Nickel alloys — Flame atomic absorption spectrometric analysis — Part 2: Determination of cobalt content

The method is applicable to cobalt contents between 0,01 % (m/m) and 4 % (m/m). The general requirements concerning the apparatus, sampling, dissolution of the test sample, atomic absorption measurements, calculations and test report are given in ISO 7530-1. Specifies principle, reagents, apparatus, sampling and sample preparation, procedure, expression of results and test report.

Alliages de nickel — Analyse par spectrométrie d'absorption atomique dans la flamme — Partie 2: Dosage du cobalt

La présente partie de l'ISO 7530 prescrit une méthode de dosage par spectrométrie d'absorption atomique dans la flamme du cobalt contenu à des teneurs comprises entre 0,01 % (m/m) et 4 % (m/m) dans les alliages de nickel. Les compositions types alliages de nickel sont données dans l'ISO 7530-1. Les prescriptions générales concernant l'appareillage, l'échantillonnage, la mise en solution de l'échantillon pour essai, les mesurages d'absorption atomique, les calculs et le rapport d'essai, sont données dans l'ISO 7530-1.

Nikljeve zlitine - Plamenska atomska absorpcijska spektrometrična analiza - 2. del: Ugotavljanje deleža kobalta

General Information

Status
Withdrawn
Publication Date
05-Dec-1990
Withdrawal Date
05-Dec-1990
Current Stage
9599 - Withdrawal of International Standard
Completion Date
18-Jun-2015

Relations

Buy Standard

Standard
ISO 7530-2:1990 - Nickel alloys -- Flame atomic absorption spectrometric analysis
English language
3 pages
sale 15% off
Preview
sale 15% off
Preview
Standard
ISO 7530-2:1996
English language
3 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day
Standard
ISO 7530-2:1990 - Alliages de nickel -- Analyse par spectrométrie d'absorption atomique dans la flamme
French language
3 pages
sale 15% off
Preview
sale 15% off
Preview
Standard
ISO 7530-2:1990 - Alliages de nickel -- Analyse par spectrométrie d'absorption atomique dans la flamme
French language
3 pages
sale 15% off
Preview
sale 15% off
Preview

Standards Content (Sample)

INTERNATIONAL
STANDARD 7530-2
First edition
1990-12-15
Nickel alloys - Flame atomic absorption
spectrometric analysis -
Part 2:
Determination of Cobalt content
Alliaqes de nicke/ - Analyse par spectrom&trie d’absorpfion atomique
dans- la flamme -
Partie 2: Dosage du Cobalt
Reference number
ISO 7530-2: 199Of E)

---------------------- Page: 1 ----------------------
ISO 7530-2:1990(E)
Foreword
ISO (the International Organization for Standardization) is a worldwide
federation of national Standards bodies (ISO member bodies). The work
of preparing International Standards is normally carried out through ISO
technical committees. Esch member body interested in a subject for
which a technical committee has been established has the right to be
International organizations, govern-
represented on that committee.
mental and non-governmental, in liaison with ISO, also take part in the
work. ISO collaborates closely with the International Electrotechnical
Commission (IEC) on all matters of electrotechnical standardization.
Draft International Standards adopted by the technical committees are
circulated to the member bodies for voting. Publication as an Inter-
national Standard requires approval by at least 75 % of the member
bodies casting a vote.
International Standard ISO 7530-2 was prepared by Technical Committee
ISO/TC 155, Nickel and nicke1 alloys.
ISO 7530 consists of the following Parts, under the general title Nickel
alloys - Flame atomic absorption specfrornetric analysis:
-
Part 1: General requirements and Sample dissolution
- Part 2: Determination ofcobalt content
- Part 3: Determination of chromium content
- Part 4: Determination of topper content
- Part 5: Determination of iron contenf
- Part 6: Determination of manganese content
- Part 7r Determination of aluminium content
- Part 8: Determination of silicon confenf
- Part 9: Determination of vanadium content
0 ISO 1990
All rights reserved. No part of this publication may be reproduced or utilized in any form
or by any means, electronie or mechanical, including photocopying and microfilm, without
Permission in writing from the publisher.
Intern ational Organization for Standardization
Case Postale 56 l CH-121 1 Geneve 20 l Switzer land
Printed in Switzerland
ii

---------------------- Page: 2 ----------------------
INTERNATIONAL STANDARD ISO 7530=2:1990(E)
Nickel alloys - Fllame atomic absorption spectrometric
analysis -
Part 2:
Determination of Cobalt content
3 Principle
1 Scope
Dissolution of a test Portion in acid and aspiration
This part of ISO 7530 specifies a flame atomic ab-
of the test Solution into an air-acetylene flame of an
sorption spectrometric method for the determination
atomic absorption spectrometer.
of Cobalt in the range of 0,Ol % (m/m) to 4 % (m/m)
in nicke1 alloys. Typical compositions of some nicke1
Measurement of the absorbance of the resonance
alloys at-e given in ISO 7530-1, annex B.
line energy from the spectrum of Cobalt and com-
parison with that of calibration solutions at a wave-
The general requirements concerning the appar-
atus, sampling, dissolution of the test Sample, length of 240,7 nm.
atomic absorption measurements, calculations and
test report are qiven in ISO 7530-1.
x
4 Reagents
In addition to the reagents listed in ISO 7530-1, the
following special reagents arc required.
2 Normative references
4.1 Strontium chloride, solution.
The following Standards contain provisions which,
Transfer 113,5 g of strontium chloride hexahydrate
through reference in this text, constitute provisions
(SrCI,-GH,O) to a 600 ml beaker, dissolve in 400 ml
of this part of ISO 7530. At the time of publication,
of hot water (50 “C to 60 “C), cool and transfer to a
the editions indicated were valid. All Standards are
1000 ml one-mark volumetric flask. Make up to the
subject to revision, and Parties to agreements based
mark with water and mix. The s!rontium chloride
on this part of ISO 7530 are encouraged to investi-
should be free of heavy metals.
gate the possibility of applying the most recent edi-
tions of the Standards indicated below. Members of
IEC and ISO maintain registers of currently valid
4.2 Cobalt, Standard reference Solution (1,000 g/l).
International Standards.
Weigh, to the nearest 0,001 g, 1,000 g of Cobalt metal
of 99,9 % (m/m) minimum purity and transfer to a
ISO 5725:1986, Precision of fest methods - Determi-
400 ml beaker. Add 30 ml of hydrochloric acid
nation of repeatability and reproducibility for a stan-
= IJ8 g/ml) diluted 1 + 1 and heat to com-
dard test metl-tod by inter-laboratory tests.
CP20
plete dissolution. Cool, transfer to a 1000 ml one-
mark volumetric flask and add 35 ml of hydrochlor
...

SLOVENSKI STANDARD
SIST ISO 7530-2:1996
01-avgust-1996
1LNOMHYH]OLWLQH3ODPHQVNDDWRPVNDDEVRUSFLMVNDVSHNWURPHWULþQDDQDOL]DGHO
8JRWDYOMDQMHGHOHåDNREDOWD
Nickel alloys -- Flame atomic absorption spectrometric analysis -- Part 2: Determination
of cobalt content
Alliages de nickel -- Analyse par spectrométrie d'absorption atomique dans la flamme --
Partie 2: Dosage du cobalt
Ta slovenski standard je istoveten z: ISO 7530-2:1990
ICS:
77.120.40 Nikelj, krom in njune zlitine Nickel, chromium and their
alloys
SIST ISO 7530-2:1996 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST ISO 7530-2:1996

---------------------- Page: 2 ----------------------

SIST ISO 7530-2:1996
INTERNATIONAL
STANDARD 7530-2
First edition
1990-12-15
Nickel alloys - Flame atomic absorption
spectrometric analysis -
Part 2:
Determination of Cobalt content
Alliaqes de nicke/ - Analyse par spectrom&trie d’absorpfion atomique
dans- la flamme -
Partie 2: Dosage du Cobalt
Reference number
ISO 7530-2: 199Of E)

---------------------- Page: 3 ----------------------

SIST ISO 7530-2:1996
ISO 7530-2:1990(E)
Foreword
ISO (the International Organization for Standardization) is a worldwide
federation of national Standards bodies (ISO member bodies). The work
of preparing International Standards is normally carried out through ISO
technical committees. Esch member body interested in a subject for
which a technical committee has been established has the right to be
International organizations, govern-
represented on that committee.
mental and non-governmental, in liaison with ISO, also take part in the
work. ISO collaborates closely with the International Electrotechnical
Commission (IEC) on all matters of electrotechnical standardization.
Draft International Standards adopted by the technical committees are
circulated to the member bodies for voting. Publication as an Inter-
national Standard requires approval by at least 75 % of the member
bodies casting a vote.
International Standard ISO 7530-2 was prepared by Technical Committee
ISO/TC 155, Nickel and nicke1 alloys.
ISO 7530 consists of the following Parts, under the general title Nickel
alloys - Flame atomic absorption specfrornetric analysis:
-
Part 1: General requirements and Sample dissolution
- Part 2: Determination ofcobalt content
- Part 3: Determination of chromium content
- Part 4: Determination of topper content
- Part 5: Determination of iron contenf
- Part 6: Determination of manganese content
- Part 7r Determination of aluminium content
- Part 8: Determination of silicon confenf
- Part 9: Determination of vanadium content
0 ISO 1990
All rights reserved. No part of this publication may be reproduced or utilized in any form
or by any means, electronie or mechanical, including photocopying and microfilm, without
Permission in writing from the publisher.
Intern ational Organization for Standardization
Case Postale 56 l CH-121 1 Geneve 20 l Switzer land
Printed in Switzerland
ii

---------------------- Page: 4 ----------------------

SIST ISO 7530-2:1996
INTERNATIONAL STANDARD ISO 7530=2:1990(E)
Nickel alloys - Fllame atomic absorption spectrometric
analysis -
Part 2:
Determination of Cobalt content
3 Principle
1 Scope
Dissolution of a test Portion in acid and aspiration
This part of ISO 7530 specifies a flame atomic ab-
of the test Solution into an air-acetylene flame of an
sorption spectrometric method for the determination
atomic absorption spectrometer.
of Cobalt in the range of 0,Ol % (m/m) to 4 % (m/m)
in nicke1 alloys. Typical compositions of some nicke1
Measurement of the absorbance of the resonance
alloys at-e given in ISO 7530-1, annex B.
line energy from the spectrum of Cobalt and com-
parison with that of calibration solutions at a wave-
The general requirements concerning the appar-
atus, sampling, dissolution of the test Sample, length of 240,7 nm.
atomic absorption measurements, calculations and
test report are qiven in ISO 7530-1.
x
4 Reagents
In addition to the reagents listed in ISO 7530-1, the
following special reagents arc required.
2 Normative references
4.1 Strontium chloride, solution.
The following Standards contain provisions which,
Transfer 113,5 g of strontium chloride hexahydrate
through reference in this text, constitute provisions
(SrCI,-GH,O) to a 600 ml beaker, dissolve in 400 ml
of this part of ISO 7530. At the time of publication,
of hot water (50 “C to 60 “C), cool and transfer to a
the editions indicated were valid. All Standards are
1000 ml one-mark volumetric flask. Make up to the
subject to revision, and Parties to agreements based
mark with water and mix. The s!rontium chloride
on this part of ISO 7530 are encouraged to investi-
should be free of heavy metals.
gate the possibility of applying the most recent edi-
tions of the Standards indicated below. Members of
IEC and IS
...

NORME
INTERNATIONALE
7530-2
Première édition
1990-12-15
Alliages de nickel - Analyse par spectrométrie
d’absorption atomique dans la flamme -
Partie 2:
Dosage du cobalt
Nickel alloys - Flame atomic absorption spectrometric analysis -
Par-t 2: Determination of cobalt content
Numéro de référence
ISO 7530-2: 1990(F)

---------------------- Page: 1 ----------------------
ISO 7530=2:1990(F)
Avant-propos
L’ISO (Organisation internationale de normalisation) est une fédération
mondiale d’organismes nationaux de normalisation (comités membres
de I’ISO). L’élaboration des Normes internationales est en général
confiée aux comités techniques de I’ISO. Chaque comité membre inté-
ressé par une étude a le droit de faire partie du comité technique créé
à cet effet. Les organisations internationales, gouvernementales et non
gouvernementales, en liaison avec I’ISO participent également aux tra-
vaux. L’ISO collabore étroitement avec la Commission électrotechnique
internationale (CEI) en ce qui concerne la normalisation électrotech-
nique.
Les projets de Normes internationales adoptés par les comités techni-
ques sont soumis aux comités membres pour vote. Leur publication
comme Normes internationales requiert l’approbation de 75 % au moins
des comités membres votants.
La Norme internationale ISO 7530-2 a été élaborée par le comité tech-
nique ISO/TC 155, Nickel et alliages de nickel.
L’ISO 7530 comprend les parties suivantes, présentées sous le titre gé-
néral Alliages de nickel - Analyse par spectrométrie d’absorption afo-
mique dans la flamme:
- Partie 1: Caractéristiques générales et mise en solution de
I’échan tillon
- Partie 2: Dosage du cobalt
- Partie 3: Dosage du chrome
- Partie 4: Dosage du cuivre
- Partie 5: Dosage du fer
- Partie 6: Dosage du manganèse
- Partie 7: Dosage de l’aluminium
- Partie 8: Dosage du silicium
- Partie 9: Dosage du vanadium
0 ISO 1990
Droits de reproduction réservés. Aucune partie de cette publication ne peut être repro-
duite ni utilisée sous quelque forme que ce soit et par aucun procédé, électronique ou
mécanique, y compris la photocopie et les microfilms, sans l’accord écrit de l’éditeur.
internationale de norm alisa tion
Organisation
Case Postale 36 l CH-1211 Genève 20 l Suisse
imprimé en Suisse
ii

---------------------- Page: 2 ----------------------
ISO 7530-2:1990(F)
NORME INTERNATIONALE
Alliages de nickel - Analyse par spectrométrie d’absorption
atomique dans la flamme -
Partie 2:
Dosage du cobalt
ISO 7530-l :-‘1, Alliages de nickel - Analyse par
1 Domaine d’application
spectrométrie d’absorption atomique dans la flamme
- Partie 1: Caractéristiques générales et mise en
La présente partie de I’ISO 7530 prescrit une mé-
solution de l’échantillon.
thode de dosage par spectrométrie d’absorption
atomique dans la flamme du cobalt contenu à des
teneurs comprises entre 0,Ol % (mfm) et
3 Principe
4 % (m/m) dans les alliages de nickel. Les compo-
sitions types de certains alliages de nickel sont
Mise en solution d’une prise d’essai dans l’acide et
données dans I’ISO 7530-I.
aspiration de la solution dans la flamme
air/acétylène d’un spectromètre d’absorption ato-
Les prescriptions générales concernant I’appa-
mique.
reillage, l’échantillonnage, la mise en solution de
l’échantillon pour essai, les mesurages d’absorption
Mesurage de I’absorbance de l’énergie de la raie
atomique, les calculs et le rapport d’essai, sont
de résonance du spectre de cobalt et comparaison
données dans I’ISO 7530-I.
de celle-ci avec I’absorbance des solutions d’éta-
lonnage à une longueur d’onde de 240,7 nm.
4 Réactifs
2 Références normatives
Outre les réactifs énumérés dans I’ISO 7530-1, les
réactifs spéciaux suivants sont nécessaires:
Les normes suivantes contiennent des dispositions
qui, par suite de la référence qui en est faite,
constituent des dispositions valables pour la pré-
4.1 Chlorure de strontium, solution
sente partie de I’ISO 7530. Au moment de la publi-
cation, les éditions indiquées étaient en vigueur. Transférer dans un bécher de 600 ml, 113,5 g de
chlorure de strontium hexahydraté (SrCI*.GH,O);
Toute norme est sujette à révision et les parties
mettre en solution avec 400 ml d’eau chaude (50 OC
prenantes des accords fondés sur la présente partie
de I’ISO 7530 sont invitées à rechercher la possi- à 60 OC), refroidir et transvaser dans une fiole jau-
gée de 1000 ml. Diluer au trait de jauge avec de
bilité d’appliquer les éditions les plus récentes des
normes indiquées ci-après. Les membres de la CEI l’eau et homogénéiser. Le chlorure de strontium doit
être exempt de métaux lourds.
et de I’ISO possèdent le registre des Normes inter-
nationales en vigueur à un moment donné.
4.2 Cobalt, solution étalon de référence (1,000 g/l)
ISO 5725:4986, Fidélité des méthodes d’essai - Dé-
termination de la répétabilité et de la reproductibilifé Peser à 0,001 g près, 1,000 g de cobalt métallique,
d’une méthode d’essai normalisée par essais inter- d’une pureté minimale de 99,9 % (m/m) et transfé-
laboratoires.
rer dans un bécher de 400 ml. Ajouter 30 ml d’acide
-P-P
1) À publier.
1

---------------------- Page: 3 ----------------------
ISO 7530-2:1990(F)
7.1.2 Dilut
...

NORME
INTERNATIONALE
7530-2
Première édition
1990-12-15
Alliages de nickel - Analyse par spectrométrie
d’absorption atomique dans la flamme -
Partie 2:
Dosage du cobalt
Nickel alloys - Flame atomic absorption spectrometric analysis -
Par-t 2: Determination of cobalt content
Numéro de référence
ISO 7530-2: 1990(F)

---------------------- Page: 1 ----------------------
ISO 7530=2:1990(F)
Avant-propos
L’ISO (Organisation internationale de normalisation) est une fédération
mondiale d’organismes nationaux de normalisation (comités membres
de I’ISO). L’élaboration des Normes internationales est en général
confiée aux comités techniques de I’ISO. Chaque comité membre inté-
ressé par une étude a le droit de faire partie du comité technique créé
à cet effet. Les organisations internationales, gouvernementales et non
gouvernementales, en liaison avec I’ISO participent également aux tra-
vaux. L’ISO collabore étroitement avec la Commission électrotechnique
internationale (CEI) en ce qui concerne la normalisation électrotech-
nique.
Les projets de Normes internationales adoptés par les comités techni-
ques sont soumis aux comités membres pour vote. Leur publication
comme Normes internationales requiert l’approbation de 75 % au moins
des comités membres votants.
La Norme internationale ISO 7530-2 a été élaborée par le comité tech-
nique ISO/TC 155, Nickel et alliages de nickel.
L’ISO 7530 comprend les parties suivantes, présentées sous le titre gé-
néral Alliages de nickel - Analyse par spectrométrie d’absorption afo-
mique dans la flamme:
- Partie 1: Caractéristiques générales et mise en solution de
I’échan tillon
- Partie 2: Dosage du cobalt
- Partie 3: Dosage du chrome
- Partie 4: Dosage du cuivre
- Partie 5: Dosage du fer
- Partie 6: Dosage du manganèse
- Partie 7: Dosage de l’aluminium
- Partie 8: Dosage du silicium
- Partie 9: Dosage du vanadium
0 ISO 1990
Droits de reproduction réservés. Aucune partie de cette publication ne peut être repro-
duite ni utilisée sous quelque forme que ce soit et par aucun procédé, électronique ou
mécanique, y compris la photocopie et les microfilms, sans l’accord écrit de l’éditeur.
internationale de norm alisa tion
Organisation
Case Postale 36 l CH-1211 Genève 20 l Suisse
imprimé en Suisse
ii

---------------------- Page: 2 ----------------------
ISO 7530-2:1990(F)
NORME INTERNATIONALE
Alliages de nickel - Analyse par spectrométrie d’absorption
atomique dans la flamme -
Partie 2:
Dosage du cobalt
ISO 7530-l :-‘1, Alliages de nickel - Analyse par
1 Domaine d’application
spectrométrie d’absorption atomique dans la flamme
- Partie 1: Caractéristiques générales et mise en
La présente partie de I’ISO 7530 prescrit une mé-
solution de l’échantillon.
thode de dosage par spectrométrie d’absorption
atomique dans la flamme du cobalt contenu à des
teneurs comprises entre 0,Ol % (mfm) et
3 Principe
4 % (m/m) dans les alliages de nickel. Les compo-
sitions types de certains alliages de nickel sont
Mise en solution d’une prise d’essai dans l’acide et
données dans I’ISO 7530-I.
aspiration de la solution dans la flamme
air/acétylène d’un spectromètre d’absorption ato-
Les prescriptions générales concernant I’appa-
mique.
reillage, l’échantillonnage, la mise en solution de
l’échantillon pour essai, les mesurages d’absorption
Mesurage de I’absorbance de l’énergie de la raie
atomique, les calculs et le rapport d’essai, sont
de résonance du spectre de cobalt et comparaison
données dans I’ISO 7530-I.
de celle-ci avec I’absorbance des solutions d’éta-
lonnage à une longueur d’onde de 240,7 nm.
4 Réactifs
2 Références normatives
Outre les réactifs énumérés dans I’ISO 7530-1, les
réactifs spéciaux suivants sont nécessaires:
Les normes suivantes contiennent des dispositions
qui, par suite de la référence qui en est faite,
constituent des dispositions valables pour la pré-
4.1 Chlorure de strontium, solution
sente partie de I’ISO 7530. Au moment de la publi-
cation, les éditions indiquées étaient en vigueur. Transférer dans un bécher de 600 ml, 113,5 g de
chlorure de strontium hexahydraté (SrCI*.GH,O);
Toute norme est sujette à révision et les parties
mettre en solution avec 400 ml d’eau chaude (50 OC
prenantes des accords fondés sur la présente partie
de I’ISO 7530 sont invitées à rechercher la possi- à 60 OC), refroidir et transvaser dans une fiole jau-
gée de 1000 ml. Diluer au trait de jauge avec de
bilité d’appliquer les éditions les plus récentes des
normes indiquées ci-après. Les membres de la CEI l’eau et homogénéiser. Le chlorure de strontium doit
être exempt de métaux lourds.
et de I’ISO possèdent le registre des Normes inter-
nationales en vigueur à un moment donné.
4.2 Cobalt, solution étalon de référence (1,000 g/l)
ISO 5725:4986, Fidélité des méthodes d’essai - Dé-
termination de la répétabilité et de la reproductibilifé Peser à 0,001 g près, 1,000 g de cobalt métallique,
d’une méthode d’essai normalisée par essais inter- d’une pureté minimale de 99,9 % (m/m) et transfé-
laboratoires.
rer dans un bécher de 400 ml. Ajouter 30 ml d’acide
-P-P
1) À publier.
1

---------------------- Page: 3 ----------------------
ISO 7530-2:1990(F)
7.1.2 Dilut
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.