ISO/TR 8357:1996

Road vehicles — Instructions for the implementation of the assignment of world manufacturer identifier (WMI) codes for vehicle identification number (VIN) systems and for world parts manufacturer identifier (WPMI) codes

Gives instructions relating to the requesting and assignment of the WMI codes and WPMI codes according to ISO 3780 and ISO 4100.

Véhicules routiers — Instructions pour la mise en application de l'attribution des codes d'identification mondiale des constructeurs (WMI) pour les numéros d'identification des véhicules (VIN) et pour les codes d'identification mondiale des fabricants d'équipements (WPMI)

General Information

• Status: Published
• Publication Date: 11-Dec-1996
• ICS: 43.020 - Road vehicles in general
• Technical Committee: ISO/TC 22 - Road vehicles
• Drafting Committee: ISO/TC 22 - Road vehicles
• Current Stage: 6060 - International Standard published
• Completion Date: 12-Dec-1996

Standards Content (Sample)

TECHN%CAL ISO/TR
REPORT
8357
First edition
1996-l 2-l 5
Road vehicles - Instructions for
the implementation of the assignment
of world manufacturer identifier (WMI)
codes for vehicle identification number
(VIN) systems and for world parts
manufacturer identifier (WPMI) codes
V6hicules routiers - Instructions pour la mise en application de
/‘attribution des codes d’identification mondiale des constructeurs (WMI)
pour /es num&os d/identification des v6hicules (V/N) et pour /es codes
d ‘iden tifica tion mondiale des fabrican ts d ‘gquipemen ts (WPMI)
Reference number
ISO/TR 8357:1996(E)

---------------------- Page: 1 ----------------------
ISO/TR 8357: 1996(E)
Foreword
IS0 (the International Organization for Standardization) is a worldwide
federation of national standards bodies (IS0 member bodies). The work of
preparing International Standards is normally carried out through IS0
technical committees. Each member body interested in a subject for
which a technical committee has been established has the right to be
represented on that committee. International organizations, governmental
and non-governmental, in liaison with ISO, also take part in the work. IS0
collaborates closely with the International Electrotechnical Commission
(I EC) on all matters of electrotechnical standardization.
The main task of technical committees is to prepare International
Standards, but in exceptional circumstances a technical committee may
propose the publication of a Technical Report of one of the following
types:
the required support cannot be obtained for the
- type 1, when
publication of a n I nternationa Standard, despite repeated effo rts;
3 still under technical development or
- type 2, when the subject ic
where for any other reason there is the future but not immediate
possibility of an agreement on an International Standard;
type 3, when a technical committee has collected data of a different
-
kind from that which is normally published as an International
Standard (“state of the art”, for example).
Technical Reports of types 1 and 2 are subject to review within three
years of publication, to decide whether they can be transformed into
International Standards. Technical Reports of type 3 do not necessarily
have to be reviewed until the data they provide are considered to be no
longer valid or useful.
ISO/TR 8357, which is a Technical Report of type 3, was prepared
by Technical Committee lSO/TC 22, Road vehicles.
0 IS0 1996
All rights reserved. Unless otherwise specified, no part of this publication may be
reproduced or utilized in any form or by any means, electronic or mechanical, including
photocopying and microfilm, without permission in writing from the publisher.
International Organization for Standardization
Case Postale 56 l CH-1211 Geneve 20 l Switzerland
Printed in Switzerland
ii

---------------------- Page: 2 ----------------------
TECHNICAL REPORT @ IS0 ISO/TR 8357: 1996(E)
- Instructions for the implementation of the
Road vehicles
assignment of world manufacturer identifier (WMI) codes for
vehicle identification number (VIN) systems and for world parts
manufacturer identifier (WPMI) codes
1 Scope
This Technical Report gives instructions relating to the requesting and assignment of the WMI codes and
WPMI codes according to IS0 3780 and IS0 4100 and for the maintenance of the master assignment lists
and files.
2 References
IS0 3779:1983, Road vehicles - Vehicle identification number (V/N) - Content and structure.
World manufacturer identifier (WMI) code.
IS0 3780:1983, Road vehicles -
IS0 4100:1980, Road vehicles - World parts manufacturer identifier (WPMI) code.
3 Definitions
3.1 International Agency (IA): The agency designated by the International Organization for
Standardization as being responsible for the assignment of the first two characters of the WMI codes and
the WPMI codes to each country having vehicle manufacturers and/or vehicle parts manufacturers.
1

---------------------- Page: 3 ----------------------
0 IS0
ISO/TR 8357: 1996(E)
NOTE - The designated International Agency for WMI and WPMI code assignments is:
The Society of Automotive Engineers, Inc.
400 Commonwealth Drive
Warrendale
Pennsylvania 15096
U.S.A.
3.2 National Organization (NO): The organization, other than a manufacturer of vehicles, which has
been designated to assign the WMI codes and WPMI codes to manufacturers of vehicles and/or related
parts.
4 Procedures
4.1 Designation of National Organizations
4.1.1 In each country a National Organization shall be designated.
4.2 Assignment of WMI and WPMI country codes
4.2.1 The National Organization of each country having vehicle manufacturers and/or vehicle parts
manufacturers will request from the International Agency the first two characters of
...