EN ISO 16133:2018

Soil quality - Guidance on the establishment and maintenance of monitoring programmes (ISO 16133:2018)

This document gives general guidance on the selection of procedures for the establishment and maintenance of programmes for long-term monitoring of soil quality. It takes into account the large number of objectives for soil-monitoring programmes.
This document is intended to help provide a basis for dialogue between parties which might be involved in a monitoring scheme.

Bodenbeschaffenheit - Leitfaden zur Einrichtung und zum Betrieb von Beobachtungsprogrammen (ISO 16133:2018)

Dieses Dokument enthält einen Leitfaden für die Auswahl von Verfahren für die Einrichtung und den Betrieb von Dauerbeobachtungsprogrammen der Bodenbeschaffenheit. Berücksichtigt werden die zahlreichen Zielstellungen für Bodenbeobachtungsprogramme.
Mit diesem Dokument ist beabsichtigt, eine Hilfestellung für einen Austausch von Informationen zwischen den Beteiligten zu bieten, die in ein Beobachtungsprogramm eingebunden sein können.

Qualité du sol - Lignes directrices pour l'établissement et l'entretien de programmes de surveillance (ISO 16133:2018)

Le présent document fournit des recommandations relatives à la sélection de modes opératoires visant à établir et entretenir des programmes de surveillance de la qualité du sol à long terme. Il tient compte des nombreux objectifs des programmes de surveillance du sol.
Le présent document a pour but de contribuer à l'instauration d'une base de dialogue entre les parties susceptibles d'être impliquées dans un système de surveillance.

Kakovost tal - Navodilo za vzpostavitev in vzdrževanje programov monitoringa (ISO 16133:2018)

Ta dokument podaja splošne smernice za izbiro postopkov vzpostavljanja in vzdrževanja programov za dolgoročno spremljanje kakovosti tal. Upošteva veliko število ciljev, ki jih imajo programi spremljanja tal.
Namen tega dokumenta je pomagati zagotoviti podlago za dialog med strankami, ki bi lahko bile vključene v shemo spremljanja.

General Information

• Status: Published
• Publication Date: 18-Dec-2018
• ICS: 13.080.01 - Soil quality and pedology in general
• Technical Committee: CEN/TC 444 - Environmental characterization
• Drafting Committee: CEN/TC 444/WG 8 - Assessment
• Current Stage: 6060 - Definitive text made available (DAV) - Publishing
• Start Date: 19-Dec-2018
• Completion Date: 19-Dec-2018
• Ref Project: SIST EN ISO 16133:2019 - Soil quality - Guidance on the establishment and maintenance of monitoring programmes (ISO 16133:2018)

Relations

• Replaces: EN ISO 16133:2011 - Soil quality - Guidance on the establishment and maintenance of monitoring programmes (ISO 16133:2004)
• Effective Date: 21-Jan-2015

Standards Content (Sample)

SLOVENSKI STANDARD
01-marec-2019
1DGRPHãþD
SIST EN ISO 16133:2011
SIST ISO 16133:2006
Kakovost tal - Navodilo za vzpostavitev in vzdrževanje programov monitoringa
(ISO 16133:2018)
Soil quality - Guidance on the establishment and maintenance of monitoring programmes
(ISO 16133:2018)
Bodenbeschaffenheit - Leitfaden zur Einrichtung und zum Betrieb von
Beobachtungsprogrammen (ISO 16133:2018)
Qualité du sol - Lignes directrices pour l'établissement et l'entretien de programmes de
surveillance (ISO 16133:2018)
Ta slovenski standard je istoveten z: EN ISO 16133:2018
ICS:
13.080.05 Preiskava tal na splošno Examination of soils in
general
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

EN ISO 16133
EUROPEAN STANDARD
NORME EUROPÉENNE
December 2018
EUROPÄISCHE NORM
ICS 13.080.01 Supersedes EN ISO 16133:2011
English Version
Soil quality - Guidance on the establishment and
maintenance of monitoring programmes (ISO
16133:2018)
Qualité du sol - Lignes directrices pour l'établissement Bodenbeschaffenheit - Leitfaden zur Einrichtung und
et l'entretien de programmes de surveillance (ISO zum Betrieb von Beobachtungsprogrammen (ISO
16133:2018) 16133:2018)
This European Standard was approved by CEN on 8 December 2018.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,
Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2018 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 16133:2018 E
worldwide for CEN national Members.

Contents Page
European foreword . 3

European foreword
This document (EN ISO 16133:2018) has been prepared by Technical Committee ISO/TC 190 "Soil
quality" in collaboration with Technical Committee CEN/TC 345 “Characterization of soils” the
secretariat of which is held by NEN.
This European Standard shall be given the status of a national standard, either by publication of an
identical text or by endorsement, at the latest by June 2019, and conflicting national standards shall be
withdrawn at the latest by June 2019.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN shall not be held responsible for identifying any or all such patent rights.
This document supersedes EN ISO 16133:2011.
According to the CEN-CENELEC Internal Regulations, the national standards organizations of the
following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria,
Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia,
France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta,
Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and the United Kingdom.
Endorsement notice
The text of ISO 16133:2018 has been approved by CEN as EN ISO 16133:2018 without any modification.

INTERNATIONAL ISO
STANDARD 16133
Second edition
2018-12
Soil quality — Guidance on the
establishment and maintenance of
monitoring programmes
Qualité du sol — Lignes directrices pour l'établissement et l'entretien
de programmes de surveillance
Reference number
ISO 16133:2018(E)
©
ISO 2018
ISO 16133:2018(E)
© ISO 2018
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may
be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting
on the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address
below or ISO’s member body in the country of the requester.
ISO copyright office
CP 401 • Ch. de Blandonnet 8
CH-1214 Vernier, Geneva
Phone: [phone]
Fax: [phone]
Email: [e-mail]
Website: www.iso.org
Published in Switzerland
ii © ISO 2018 – All rights reserved

ISO 16133:2018(E)
Contents Page
Foreword .iv
Introduction .v
1 Scope . 1
2 Normative references . 1
3 Terms and definitions . 1
4 Monitoring objectives . 2
4.1 General . 2
4.2 Examples of monitoring purposes . 2
5 Monitoring programme . 3
5.1 General considerations . 3
5.2 Elements of a monitoring programme . 4
5.2.1 Status of the monitoring sites . 4
5.2.2 Changes at the monitoring sites . 4
5.2.3 Interpretation of status and changes . 4
5.2.4 Statistical sampling design . 4
5.2.5 Selection of sites in space . 5
5.2.6 Resampling in time . 5
5.3 Sampling and measurement . 6
5.3.1 General. 6
5.3.2 Site design and identification. 6
5.3.3 Soil and site description . 6
5.3.4 Sampling. 6
5.3.5 Field and laboratory measurements. 6
5.3.6 Specimen banking . 6
5.3.7 Time interval between samplings . 7
6 Data quality and quantity. 7
Bibliography . 9
ISO 16133:2018(E)
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards
bodies (ISO member bodies). The work of preparing International Standards is normally carried out
through ISO technical committees. Each member body interested in a subject for which a technical
committee has been established has the right to be represented on that committee. International
organizations, governmental and non-governmental, in liaison with ISO, also take part in the work.
ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of
electrotechnical standardization.
The procedures used to develop this document and those intended for its further maintenance are
described in the ISO/IEC Directives, Part 1. In particular the different approval criteria needed for the
different types of ISO documents should be noted. This document was drafted in accordance with the
editorial rules of the ISO/IEC Directives, Part 2 (see www .iso .org/directives).
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. ISO shall not be held responsible for identifying any or all such patent rights. Details of
any patent rights identified during the development of the document will be in the Introduction and/or
on the ISO list of patent declarations received (see www .iso .org/patents).
Any trade name used in this document is information given for the convenience of users and does not
constitute an endorsement.
For an explanation on the voluntary nature of standards, the meaning of ISO specific terms and
expressions related to conformity assessment, as well as information about ISO's adherence to the
World Trade Organization (WTO) principles in the Technical Barriers to Trade (TBT) see the following
URL: www .iso .org/iso/foreword .html.
This document was prepared by Technical Committee ISO/TC 190, Soil quality, Subcommittee SC 7,
Impact assessment.
Any feedback or questions on this document should be directed to the user’s national standards body. A
complete listing of these bodies can be found at www .iso .org/members .html.
This second edition cancels and replaces the first edition (ISO 16133:2004), which has been technically
revised. The main changes compared to the previous edition are as follows:
— Clause 2 has been updated;
— Clause 3 has been updated, definitions that were not used in the document have been deleted;
— new subclauses have been introduced regarding sampling designs (5.2.4), sampling in space (5.2.5)
and in time (5.2.6);
— all examples of monitoring programmes described in Annex A have been deleted as part were
outdated.
iv © ISO 2018 – All rights reserved

ISO 16133:2018(E)
Introduction
Monitoring is the process of repetitive observation, for defined purposes, of one or more components
of the environment according to pre-arranged schedules in space and time using comparable methods
[14][15]
for environmental sensing and data collection . Monitoring schemes are used all over the world
for a large number of purposes. Soil monitoring, particularly, is a long-term undertaking. The quality
and the utility of the information from the monitoring is to a large degree determined by the choice
of monitoring sites and by their maintenance over the years, and by appropriate quality control at all
stages of the process.
Monitoring associated with industrial
...