ISO 27831-2:2008
(Main)Metallic and other inorganic coatings — Cleaning and preparation of metal surfaces — Part 2: Non-ferrous metals and alloys
Metallic and other inorganic coatings — Cleaning and preparation of metal surfaces — Part 2: Non-ferrous metals and alloys
ISO 27831-2:2008 specifies processes for the cleaning of the surfaces of non-ferrous metals and their alloys to remove any irrelevant or unwanted deposits or other material at any stage of manufacture, storage or service and for the preparation of these surfaces for further treatment. It does not cover cleaning operations associated with the preliminary removal of heavy deposits of oil, grease or dirt accumulated during operational service, preparations for welding or the cleaning of electrical contacts. It covers processes which are needed for the preparation of metal surfaces prior to the application of the following surface coatings: electrodeposited metal coatings; autocatalytic metal coatings (autocatalytic and displacement types); conversion coatings; anodic oxidation coatings; hot-dipped coatings; sprayed metal coatings; coatings produced by vitreous enamelling; coatings produced by physical vapour deposition of aluminium and cadmium; powder coatings. It describes processes for carrying out the following treatments: degreasing; descaling; pickling; etching; de-rusting; chemical smoothing; chemical polishing; electrobrightening; electropolishing; fluoride anodizing (for cleaning magnesium alloys). It relates the processes described above to the following metals: aluminium and aluminium alloys; copper and copper alloys; nickel alloys; titanium and titanium alloys; magnesium alloys; zinc-based alloys; tin and tin alloys; tungsten alloys; lead and lead alloys; zinc-, cadmium-, chromium- and gold-coated items.
Revêtements métalliques et autres revêtements inorganiques — Nettoyage et préparation des surfaces métalliques — Partie 2: Métaux non ferreux et alliages
General Information
Standards Content (Sample)
INTERNATIONAL ISO
STANDARD 27831-2
First edition
2008-10-15
Metallic and other inorganic coatings —
Cleaning and preparation of metal
surfaces —
Part 2:
Non-ferrous metals and alloys
Revêtements métalliques et autres revêtements inorganiques —
Nettoyage et préparation des surfaces métalliques —
Partie 2: Métaux non ferreux et alliages
Reference number
ISO 27831-2:2008(E)
©
ISO 2008
---------------------- Page: 1 ----------------------
ISO 27831-2:2008(E)
PDF disclaimer
This PDF file may contain embedded typefaces. In accordance with Adobe's licensing policy, this file may be printed or viewed but
shall not be edited unless the typefaces which are embedded are licensed to and installed on the computer performing the editing. In
downloading this file, parties accept therein the responsibility of not infringing Adobe's licensing policy. The ISO Central Secretariat
accepts no liability in this area.
Adobe is a trademark of Adobe Systems Incorporated.
Details of the software products used to create this PDF file can be found in the General Info relative to the file; the PDF-creation
parameters were optimized for printing. Every care has been taken to ensure that the file is suitable for use by ISO member bodies. In
the unlikely event that a problem relating to it is found, please inform the Central Secretariat at the address given below.
COPYRIGHT PROTECTED DOCUMENT
© ISO 2008
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or by any means,
electronic or mechanical, including photocopying and microfilm, without permission in writing from either ISO at the address below or
ISO's member body in the country of the requester.
ISO copyright office
Case postale 56 • CH-1211 Geneva 20
Tel. + 41 22 749 01 11
Fax + 41 22 749 09 47
E-mail copyright@iso.org
Web www.iso.org
Published in Switzerland
ii © ISO 2008 – All rights reserved
---------------------- Page: 2 ----------------------
ISO 27831-2:2008(E)
Contents Page
Foreword. vii
Introduction . viii
1 Scope . 1
2 Normative references . 2
3 Terms and definitions. 3
4 Essential information to be supplied by the purchaser to the processor . 3
5 Requirements . 4
6 Standard cleaning methods. 5
7 Non-corrosion-resisting steels, cast irons and pure irons . 5
8 Corrosion-resisting and heat-resisting steels .6
9 Pretreatment of metals prior to powder coating . 6
10 Cleaning and preparation processes. 6
11 Aluminium and aluminium alloys. 6
11.1 General. 6
11.2 General degreasing and cleaning . 6
11.3 Removal of corrosion products . 6
11.4 Preparation prior to anodizing . 7
11.5 Preparation prior to oxide removal treatment (process O) or filming treatment . 7
11.6 Preparation prior to adhesive bonding of unanodized items . 7
11.7 Preparation prior to electroplating. 7
11.8 Preparation prior to autocatalytic nickel plating
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.