Metallic and other inorganic coatings - Electrodeposited coatings of nickel, nickel plus chromium, copper plus nickel and of copper plus nickel plus chromium (ISO 1456:2009)

ISO 1456:2009 specifies requirements for decorative nickel, nickel plus chromium, copper plus nickel and copper plus nickel plus chromium coatings that are applied to iron, steel, zinc alloys, copper and copper alloys, and to aluminium and aluminium alloys, to provide an attractive appearance and enhanced corrosion resistance. Coating designations are specified that differ in thickness and type, and guidance is given on selecting the coating designation appropriate for the service conditions to which the coated product will be exposed.
ISO 1456:2009 does not specify the surface condition required by the basis metal prior to the coating process, and is not applicable to coatings on sheet, strip or wire in the non-fabricated form nor to threaded fasteners or coil springs.

Metallische und andere anorganische Überzüge - Galvanische Überzüge aus Nickel, Nickel plus Chrom, Kupfer plus Nickel und Kupfer plus Nickel plus Chrom (ISO 1456:2009)

Diese Internationale Norm legt Anforderungen an dekorative Überzüge aus Nickel, Nickel plus Chrom, Kupfer plus Nickel und Kupfer plus Nickel plus Chrom fest, die auf Eisen, Stahl, Zinklegierungen, Kupfer und Kupferlegierungen und auf Aluminium und Aluminiumlegierungen abgeschieden werden, um Aussehen und Korrosionsbeständigkeit zu verbessern. Bezeichnungen der Überzüge werden festgelegt, die sich in Dicke und Art unterscheiden, und es wird ein Leitfaden für die Auswahl der geeigneten Bezeichnung gegeben, in Abhängigkeit von der Beanspruchungsstufe, der der beschichtete Artikel ausgesetzt wird.
Diese Internationale Norm legt keine Anforderungen an die Oberflächenbeschaffenheit des Grundmetalls vor der Abscheidung fest und gilt nicht für Überzüge auf Blechen, Bändern oder Drähten in unbearbeiteter Form (Halbzeug) und nicht für Verbindungselemente mit Gewinde oder Spiralfedern.
Anforderungen an dekorative, galvanische Überzüge aus Kupfer plus Nickel plus Chrom auf Kunststoffen werden in ISO 4525 festgelegt. ISO 4526 und ISO 6158 legen Anforderungen an galvanische Nickel- bzw. Chrom¬überzüge für technische Zwecke fest.

Revêtements métalliques et autres revêtements inorganiques - Dépôts électrolytiques de nickel, de nickel plus chrome, de cuivre plus nickel et de cuivre plus nickel plus chrome (ISO 1456:2009)

L'ISO 1456:2009 spécifie les exigences relatives aux dépôts décoratifs de nickel, de nickel plus chrome, de cuivre plus nickel et de cuivre plus nickel plus chrome qui sont appliqués sur le fer, l'acier, les alliages de zinc, le cuivre et les alliages de cuivre, l'aluminium et les alliages d'aluminium pour leur conférer un aspect agréable et pour améliorer leur résistance à la corrosion. Des désignations de dépôts sont spécifiées pour différentes épaisseurs et différents types de dépôts, et des indications sont données quant au choix du dépôt approprié à la condition d'utilisation prévue du produit revêtu.
L'ISO 1456:2009 ne spécifie pas l'état de surface du métal de base avant dépôt électrolytique et n'est pas applicable aux dépôts sur tôles, bandes ou fils bruts de laminage, sur éléments de fixation filetés ou sur ressorts en spirale.

Kovinske in druge anorganske prevleke - Galvanske prevleke niklja, nikelj-kroma, baker-niklja in baker-nikelj-kroma (ISO 1456:2009)

General Information

Status
Published
Publication Date
31-Jul-2009
Withdrawal Date
27-Feb-2010
Current Stage
6060 - Definitive text made available (DAV) - Publishing
Start Date
01-Aug-2009
Completion Date
01-Aug-2009

Relations

Buy Standard

Standard
EN ISO 1456:2009
English language
33 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day
Draft
prEN ISO 1456:2008
English language
29 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN ISO 1456:2009
01-oktober-2009
1DGRPHãþD
SIST EN 12540:2000
Kovinske in druge anorganske prevleke - Galvanske prevleke niklja, nikelj-kroma,
baker-niklja in baker-nikelj-kroma (ISO 1456:2009)
Metallic and other inorganic coatings - Electrodeposited coatings of nickel, nickel plus
chromium, copper plus nickel and of copper plus nickel plus chromium (ISO 1456:2009)
Metallische und andere anorganische Überzüge - Galvanische Überzüge aus Nickel,
Chrom-Nickel und Kupfer-Chrom-Nickel (ISO 1456:2009)
Revêtements métalliques et autres revêtements inorganiques - Dépôts électrolytiques de
nickel, de nickel plus chrome, de cuivre plus nickel et de cuivre plus nickel plus chrome
(ISO 1456:2009)
Ta slovenski standard je istoveten z: EN ISO 1456:2009
ICS:
25.220.40 Kovinske prevleke Metallic coatings
SIST EN ISO 1456:2009 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN ISO 1456:2009

---------------------- Page: 2 ----------------------

SIST EN ISO 1456:2009
EUROPEAN STANDARD
EN ISO 1456
NORME EUROPÉENNE
EUROPÄISCHE NORM
August 2009
ICS 25.220.40 Supersedes EN 12540:2000
English Version
Metallic and other inorganic coatings - Electrodeposited coatings
of nickel, nickel plus chromium, copper plus nickel and of copper
plus nickel plus chromium (ISO 1456:2009)
Revêtements métalliques et autres revêtements Metallische und andere anorganische Überzüge -
inorganiques - Dépôts électrolytiques de nickel, de nickel Galvanische Überzüge aus Nickel, Chrom-Nickel und
plus chrome, de cuivre plus nickel et de cuivre plus nickel Kupfer-Chrom-Nickel (ISO 1456:2009)
plus chrome (ISO 1456:2009)
This European Standard was approved by CEN on 8 July 2009.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national
standards may be obtained on application to the CEN Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the same status as the
official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland,
France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal,
Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2009 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 1456:2009: E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------

SIST EN ISO 1456:2009
EN ISO 1456:2009 (E)
Contents Page
Foreword .3

2

---------------------- Page: 4 ----------------------

SIST EN ISO 1456:2009
EN ISO 1456:2009 (E)
Foreword
This document (EN ISO 1456:2009) has been prepared by Technical Committee ISO/TC 107 "Metallic and
other inorganic coatings" in collaboration with Technical Committee CEN/TC 262 “Metallic and other inorganic
coatings”, the secretariat of which is held by BSI.
This European Standard shall be given the status of a national standard, either by publication of an identical
text or by endorsement, at the latest by February 2010, and conflicting national standards shall be withdrawn
at the latest by February 2010.
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent
rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent rights.
This document supersedes EN 12540:2000.
According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following
countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Cyprus, Czech
Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain,
Sweden, Switzerland and the United Kingdom.
Endorsement notice
The text of ISO 1456:2009 has been approved by CEN as a EN ISO 1456:2009 without any modification.

3

---------------------- Page: 5 ----------------------

SIST EN ISO 1456:2009

---------------------- Page:
...

SLOVENSKI STANDARD
oSIST prEN ISO 1456:2008
01-maj-2008
Kovinske in druge anorganske prevleke - Galvanske prevleke niklja, nikelj-kroma,
baker-niklja in baker-nikelj-kroma (ISO/DIS 1456:2008)
Metallic and other inorganic coatings - Electrodeposited coatings of nickel, nickel plus
chromium and of copper plus nickel plus chromium (ISO/DIS 1456:2008)
Metallische und andere anorganische Überzüge - Galvanische Nickel-Überzüge, Nickel-
Chrom-Überzüge und Kupfer-Nickel-Chrom-Überzüge (ISO/DIS 1456:2008)
Revêtements métalliques et inorganiques - Dépôts électrolytiques de nickel, de nickel
plus chrome et de cuivre plus nickel plus chrome (ISO/DIS 1456:2008)
Ta slovenski standard je istoveten z: prEN ISO 1456
ICS:
25.220.40
oSIST prEN ISO 1456:2008 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
EUROPEAN STANDARD
DRAFT
prEN ISO 1456
NORME EUROPÉENNE
EUROPÄISCHE NORM
February 2008
ICS Will supersede EN 12540:2000
English Version
Metallic and other inorganic coatings - Electrodeposited coatings
of nickel, nickel plus chromium and of copper plus nickel plus
chromium (ISO/DIS 1456:2008)
Revêtements métalliques et inorganiques - Dépôts Metallische und andere anorganische Überzüge -
électrolytiques de nickel, de nickel plus chrome et de cuivre Galvanische Nickel-Überzüge, Nickel-Chrom-Überzüge und
plus nickel plus chrome (ISO/DIS 1456:2008) Kupfer-Nickel-Chrom-Überzüge (ISO/DIS 1456:2008)
This draft European Standard is submitted to CEN members for parallel enquiry. It has been drawn up by the Technical Committee
CEN/TC 262.
If this draft becomes a European Standard, CEN members are bound to comply with the CEN/CENELEC Internal Regulations which
stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
This draft European Standard was established by CEN in three official versions (English, French, German). A version in any other language
made by translation under the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the
same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland,
France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal,
Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.
Recipients of this draft are invited to submit, with their comments, notification of any relevant patent rights of which they are aware and to
provide supporting documentation.
Warning : This document is not a European Standard. It is distributed for review and comments. It is subject to change without notice and
shall not be referred to as a European Standard.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: rue de Stassart, 36  B-1050 Brussels
© 2008 CEN All rights of exploitation in any form and by any means reserved Ref. No. prEN ISO 1456:2008: E
worldwide for CEN national Members.

---------------------- Page: 2 ----------------------
prEN ISO 1456:2008 (E)
Contents Page
Foreword.3

2

---------------------- Page: 3 ----------------------
prEN ISO 1456:2008 (E)
Foreword
This document (prEN ISO 1456:2008) has been prepared by Technical Committee ISO/TC 107 "Metallic and
other inorganic coatings" in collaboration with Technical Committee CEN/TC 262 “Metallic and other inorganic
coatings” the secretariat of which is held by BSI.
This document is currently submitted to the parallel Enquiry.
This document will supersede EN 12540:2000.
Endorsement notice
The text of ISO/DIS 1456:2008 has been approved by CEN as a prEN ISO 1456:2008 without any
modification.

3

---------------------- Page: 4 ----------------------
DRAFT INTERNATIONAL STANDARD ISO/DIS 1456
ISO/TC 107/SC 3 Secretariat: KATS
Voting begins on: Voting terminates on:
2008-02-21 2008-07-21
INTERNATIONAL ORGANIZATION FOR STANDARDIZATION • МЕЖДУНАРОДНАЯ ОРГАНИЗАЦИЯ ПО СТАНДАРТИЗАЦИИ • ORGANISATION INTERNATIONALE DE NORMALISATION
Metallic and other inorganic coatings — Electrodeposited
coatings of nickel, nickel plus chromium and of copper plus
nickel plus chromium
Revêtements métalliques et inorganiques — Dépôts électrolytiques de nickel, de nickel plus chrome et de
cuivre plus nickel plus chrome
(Revision of third edition of ISO 1456:2003 and ISO 1458:2002)
ICS 25.220.40

ISO/CEN PARALLEL ENQUIRY
The CEN Secretary-General has advised the ISO Secretary-General that this ISO/DIS covers a subject
of interest to European standardization. In acco
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.