Adhesives for thermoplastic piping systems — Part 2: Determination of shear strength

Adhésifs pour réseaux de tuyauteries en matières thermoplastiques — Partie 2: Détermination de la résistance au cisaillement

General Information

Status
Withdrawn
Publication Date
28-Aug-2002
Withdrawal Date
28-Aug-2002
Current Stage
9599 - Withdrawal of International Standard
Completion Date
09-Aug-2011
Ref Project

Relations

Buy Standard

Standard
ISO 9311-2:2002 - Adhesives for thermoplastic piping systems
English language
6 pages
sale 15% off
Preview
sale 15% off
Preview

Standards Content (Sample)

INTERNATIONAL ISO
STANDARD 9311-2
First edition
2002-08-15

Adhesives for thermoplastic piping
systems —
Part 2:
Determination of shear strength
Adhésifs pour réseaux de tuyauteries en matières thermoplastiques —
Partie 2: Détermination de la résistance au cisaillement




Reference number
ISO 9311-2:2002(E)
©
ISO 2002

---------------------- Page: 1 ----------------------
ISO 9311-2:2002(E)
PDF disclaimer
This PDF file may contain embedded typefaces. In accordance with Adobe's licensing policy, this file may be printed or viewed but
shall not be edited unless the typefaces which are embedded are licensed to and installed on the computer performing the editing. In
downloading this file, parties accept therein the responsibility of not infringing Adobe's licensing policy. The ISO Central Secretariat
accepts no liability in this area.
Adobe is a trademark of Adobe Systems Incorporated.
Details of the software products used to create this PDF file can be found in the General Info relative to the file; the PDF-creation
parameters were optimized for printing. Every care has been taken to ensure that the file is suitable for use by ISO member bodies. In
the unlikely event that a problem relating to it is found, please inform the Central Secretariat at the address given below.


©  ISO 2002
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or by any means,
electronic or mechanical, including photocopying and microfilm, without permission in writing from either ISO at the address below or
ISO's member body in the country of the requester.
ISO copyright office
Case postale 56 • CH-1211 Geneva 20
Tel. + 41 22 749 01 11
Fax + 41 22 749 09 47
E-mail copyright@iso.org
Web www.iso.org
Published in Switzerland

ii © ISO 2002 – All rights reserved

---------------------- Page: 2 ----------------------
ISO 9311-2:2002(E)
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies
(ISO member bodies). The work of preparing International Standards is normally carried out through ISO
technical committees. Each member body interested in a subject for which a technical committee has been
established has the right to be represented on that committee. International organizations, governmental and
non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the
International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization.
International Standards are drafted in accordance with the rules given in the ISO/IEC Directives, Part 2.
The main task of technical committees is to prepare International Standards. Draft International Standards
adopted by the technical committees are circulated to the member bodies for voting. Publication as an
International Standard requires approval by at least 75 % of the member bodies casting a vote.
Attention is drawn to the possibility that some of the elements of this part of ISO 9311 may be the subject of
patent rights. ISO shall not be held responsible for identifying any or all such patent rights.
ISO 9311-2 was prepared by the European Committee for Standardization (CEN) in collaboration with
Technical Committee ISO/TC 138, Plastics pipes, fittings and valves for the transport of fluids, Subcommittee
SC 5, General properties of pipes, fittings and valves of plastic materials and their accessories — Test
methods and basic specifications, in accordance with the Agreement on technical cooperation between ISO
and CEN (Vienna Agreement).
Throughout the text of this document, read ".this European Standard." to mean ".this International
Standard.".
ISO 9311 consists of the following parts, under the general title Adhesives for thermoplastic piping systems:
— Part 1: Determination of film properties
— Part 2: Determination of shear strength
— Part 3: Test method for the determination of resistance to internal pressure

© ISO 2002 – All rights reserved iii

---------------------- Page: 3 ----------------------
ISO 9311-2:2002(E)


Contents
page
Foreword. v
Introduction . vi
1 Scope . 1
2 Normative references . 1
3 Terms and definitions. 1
4 Principle. 1
5 Safety . 1
6 Apparatus . 1
7 Sampling. 1
8 Procedure . 2
9 Expression of results . 2
10 Test report . 3
iv © ISO 2002 – All rights reserved

---------------------- Page: 4 ----------------------
ISO 9311-2:2002(E)

Foreword

This document (EN ISO 9311-2:2002) has been prepared by Technical Committee CEN/TC 193 "Adhesives", the
secretariat of which is held by AENOR, in collaboration with Technical Committee ISO/TC 61 “Plastics".
This European Standard shall be given the status of a national standard, either by publication of an identical text or
by endorsement, at the latest by January 2003, and conflicting national standards shall be withdrawn at the latest
by January 2003.
This European Standard is one of a series of standards as listed below :
- prEN ISO 9311-1 Adhesives for thermoplastic piping systems - Part 1 : Determination of film properties
(ISO/FDIS 9311-1:2001).
- prEN ISO 9311-2 Adhesives for thermoplastic piping systems - Part 2 : Determination o
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.