and mode of sampling, the
size of the sample, whether single or composite and the storage and transportation conditions. In addition, details of
the sample preparation and of the results of test methods undertaken on the samples should be recorded.
Information should also be provided on the test methods used and their precision, as well as details of the laboratory
undertaking the test methods together with information about the laboratory's accreditation and involvement in
quality assurance schemes.
©
iv ISO 2002 – All rights reserved
---------------------- Page: 4 ----------------------
INTERNATIONAL STANDARD ISO 15903:2002(E)
Soil quality — Format for recording soil and site information
1 Scope
The purpose of this International Standard is to achieve a high degree of harmonization in reporting results of on-site
recording, sampling, on-site sample analyses and laboratory analyses of soil samples. To this end, it provides
instructions for correctly specifying the quantities and units used to express results of analyses, the methods used
and their precision. This International Standard also provides information to allow unique referencing of the sample,
in both field and laboratory contexts, in order to ensure the traceability of the results.
2 Normative references
The following normative documents contain provisions which, through reference in this text, constitute provisions of
this International Standard. For dated references, subsequent amendments to, or revisions of, any of these
publications do not apply. However, parties to agreements based on this International Standard are encouraged to
investigate the possibility of applying the most recent editions of the normative documents indicated below. For
undated references, the latest edition of the normative document referred to applies. Members of ISO and IEC
maintain registers of currently valid International Standards.
ISO 11074-1, Soil quality — Vocabulary — Part 1: Terms and definitions relating to the protection and pollution of the
soil
ISO 11074-2, Soil quality — Vocabulary — Part 2: Terms and definitions relating to sampling
3 Terms and definitions
For the purposes of this International Standard, terms and definitions given in ISO 11074-1 and ISO 11074-2 apply.
4Preamble
Given the large amount of data which result from site investigation, sampling, analysis of physical, chemical and
biological properties of the sample and in the future evaluation of the risks to particular targets or particular land
uses, it is essential that these data be recorded systematically. This approach will generate the basis of a codified
information system for soil quality investigations. These data are most appropriately stored in a Geographical
Information System (GIS).
5 List of parameters
5.1 General
The range of parameters which can be recorded as a result of observations of on-site characteristics, on-site
analysis and laboratory analysis of soil samples is large. It may be necessary to produce subsets of parameter
listings, de
...
SLOVENSKI STANDARD
SIST ISO 15903:2006
01-december-2006
Kakovost tal – Protokol za zapise o tleh in lokaciji
Soil quality -- Format for recording soil and site information
Qualité du sol -- Format d'enregistrement des données relatives aux sols et aux sites
Ta slovenski standard je istoveten z: ISO 15903:2002
ICS:
13.080.01 Kakovost tal in pedologija na Soil quality and pedology in
splošno general
SIST ISO 15903:2006 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
SIST ISO 15903:2006
---------------------- Page: 2 ----------------------
SIST ISO 15903:2006
INTERNATIONAL ISO
STANDARD 15903
First edition
2002-09-01
Soil quality — Format for recording soil and
site information
Qualité du sol — Format d'enregistrement des données relatives aux sols et
aux sites
Reference number
ISO 15903:2002(E)
© ISO 2002
---------------------- Page: 3 ----------------------
SIST ISO 15903:2006
ISO 15903:2002(E)
PDF disclaimer
This PDF file may contain embedded typefaces. In accordance with Adobe's licensing policy, this file may be printed or viewed but shall not be
edited unless the typefaces which are embedded are licensed to and installed on the computer performing the editing. In downloading this file,
parties accept therein the responsibility of not infringing Adobe's licensing policy. The ISO Central Secretariat accepts no liability in this area.
Adobe is a trademark of Adobe Systems Incorporated.
Details of the software products used to create this PDF file can be found in the General Info relative to the file; the PDF-creation parameters
were optimized for printing. Every care has been taken to ensure that the file is suitable for use by ISO member bodies. In the unlikely event
that a problem relating to it is found, please inform the Central Secretariat at the address given below.
© ISO 2002
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or by any means,
electronic or mechanical, including photocopying and microfilm, without permission in writing from either ISO at the address below or ISO's
member body in the country of the requester.
ISO copyright office
Case postale 56 CH-1211 Geneva 20
Tel. + 41 22 749 01 11
Fax + 41 22 749 09 47
E-mail copyright@iso.ch
Web www.iso.ch
Printed in Switzerland
©
ii ISO 2002 – All rights reserved
---------------------- Page: 4 ----------------------
SIST ISO 15903:2006
ISO 15903:2002(E)
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies (ISO
member bodies). The work of preparing International Standards is normally carried out through ISO technical
committees. Each member body interested in a subject for which a technical committee has been established has
the right to be represented on that committee. International organizations, governmental and non-governmental, in
liaison with ISO, also take part in the work. ISO collaborates closely with the International Electrotechnical
Commission (IEC) on all matters of electrotechnical standardization.
International Standards are drafted in accordance with the rules given in the ISO/IEC Directives, Part 3.
Draft International Standards adopted by the technical committees are circulated to the member bodies for voting.
Publication as an International Standard requires approval by at least 75 % of the member bodies casting a vote.
Attention is drawn to the possibility that some of the elements of this International Standard may be the subject of
patent rights. ISO shall not be held responsible for identifying any or all such patent rights.
International Standard ISO 15903 was prepared by Technical Committee ISO/TC 190, Soil quality, Subcommittee
SC 1, Evaluation of criteria, terminology and codification.
©
ISO 2002 – All rights reserved iii
---------------------- Page: 5 ----------------------
SIST ISO 15903:2006
ISO 15903:2002(E)
Introduction
In any system where soil data are handled, but particularly in determinations of soil quality and evaluations for soil
protection or sustainable uses of soil, it is essential that reliable and compatible information is obtained and recorded.
This information must enable the site to be clearly identified and located.
The documentation should include information collected about the nature of the site at the time of the site
investigation and the nature of sampling. Details on the sampling include the place, date and mode of sampling, the
size of the sample, whether single or composite and the storage and transportation conditions. In addition, details of
the sample preparation and of the results of test methods undertaken on the samples should be recorded.
Information should also be provided on the test methods used and their precision, as well as details of the laboratory
undertaking the test methods together with information about the laboratory's accreditation and involvement in
quality assurance schemes.
©
iv ISO 2002 – All rights reserved
---------------------- Page: 6 ----------------------
SIST ISO 15903:2006
INTERNATIONAL STANDARD ISO 15903:2002(E)
Soil quality — Format for recording soil and site information
1 Scope
The purpose of this International Standard is to achieve a high degree of harmonization in reporting results of on-site
recording, sampling, on-site sample analyses and laboratory analyses of soil samples. To this end, it provides
instructions for correctly specifying the quantities and units used to express results of analyses, the methods used
and their precision. This International Standard also provides information to allow unique referencing of the sample,
in both field and laboratory contexts, in order to ensure the traceability of the results.
2 Normative references
The following normative documents contain provisions which, through reference in this text, constitute provisions of
this International Standard. For dated references, subsequent amendments to, or revisions of, any of these
publications do not apply. However, parties to agreements based on this International Standard are encouraged to
investigate the possibility of applying the most recent editions of the normative documents indicated below. For
undated references, the latest edition of the normative document referred to applies. Members of ISO and IEC
maintain registers of currently valid International Standards.
ISO 11074-1, Soil quality — Vocabulary — Part 1: Terms and definitions relating to the protection and pollution of the
soil
ISO 11074-2, Soil quality — Vocabulary — Part 2: Terms and definitions relating to sampling
3 Terms and definitions
For the purposes of this International Standard, terms and definitions given in ISO 11074-1 and ISO 11074-2 apply.
4Preamble
Given the large amount of data which result from site investigation, sampling, analysis of physical, chemical and
biological properties of the sample and in the future evaluation of the risks to particular targets or particular land
uses, it is essential that these data be recorded systematically. This approach will generate the basis
...
SLOVENSKI STANDARD
SIST ISO 15903:2006
01-december-2006
Kakovost tal – Protokol za zapise o tleh in lokaciji
Soil quality -- Format for recording soil and site information
Qualité du sol -- Format d'enregistrement des données relatives aux sols et aux sites
Ta slovenski standard je istoveten z: ISO 15903:2002
ICS:
13.080.01 Kakovost tal in pedologija na Soil quality and pedology in
splošno general
SIST ISO 15903:2006 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
SIST ISO 15903:2006
---------------------- Page: 2 ----------------------
SIST ISO 15903:2006
INTERNATIONAL ISO
STANDARD 15903
First edition
2002-09-01
Soil quality — Format for recording soil and
site information
Qualité du sol — Format d'enregistrement des données relatives aux sols et
aux sites
Reference number
ISO 15903:2002(E)
© ISO 2002
---------------------- Page: 3 ----------------------
SIST ISO 15903:2006
ISO 15903:2002(E)
PDF disclaimer
This PDF file may contain embedded typefaces. In accordance with Adobe's licensing policy, this file may be printed or viewed but shall not be
edited unless the typefaces which are embedded are licensed to and installed on the computer performing the editing. In downloading this file,
parties accept therein the responsibility of not infringing Adobe's licensing policy. The ISO Central Secretariat accepts no liability in this area.
Adobe is a trademark of Adobe Systems Incorporated.
Details of the software products used to create this PDF file can be found in the General Info relative to the file; the PDF-creation parameters
were optimized for printing. Every care has been taken to ensure that the file is suitable for use by ISO member bodies. In the unlikely event
that a problem relating to it is found, please inform the Central Secretariat at the address given below.
© ISO 2002
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or by any means,
electronic or mechanical, including photocopying and microfilm, without permission in writing from either ISO at the address below or ISO's
member body in the country of the requester.
ISO copyright office
Case postale 56 CH-1211 Geneva 20
Tel. + 41 22 749 01 11
Fax + 41 22 749 09 47
E-mail copyright@iso.ch
Web www.iso.ch
Printed in Switzerland
©
ii ISO 2002 – All rights reserved
---------------------- Page: 4 ----------------------
SIST ISO 15903:2006
ISO 15903:2002(E)
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies (ISO
member bodies). The work of preparing International Standards is normally carried out through ISO technical
committees. Each member body interested in a subject for which a technical committee has been established has
the right to be represented on that committee. International organizations, governmental and non-governmental, in
liaison with ISO, also take part in the work. ISO collaborates closely with the International Electrotechnical
Commission (IEC) on all matters of electrotechnical standardization.
International Standards are drafted in accordance with the rules given in the ISO/IEC Directives, Part 3.
Draft International Standards adopted by the technical committees are circulated to the member bodies for voting.
Publication as an International Standard requires approval by at least 75 % of the member bodies casting a vote.
Attention is drawn to the possibility that some of the elements of this International Standard may be the subject of
patent rights. ISO shall not be held responsible for identifying any or all such patent rights.
International Standard ISO 15903 was prepared by Technical Committee ISO/TC 190, Soil quality, Subcommittee
SC 1, Evaluation of criteria, terminology and codification.
©
ISO 2002 – All rights reserved iii
---------------------- Page: 5 ----------------------
SIST ISO 15903:2006
ISO 15903:2002(E)
Introduction
In any system where soil data are handled, but particularly in determinations of soil quality and evaluations for soil
protection or sustainable uses of soil, it is essential that reliable and compatible information is obtained and recorded.
This information must enable the site to be clearly identified and located.
The documentation should include information collected about the nature of the site at the time of the site
investigation and the nature of sampling. Details on the sampling include the place, date and mode of sampling, the
size of the sample, whether single or composite and the storage and transportation conditions. In addition, details of
the sample preparation and of the results of test methods undertaken on the samples should be recorded.
Information should also be provided on the test methods used and their precision, as well as details of the laboratory
undertaking the test methods together with information about the laboratory's accreditation and involvement in
quality assurance schemes.
©
iv ISO 2002 – All rights reserved
---------------------- Page: 6 ----------------------
SIST ISO 15903:2006
INTERNATIONAL STANDARD ISO 15903:2002(E)
Soil quality — Format for recording soil and site information
1 Scope
The purpose of this International Standard is to achieve a high degree of harmonization in reporting results of on-site
recording, sampling, on-site sample analyses and laboratory analyses of soil samples. To this end, it provides
instructions for correctly specifying the quantities and units used to express results of analyses, the methods used
and their precision. This International Standard also provides information to allow unique referencing of the sample,
in both field and laboratory contexts, in order to ensure the traceability of the results.
2 Normative references
The following normative documents contain provisions which, through reference in this text, constitute provisions of
this International Standard. For dated references, subsequent amendments to, or revisions of, any of these
publications do not apply. However, parties to agreements based on this International Standard are encouraged to
investigate the possibility of applying the most recent editions of the normative documents indicated below. For
undated references, the latest edition of the normative document referred to applies. Members of ISO and IEC
maintain registers of currently valid International Standards.
ISO 11074-1, Soil quality — Vocabulary — Part 1: Terms and definitions relating to the protection and pollution of the
soil
ISO 11074-2, Soil quality — Vocabulary — Part 2: Terms and definitions relating to sampling
3 Terms and definitions
For the purposes of this International Standard, terms and definitions given in ISO 11074-1 and ISO 11074-2 apply.
4Preamble
Given the large amount of data which result from site investigation, sampling, analysis of physical, chemical and
biological properties of the sample and in the future evaluation of the risks to particular targets or particular land
uses, it is essential that these data be recorded systematically. This approach will generate the basi
...
NORME ISO
INTERNATIONALE 15903
Première édition
2002-09-01
Qualité du sol — Format d'enregistrement
des données relatives aux sols et aux sites
Soil quality — Format for recording soil and site information
Numéro de référence
ISO 15903:2002(F)
© ISO 2002
---------------------- Page: 1 ----------------------
ISO 15903:2002(F)
PDF — Exonération de responsabilité
Le présent fichier PDF peut contenir des polices de caractères intégrées. Conformément aux conditions de licence d'Adobe, ce fichier peut
être imprimé ou visualisé, mais ne doit pas être modifié à moins que l'ordinateur employé à cet effet ne bénéficie d'une licence autorisant
l'utilisation de ces polices et que celles-ci y soient installées. Lors du téléchargement de ce fichier, les parties concernées acceptent de fait la
responsabilité de ne pas enfreindre les conditions de licence d'Adobe. Le Secrétariat central de l'ISO décline toute responsabilité en la
matière.
Adobe est une marque déposée d'Adobe Systems Incorporated.
Les détails relatifs aux produits logiciels utilisés pour la création du présent fichier PDF sont disponibles dans la rubrique General Info du
fichier; les paramètres de création PDF ont été optimisés pour l'impression. Toutes les mesures ont été prises pour garantir l'exploitation de
ce fichier par les comités membres de l'ISO. Dans le cas peu probable où surviendrait un problème d'utilisation, veuillez en informer le
Secrétariat central à l'adresse donnée ci-dessous.
© ISO 2002
Droits de reproduction réservés. Sauf prescription différente, aucune partie de cette publication ne peut être reproduite ni utilisée sous
quelque forme que ce soit et par aucun procédé, électronique ou mécanique, y compris la photocopie et les microfilms, sans l'accord écrit de
l'ISO à l'adresse ci-après ou au comité membre de l'ISO dans le pays du demandeur.
ISO copyright office
Case postale 56 CH-1211 Geneva 20
Tel. + 41 22 749 01 11
Fax + 41 22 749 09 47
E-mail copyright@iso.ch
Web www.iso.ch
Imprimé en Suisse
©
ii ISO 2002 – Tous droits réservés
---------------------- Page: 2 ----------------------
ISO 15903:2002(F)
Avant-propos
L'ISO (Organisation internationale de normalisation) est une fédération mondiale d'organismes nationaux de
normalisation (comités membres de l'ISO). L'élaboration des Normes internationales est en général confiée aux
comités techniques de l'ISO. Chaque comité membre intéressé par une étude a le droit de faire partie du comité
technique créé à cet effet. Les organisations internationales, gouvernementales et non gouvernementales, en liaison
avec l'ISO participent également aux travaux. L'ISO collabore étroitement avec la Commission électrotechnique
internationale (CEI) en ce qui concerne la normalisation électrotechnique.
Les Normes internationales sont rédigées conformément aux règles données dans les Directives ISO/CEI, Partie 3.
Les projets de Normes internationales adoptés par les comités techniques sont soumis aux comités membres pour
vote. Leur publication comme Normes internationales requiert l'approbation de 75 % au moins des comités membres
votants.
L'attention est appelée sur le fait que certains des éléments de la présente Norme internationale peuvent faire l'objet
de droits de propriété intellectuelle ou de droits analogues. L'ISO ne saurait être tenue pour responsable de ne pas
avoir identifié de tels droits de propriété et averti de leur existence.
La Norme internationale ISO 15903 a été élaborée par le comité technique ISO/TC 190, Qualité du sol, sous-comité
SC 1, Évaluation des critères, terminologie et codification.
©
ISO 2002 – Tous droits réservés iii
---------------------- Page: 3 ----------------------
ISO 15903:2002(F)
Introduction
Dans tout système traitant de données relatives aux sols, mais en particulier dans le cadre de déterminations de la
qualité du sol et d'évaluations pour la protection des sols ou des utilisations durables d'un sol, il est essentiel
d'obtenir et d'enregistrer des informations fiables et compatibles les unes avec les autres. Ces données doivent
permettre d'identifier clairement le site et de le localiser.
Il convient que la documentation comprenne les données recueillies sur la nature du site au moment des recherches
le concernant et sur le type d'échantillonnage. Les détails relatifs à l'échantillonnage comprendront le lieu, la date et
le mode d'échantillonnage, la taille de l'échantillon, une mention indiquant s'il s'agit d'un échantillon unitaire ou
composite, ainsi que les conditions de stockage et de transport. Il y a lieu, en outre, d’enregistrer des précisions
concernant la préparation des échantillons et les résultats des méthodes d'analyse utilisées. Il convient également
de fournir des informations sur les méthodes d'analyse utilisées et sur leur fidélité, avec des détails relatifs au
laboratoire mettant en œuvre ces méthodes, à son accréditation et à son engagement dans des programmes
d'assurance de la qualité.
©
iv ISO 2002 – Tous droits réservés
---------------------- Page: 4 ----------------------
NORME INTERNATIONALE ISO 15903:2002(F)
Qualité du sol — Format d'enregistrement des données relatives
aux sols et aux sites
1 Domaine d'application
La présente Norme internationale a pour objectif de permettre l'obtention d'un degré élevé d'harmonisation en
matière de notation des résultats des enregistrements effectués sur site, des résultats d'échantillonnage, des
analyses d'échantillons conduites sur site et de celles réalisées en laboratoire. À cette fin, elle fournit des instructions
permettant de spécifier correctement les grandeurs et unités utilisées pour exprimer les résultats d'analyse, les
méthodes employées et leur fidélité. Elle fournit également des informations permettant un référencement unique de
l'échantillon, au laboratoire aussi bien que sur le terrain, afin de garantir la traçabilité des résultats.
2Références normatives
Les documents normatifs suivants contiennent des dispositions qui, par suite de la référence qui y est faite,
constituent des dispositions valables pour la présente Norme internationale. Pour les références datées, les
amendements ultérieurs ou les révisions de ces publications ne s'appliquent pas. Toutefois, les parties prenantes
aux accords fondés sur la présente Norme internationale sont invitées à rechercher la possibilité d'appliquer les
éditions les plus récentes des documents normatifs indiqués ci-après. Pour les références non datées, la dernière
édition du document normatif en référence s'applique. Les membres de l'ISO et de la CEI possèdent le registre des
Normes internationales en vigueur.
ISO 11074-1, Qualité du sol — Vocabulaire — Partie 1: Termes et définitions relatifs à la protection et à la pollution
du sol
ISO 11074-2, Qualité du sol — Vocabulaire — Partie 2: Termes et définitions relatifs à l'échantillonnage
3 Termes et définitions
Pour les besoins de la présente Norme internationale, les termes et définitions donnés dans l'ISO 11074-1 et dans
l’ISO 11074-2 s'appliquent.
4Préambule
Étant donné la grande quantité de données résultant d'une étude de site, de l'échantillonnage, de l'analyse des
caractéristiques physiques, chimiques et biologiques de l'échantillon et de l'évaluation à venir des risques vis-à-vis
de cibles particulières ou d'utilisations spécifiques du terrain, il est essentiel d'enregistrer ces données de manière
systématique. Cette approche permettra de constituer la base d'un système d'information codifié relatif aux
investigations concernant la qualité des sols. Il est tout à fait judicieux de conserver ces données dans un Système
d'information géographique (SIG).
5 Paramètres
5.1 Généralités
L'éventail des paramètres susceptibles d'être enregistrés suite à l'observation des caractéristiques sur site et des
analyses d'échantillons de sol effectuées sur le site ou en laboratoire est large. Il peut se révéler nécessaire de
©
ISO 2002 – Tous droits réservés 1
---------------------- Page: 5 ----------------------
ISO 15903:2002(F)
constituer des sous-ensembles de paramèt
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.