ISO 13105-1:2023
(Main)Building construction machinery and equipment - Machinery for concrete surface floating and finishing - Part 1: Commercial specifications
Building construction machinery and equipment - Machinery for concrete surface floating and finishing - Part 1: Commercial specifications
This document establishes the content for commercial specifications for machines used for concrete surface floating and finishing (also known as power trowels). This includes pedestrian-controlled equipment and ride-on equipment. This document does not address strike-off type machines, commonly known as screeds.
Machines et matériels pour la construction des bâtiments — Talocheuses-lisseuses de mortier — Partie 1: Spécifications commerciales
General Information
Relations
Overview
ISO 13105-1:2023 - "Building construction machinery and equipment - Machinery for concrete surface floating and finishing - Part 1: Commercial specifications" defines the commercial data and product information that manufacturers and suppliers must present for machines commonly called power trowels. This second edition (2023) covers both pedestrian-controlled and ride-on power trowels used for concrete surface floating and finishing. It explicitly excludes strike-off machines (screeds). The document complements ISO 13105-2, which covers safety requirements and verification.
Key topics
The standard specifies the content of commercial specifications and the essential technical information to be published for each model. Key topics include:
- General product identification
- model, type, manufacturer, serial number
- Prime mover details
- internal combustion engine (type, model, operating speed, certified net power, fuel type and tank capacity)
- electric motor (model, rated power/current, voltage/frequency, speeds)
- pneumatic/hydraulic motor (model, rated power/displacement, pressure, flow)
- Rotor and blade information
- number of blades, pitch (fixed or adjustable), rotor diameter (swept circle), rotor speed range
- Mass and weight data
- operating mass (definition including operator where applicable) and shipping/nominal mass
- Pedestrian-controlled machine details
- handle type and height, guard ring diameter, overall length (see Annex A)
- Ride-on machine details
- swept path width, unswept distance between rotors, retardant tank capacity, battery capacity, transmission and steering types, overall dimensions, operator seat height
- Informative diagrams
- Annex A provides dimensional diagrams for operating mode (pedestrian and ride-on layouts)
Applications
ISO 13105-1:2023 is primarily used to standardize commercial product information for concrete finishing equipment. Typical users include:
- Manufacturers and OEMs creating datasheets and product catalogs for power trowels
- Procurement teams and specifiers writing tender documents and technical purchase specifications
- Equipment dealers and rental companies listing technical attributes clearly for customers
- Contractors and concrete finishers comparing machine capabilities (rotor size, blade pitch, operating mass)
- Standards committees and testing laboratories coordinating with ISO 13105-2 (safety) and related references
Related standards
- ISO 13105-2 - Machinery for concrete surface floating and finishing - Part 2: Safety requirements and verification (normative reference)
- ISO 6016 - for mass measurement methods (referenced)
- EN 12649 - related safety guidance for concrete compaction and smoothing machines
Keywords: ISO 13105-1:2023, power trowel, concrete surface floating and finishing, commercial specifications, pedestrian-controlled, ride-on, rotor diameter, blade pitch, operating mass.
Standards Content (Sample)
INTERNATIONAL ISO
STANDARD 13105-1
Second edition
2023-10
Building construction machinery and
equipment — Machinery for concrete
surface floating and finishing —
Part 1:
Commercial specifications
Machines et matériels pour la construction des bâtiments —
Talocheuses-lisseuses de mortier —
Partie 1: Spécifications commerciales
Reference number
© ISO 2023
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may
be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting on
the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address below
or ISO’s member body in the country of the requester.
ISO copyright office
CP 401 • Ch. de Blandonnet 8
CH-1214 Vernier, Geneva
Phone: +41 22 749 01 11
Email: copyright@iso.org
Website: www.iso.org
Published in Switzerland
ii
Contents Page
Foreword .iv
1 Scope . 1
2 Normative references . 1
3 Terms and definitions . 1
4 Commercial specifications . 2
4.1 General . 2
4.2 Pedestrian-controlled power trowel . 3
4.3 Ride-on power trowel . 3
Annex A (informative) Power trowel dimensions in operating mode . 5
Bibliography . 7
iii
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards
bodies (ISO member bodies). The work of preparing International Standards is normally carried out
through ISO technical committees. Each member body interested in a subject for which a technical
committee has been established has the right to be represented on that committee. International
organizations, governmental and non-governmental, in liaison with ISO, also take part in the work.
ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of
electrotechnical standardization.
The procedures used to develop this document and those intended for its further maintenance are
described in the ISO/IEC Directives, Part 1. In particular, the different approval criteria needed for the
different types of ISO document should be noted. This document was drafted in accordance with the
editorial rules of the ISO/IEC Directives, Part 2 (see www.iso.org/directives).
ISO draws attention to the possibility that the implementation of this document may involve the use
of (a) patent(s). ISO takes no position concerning the evidence, validity or applicability of any claimed
patent rights in respect thereof. As of the date of publication of this document, ISO had not received
notice of (a) patent(s) which may be required to implement this document. However, implementers are
cautioned that this may not represent the latest information, which may be obtained from the patent
database available at www.iso.org/patents. ISO shall not be held responsible for identifying any or all
such patent rights.
Any trade name used in this document is information given for the convenience of users and does not
constitute an endorsement.
For an explanation of the voluntary nature of standards, the meaning of ISO specific terms and
expressions related to conformity assessment, as well as information about ISO's adherence to
the World Trade Organization (WTO) principles in the Technical Barriers to Trade (TBT), see
www.iso.org/iso/foreword.html.
This document was prepared by Technical Committee ISO/TC 195, Building construction machinery and
equipment, Subcommittee SC 1, Machinery and equipment for concrete work.
This second edition cancels and replaces the first edition (ISO 13105-1:2014), which has been technically
revised.
The main changes are as follows:
— updated normative references.
A list of all parts in the ISO 13105 series can be found on the ISO website.
Any feedback or questions on this document should be directed to the user’s national standards body. A
complete listing of these bodies can be found at www.iso.org/members.html.
iv
INTERNATIONAL STANDARD ISO 13105-1:2023(E)
Building co
...
Frequently Asked Questions
ISO 13105-1:2023 is a standard published by the International Organization for Standardization (ISO). Its full title is "Building construction machinery and equipment - Machinery for concrete surface floating and finishing - Part 1: Commercial specifications". This standard covers: This document establishes the content for commercial specifications for machines used for concrete surface floating and finishing (also known as power trowels). This includes pedestrian-controlled equipment and ride-on equipment. This document does not address strike-off type machines, commonly known as screeds.
This document establishes the content for commercial specifications for machines used for concrete surface floating and finishing (also known as power trowels). This includes pedestrian-controlled equipment and ride-on equipment. This document does not address strike-off type machines, commonly known as screeds.
ISO 13105-1:2023 is classified under the following ICS (International Classification for Standards) categories: 01.040.91 - Construction materials and building (Vocabularies); 91.220 - Construction equipment. The ICS classification helps identify the subject area and facilitates finding related standards.
ISO 13105-1:2023 has the following relationships with other standards: It is inter standard links to ISO 13105-1:2014. Understanding these relationships helps ensure you are using the most current and applicable version of the standard.
You can purchase ISO 13105-1:2023 directly from iTeh Standards. The document is available in PDF format and is delivered instantly after payment. Add the standard to your cart and complete the secure checkout process. iTeh Standards is an authorized distributor of ISO standards.
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.
Loading comments...