Paints and varnishes — Electro-deposition coatings — Part 14: Deposition behaviour

This document specifies a method for determining the deposition behaviour of an electro-deposition coating (e-coat) on various substrates and with various pre-treatments. It applies to electro-deposition coatings for automotive industries and other general industrial applications, e.g. chiller units, consumer products, radiators, aerospace, agriculture.

Peintures et vernis — Peintures d'électrodéposition — Partie 14: Comportement de dépôt

Le présent document spécifie une méthode de détermination du comportement de dépôt d'une peinture d'électrodéposition (e-coat) sur différents supports et avec différents prétraitements. Il s'applique aux peintures d'électrodéposition destinées aux industries automobiles et autres applications industrielles générales, par exemple unités frigorifiques, biens de consommation, radiateurs, aérospatiale, agriculture.

General Information

Status
Published
Publication Date
08-Mar-2021
Current Stage
6060 - International Standard published
Start Date
09-Mar-2021
Due Date
03-Oct-2022
Completion Date
09-Mar-2021
Ref Project

Buy Standard

Standard
ISO 22553-14:2021 - Paints and varnishes -- Electro-deposition coatings
English language
5 pages
sale 15% off
Preview
sale 15% off
Preview
Standard
ISO 22553-14:2021 - Peintures et vernis -- Peintures d'électrodéposition
French language
5 pages
sale 15% off
Preview
sale 15% off
Preview
Draft
ISO/PRF 22553-14:Version 16-jan-2021 - Paints and varnishes -- Electro-deposition coatings
English language
5 pages
sale 15% off
Preview
sale 15% off
Preview

Standards Content (Sample)

INTERNATIONAL ISO
STANDARD 22553-14
First edition
2021-03
Paints and varnishes — Electro-
deposition coatings —
Part 14:
Deposition behaviour
Peintures et vernis — Peintures d'électrodéposition —
Partie 14: Comportement de précipitation
Reference number
ISO 22553-14:2021(E)
©
ISO 2021

---------------------- Page: 1 ----------------------
ISO 22553-14:2021(E)

COPYRIGHT PROTECTED DOCUMENT
© ISO 2021
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may
be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting
on the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address
below or ISO’s member body in the country of the requester.
ISO copyright office
CP 401 • Ch. de Blandonnet 8
CH-1214 Vernier, Geneva
Phone: +41 22 749 01 11
Email: copyright@iso.org
Website: www.iso.org
Published in Switzerland
ii © ISO 2021 – All rights reserved

---------------------- Page: 2 ----------------------
ISO 22553-14:2021(E)

Contents Page
Foreword .iv
1 Scope . 1
2 Normative references . 1
3 Terms and definitions . 1
4 Principle . 1
5 Apparatus and test equipment . 1
6 Test panels . 2
7 Number of determinations . 2
8 Procedure. 3
9 Evaluation . 4
10 Precision . 5
11 Test report . 5
© ISO 2021 – All rights reserved iii

---------------------- Page: 3 ----------------------
ISO 22553-14:2021(E)

Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards
bodies (ISO member bodies). The work of preparing International Standards is normally carried out
through ISO technical committees. Each member body interested in a subject for which a technical
committee has been established has the right to be represented on that committee. International
organizations, governmental and non-governmental, in liaison with ISO, also take part in the work.
ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of
electrotechnical standardization.
The procedures used to develop this document and those intended for its further maintenance are
described in the ISO/IEC Directives, Part 1. In particular, the different approval criteria needed for the
different types of ISO documents should be noted. This document was drafted in accordance with the
editorial rules of the ISO/IEC Directives, Part 2 (see www .iso .org/ directives).
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. ISO shall not be held responsible for identifying any or all such patent rights. Details of
any patent rights identified during the development of the document will be in the Introduction and/or
on the ISO list of patent declarations received (see www .iso .org/ patents).
Any trade name used in this document is information given for the convenience of users and does not
constitute an endorsement.
For an explanation of the voluntary nature of standards, the meaning of ISO specific terms and
expressions related to conformity assessment, as well as information about ISO's adherence to the
World Trade Organization (WTO) principles in the Technical Barriers to Trade (TBT), see www .iso .org/
iso/ foreword .html.
This document was prepared by Technical Committee ISO/TC 35, Paints and varnishes, Subcommittee
SC 9, General test methods for paints and varnishes.
A list of all parts in the ISO 22553 series can be found on the ISO website.
Any feedback or questions on this document should be directed to the user’s national standards body. A
complete listing of these bodies can be found at www .iso .org/ members .html.
iv © ISO 2021 – All rights reserved

---------------------- Page: 4 ----------------------
INTERNATIONAL STANDARD ISO 22553-14:2021(E)
Paints and varnishes — Electro-deposition coatings —
Part 14:
Deposition behaviour
1 Scope
This document specifies a method for determining the deposition behaviour of an electro-deposition
coating (e-coat) on various substrates and with various pre-treatments.
It applies to electro-deposition coatings for automotive industries and other general industrial
applications, e.g. chiller units, consumer products, radiators, aerospace, agriculture.
2 Norma
...

NORME ISO
INTERNATIONALE 22553-14
Première édition
2021-03
Peintures et vernis — Peintures
d'électrodéposition —
Partie 14:
Comportement de dépôt
Paints and varnishes — Electro-deposition coatings —
Part 14: Deposition behaviour
Numéro de référence
ISO 22553-14:2021(F)
© ISO 2021

---------------------- Page: 1 ----------------------
ISO 22553-14:2021(F)
DOCUMENT PROTÉGÉ PAR COPYRIGHT
© ISO 2021
Tous droits réservés. Sauf prescription différente ou nécessité dans le contexte de sa mise en œuvre, aucune partie de cette
publication ne peut être reproduite ni utilisée sous quelque forme que ce soit et par aucun procédé, électronique ou mécanique,
y compris la photocopie, ou la diffusion sur l’internet ou sur un intranet, sans autorisation écrite préalable. Une autorisation peut
être demandée à l’ISO à l’adresse ci-après ou au comité membre de l’ISO dans le pays du demandeur.
ISO copyright office
Case postale 401 • Ch. de Blandonnet 8
CH-1214 Vernier, Genève
Tél.: +41 22 749 01 11
E-mail: copyright@iso.org
Web: www.iso.org
Publié en Suisse
ii
  © ISO 2021 – Tous droits réservés

---------------------- Page: 2 ----------------------
ISO 22553-14:2021(F)
Sommaire Page
Avant-propos .iv
1 Domaine d'application .1
2 Références normatives .1
3 Termes et définitions . 1
4 Principe. 1
5 Appareillage et équipement d'essai . 2
6 Panneaux d'essai . 2
7 Nombre de déterminations . .3
8 Mode opératoire . 3
9 Évaluation . 4
10 Fidélité . 5
11 Rapport d'essai . 5
iii
© ISO 2021 – Tous droits réservés

---------------------- Page: 3 ----------------------
ISO 22553-14:2021(F)
Avant-propos
L'ISO (Organisation internationale de normalisation) est une fédération mondiale d'organismes
nationaux de normalisation (comités membres de l'ISO). L'élaboration des Normes internationales est
en général confiée aux comités techniques de l'ISO. Chaque comité membre intéressé par une étude
a le droit de faire partie du comité technique créé à cet effet. Les organisations internationales,
gouvernementales et non gouvernementales, en liaison avec l'ISO participent également aux travaux.
L'ISO collabore étroitement avec la Commission électrotechnique internationale (IEC) en ce qui
concerne la normalisation électrotechnique.
Les procédures utilisées pour élaborer le présent document et celles destinées à sa mise à jour sont
décrites dans les Directives ISO/IEC, Partie 1. Il convient, en particulier, de prendre note des différents
critères d'approbation requis pour les différents types de documents ISO. Le présent document a
été rédigé conformément aux règles de rédaction données dans les Directives ISO/IEC, Partie 2 (voir
www.iso.org/directives).
L'attention est attirée sur le fait que certains des éléments du présent document peuvent faire l'objet de
droits de propriété intellectuelle ou de droits analogues. L'ISO ne saurait être tenue pour responsable
de ne pas avoir identifié de tels droits de propriété et averti de leur existence. Les détails concernant
les références aux droits de propriété intellectuelle ou autres droits analogues identifiés lors de
l'élaboration du document sont indiqués dans l'Introduction et/ou dans la liste des déclarations de
brevets reçues par l'ISO (voir www.iso.org/brevets).
Les appellations commerciales éventuellement mentionnées dans le présent document sont données
pour information, par souci de commodité, à l’intention des utilisateurs et ne sauraient constituer un
engagement.
Pour une explication de la nature volontaire des normes, la signification des termes et expressions
spécifiques de l'ISO liés à l'évaluation de la conformité, ou pour toute information au sujet de l'adhésion
de l'ISO aux principes de l’Organisation mondiale du commerce (OMC) concernant les obstacles
techniques au commerce (OTC), voir www.iso.org/avant-propos.
Le présent document a été élaboré par le comité technique ISO/TC 35, Peintures et vernis, sous-comité
SC 9, Méthodes générales d'essais des peintures et vernis.
Une liste de toutes les parties de la série ISO 22553 se trouve sur le site web de l'ISO.
Il convient que l’utilisateur adresse tout retour d’information ou toute question concernant le présent
document à l’organisme national de normalisation de son pays. Une liste exhaustive desdits organismes
se trouve à l’adresse www.iso.org/members.html.
iv
  © ISO 2021 – Tous droits réservés

---------------------- Page: 4 ----------------------
NORME INTERNATIONALE ISO 22553-14:2021(F)
Peintures et vernis — Peintures d'électrodéposition —
Partie 14:
Comportement de dépôt
1 Domaine d'application
Le présent document spécifie une méthode de détermination du comportement de dépôt d'une peinture
d'électrodéposition (e-coat) sur différents supports et avec différents prétraitements.
Il s'applique aux peintures d'électrodéposition destinées aux industries automobiles et autres
applications industrielles générales, par exemple unités frigorifiques, biens de consommation,
radiateurs, aérospatiale, agriculture.
2 Références normatives
Les documents suivants sont cités dans le texte de sorte qu’ils constituent, pour tout ou par
...

INTERNATIONAL ISO
STANDARD 22553-14
First edition
Paints and varnishes — Electro-
deposition coatings —
Part 14:
Deposition behaviour
Peintures et vernis — Peintures d'électrodéposition —
Partie 14: Comportement de précipitation
PROOF/ÉPREUVE
Reference number
ISO 22553-14:2021(E)
©
ISO 2021

---------------------- Page: 1 ----------------------
ISO 22553-14:2021(E)

COPYRIGHT PROTECTED DOCUMENT
© ISO 2021
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may
be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting
on the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address
below or ISO’s member body in the country of the requester.
ISO copyright office
CP 401 • Ch. de Blandonnet 8
CH-1214 Vernier, Geneva
Phone: +41 22 749 01 11
Email: copyright@iso.org
Website: www.iso.org
Published in Switzerland
ii PROOF/ÉPREUVE © ISO 2021 – All rights reserved

---------------------- Page: 2 ----------------------
ISO 22553-14:2021(E)

Contents Page
Foreword .iv
1 Scope . 1
2 Normative references . 1
3 Terms and definitions . 1
4 Principle . 1
5 Apparatus and test equipment . 1
6 Test panels . 2
7 Number of determinations . 2
8 Procedure. 3
9 Evaluation . 4
10 Precision . 5
11 Test report . 5
© ISO 2021 – All rights reserved PROOF/ÉPREUVE iii

---------------------- Page: 3 ----------------------
ISO 22553-14:2021(E)

Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards
bodies (ISO member bodies). The work of preparing International Standards is normally carried out
through ISO technical committees. Each member body interested in a subject for which a technical
committee has been established has the right to be represented on that committee. International
organizations, governmental and non-governmental, in liaison with ISO, also take part in the work.
ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of
electrotechnical standardization.
The procedures used to develop this document and those intended for its further maintenance are
described in the ISO/IEC Directives, Part 1. In particular, the different approval criteria needed for the
different types of ISO documents should be noted. This document was drafted in accordance with the
editorial rules of the ISO/IEC Directives, Part 2 (see www .iso .org/ directives).
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. ISO shall not be held responsible for identifying any or all such patent rights. Details of
any patent rights identified during the development of the document will be in the Introduction and/or
on the ISO list of patent declarations received (see www .iso .org/ patents).
Any trade name used in this document is information given for the convenience of users and does not
constitute an endorsement.
For an explanation of the voluntary nature of standards, the meaning of ISO specific terms and
expressions related to conformity assessment, as well as information about ISO's adherence to the
World Trade Organization (WTO) principles in the Technical Barriers to Trade (TBT), see www .iso .org/
iso/ foreword .html.
This document was prepared by Technical Committee ISO/TC 35, Paints and varnishes, Subcommittee
SC 9, General test methods for paints and varnishes.
A list of all parts in the ISO 22553 series can be found on the ISO website.
Any feedback or questions on this document should be directed to the user’s national standards body. A
complete listing of these bodies can be found at www .iso .org/ members .html.
iv PROOF/ÉPREUVE © ISO 2021 – All rights reserved

---------------------- Page: 4 ----------------------
INTERNATIONAL STANDARD ISO 22553-14:2021(E)
Paints and varnishes — Electro-deposition coatings —
Part 14:
Deposition behaviour
1 Scope
This document specifies a method for determining the deposition behaviour of an electro-deposition
coating (e-coat) on various substrates and with various pre-treatments.
It applies to electro-deposition coatings for automotive industries and other general industrial
applications, e.g. chiller units, consumer products, radiators, aerospace, agriculture.
2 Normative references
Th
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.