Rubber, vulcanized or thermoplastic — Determination of density

This document specifies two methods of test for the determination of the density of solid vulcanized and thermoplastic rubbers. Such determinations are of importance in the control of the quality of a rubber compound and in the calculation of the mass of rubber required to produce a given volume of material. This document does not cover the determination of the relative density of rubber, which is the ratio of the mass of a given volume of rubber to the mass of an equal volume of pure water at a given temperature.

Caoutchouc vulcanisé ou thermoplastique — Détermination de la masse volumique

Le présent document spécifie deux méthodes d'essai pour la détermination de la masse volumique de caoutchouc vulcanisé ou thermoplastique compact. De telles déterminations sont importantes pour le contrôle de la qualité d'un mélange de caoutchoucs et pour le calcul de la masse de caoutchouc nécessaire pour produire un volume donné de matériau. Le présent document ne couvre pas la détermination de la densité du caoutchouc, qui est le rapport de la masse d'un volume donné de caoutchouc à la masse d'un volume égal d'eau pure à une température donnée.

General Information

Status
Published
Publication Date
24-Jun-2018
Current Stage
9093 - International Standard confirmed
Completion Date
04-Jan-2024
Ref Project

Relations

Buy Standard

Standard
ISO 2781:2018 - Rubber, vulcanized or thermoplastic -- Determination of density
English language
10 pages
sale 15% off
Preview
sale 15% off
Preview
Standard
ISO 2781:2018 - Caoutchouc vulcanisé ou thermoplastique -- Détermination de la masse volumique
French language
11 pages
sale 15% off
Preview
sale 15% off
Preview

Standards Content (Sample)

INTERNATIONAL ISO
STANDARD 2781
Fifth edition
2018-06
Rubber, vulcanized or thermoplastic —
Determination of density
Caoutchouc vulcanisé ou thermoplastique — Détermination de la
masse volumique
Reference number
ISO 2781:2018(E)
©
ISO 2018

---------------------- Page: 1 ----------------------
ISO 2781:2018(E)

COPYRIGHT PROTECTED DOCUMENT
© ISO 2018
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may
be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting
on the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address
below or ISO’s member body in the country of the requester.
ISO copyright office
CP 401 • Ch. de Blandonnet 8
CH-1214 Vernier, Geneva
Phone: +41 22 749 01 11
Fax: +41 22 749 09 47
Email: copyright@iso.org
Website: www.iso.org
Published in Switzerland
ii © ISO 2018 – All rights reserved

---------------------- Page: 2 ----------------------
ISO 2781:2018(E)

Contents Page
Foreword .iv
1 Scope . 1
2 Normative references . 1
3 Terms and definitions . 1
4 Principle . 1
5 Test apparatus . 2
6 Test piece . 2
7 Calibration . 2
8 Time-interval between forming and testing . 2
9 Conditioning of test pieces . 3
10 Temperature of test . 3
11 Procedure. 3
11.1 Preparation of sample. 3
11.2 Method A . 3
11.3 Method B . 4
12 Expression of results . 4
12.1 Method A . 4
12.2 Method B .
...

NORME ISO
INTERNATIONALE 2781
Cinquième édition
2018-06
Caoutchouc vulcanisé ou
thermoplastique — Détermination de
la masse volumique
Rubber, vulcanized or thermoplastic — Determination of density
Numéro de référence
ISO 2781:2018(F)
©
ISO 2018

---------------------- Page: 1 ----------------------
ISO 2781:2018(F)

DOCUMENT PROTÉGÉ PAR COPYRIGHT
© ISO 2018
Tous droits réservés. Sauf prescription différente ou nécessité dans le contexte de sa mise en œuvre, aucune partie de cette
publication ne peut être reproduite ni utilisée sous quelque forme que ce soit et par aucun procédé, électronique ou mécanique,
y compris la photocopie, ou la diffusion sur l’internet ou sur un intranet, sans autorisation écrite préalable. Une autorisation peut
être demandée à l’ISO à l’adresse ci-après ou au comité membre de l’ISO dans le pays du demandeur.
ISO copyright office
Case postale 401 • Ch. de Blandonnet 8
CH-1214 Vernier, Genève
Tél.: +41 22 749 01 11
Fax: +41 22 749 09 47
E-mail: copyright@iso.org
Web: www.iso.org
Publié en Suisse
ii © ISO 2018 – Tous droits réservés

---------------------- Page: 2 ----------------------
ISO 2781:2018(F)

Sommaire Page
Avant-propos .iv
1 Domaine d'application . 1
2 Références normatives . 1
3 Termes et définitions . 1
4 Principe . 2
5 Appareillage . 2
6 Éprouvette . 2
7 Étalonnage . 2
8 Délai entre vulcanisation et essai . 2
9 Conditionnement des éprouvettes . 3
10 Température d'essai . 3
11 Mode opératoire. 3
11.1 Préparation de l'échantillon . 3
11.2 Méthode A . 3
11.3 Méthode B . 4
12 Expression des résultats. 4
12.1 Méthode A . 4
12.2 Méthode B . 6
13
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.