ISO/TR 16497-1:2024
(Main)Sustainable mobility and transportation — Sustainable mobility services — Part 1: Use cases
Sustainable mobility and transportation — Sustainable mobility services — Part 1: Use cases
This document compiles use cases for the implementation of sustainable mobility services. The collected data will be analysed to identify issues for international standardization. This document focuses on use cases that aim to implement sustainable transport services. The use cases considered are at the city scale or metropolitan scale, aligned with the scope of smart cities and communities. The use cases encompass land transport, water transport, and air transport for both passengers and freight. Ideas related to connection and integration, including demand-side, supply-side, and policy framework aspects, are included.
Mobilité et transports durables — Services de mobilité durable — Partie 1: Cas d'utilisation
General Information
Buy Standard
Standards Content (Sample)
FINAL
TECHNICAL ISO/DTR
DRAFT
REPORT 16497-1
ISO/TC 268/SC 2
Sustainable mobility and
Secretariat: JISC
transportation — Sustainable mobility
Voting begins on:
2023-09-22 services —
Voting terminates on:
Part 1:
2023-11-17
Use cases
RECIPIENTS OF THIS DRAFT ARE INVITED TO
SUBMIT, WITH THEIR COMMENTS, NOTIFICATION
OF ANY RELEVANT PATENT RIGHTS OF WHICH
THEY ARE AWARE AND TO PROVIDE SUPPOR TING
DOCUMENTATION.
IN ADDITION TO THEIR EVALUATION AS
Reference number
BEING ACCEPTABLE FOR INDUSTRIAL, TECHNO-
ISO/DTR 16497-1:2023(E)
LOGICAL, COMMERCIAL AND USER PURPOSES,
DRAFT INTERNATIONAL STANDARDS MAY ON
OCCASION HAVE TO BE CONSIDERED IN THE
LIGHT OF THEIR POTENTIAL TO BECOME STAN-
DARDS TO WHICH REFERENCE MAY BE MADE IN
NATIONAL REGULATIONS. © ISO 2023
---------------------- Page: 1 ----------------------
ISO/DTR 16497-1:2023(E)
FINAL
TECHNICAL ISO/DTR
DRAFT
REPORT 16497-1
ISO/TC 268/SC 2
Sustainable mobility and
Secretariat: JISC
transportation — Sustainable mobility
Voting begins on:
services —
Voting terminates on:
Part 1:
Use cases
COPYRIGHT PROTECTED DOCUMENT
© ISO 2023
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may
be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting on
the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address below
or ISO’s member body in the country of the requester.
RECIPIENTS OF THIS DRAFT ARE INVITED TO
ISO copyright office
SUBMIT, WITH THEIR COMMENTS, NOTIFICATION
OF ANY RELEVANT PATENT RIGHTS OF WHICH
CP 401 • Ch. de Blandonnet 8
THEY ARE AWARE AND TO PROVIDE SUPPOR TING
CH-1214 Vernier, Geneva
DOCUMENTATION.
Phone: +41 22 749 01 11
IN ADDITION TO THEIR EVALUATION AS
Reference number
Email: copyright@iso.org
BEING ACCEPTABLE FOR INDUSTRIAL, TECHNO-
ISO/DTR 16497-1:2023(E)
Website: www.iso.org
LOGICAL, COMMERCIAL AND USER PURPOSES,
DRAFT INTERNATIONAL STANDARDS MAY ON
Published in Switzerland
OCCASION HAVE TO BE CONSIDERED IN THE
LIGHT OF THEIR POTENTIAL TO BECOME STAN-
DARDS TO WHICH REFERENCE MAY BE MADE IN
ii
© ISO 2023 – All rights reserved
NATIONAL REGULATIONS. © ISO 2023
---------------------- Page: 2 ----------------------
ISO/DTR 16497-1:2023(E)
Contents Page
Foreword .iv
Introduction .v
1 Scope . 1
2 Normative references . 1
3 Terms and definitions . 1
4 Use case collection . 1
5 Use case analysis . 1
6 Subjects for standardization . 1
6.1 General . 1
6.2 Policy making and planning . 2
6.2.1 General . 2
6.2.2 Policy goals and objectives . 2
6.2.3 Environment .
...
© ISO 2023
– All rights reserved
ISO/DTR 16497-1:2023(E)
ISO/TC 268/SC 2/WG 2
July 11th, 2023
Secretariat: JISC
Date: 2023-09-06
Sustainable mobility and transportation - — Sustainable mobility
services —
Part 1:
Use cases
DTRFDIS stage
Warning for WDs and CDs
This document is not an ISO International Standard. It is distributed for review and comment. It is subject to
change without notice and may not be referred to as an International Standard.
© ISO 2023 – All rights reserved
---------------------- Page: 1 ----------------------
ISO #####-#:####(X)
Recipients of this draft are invited to submit, with their comments, notification of any relevant patent rights of
which they are aware and to provide supporting documentation.
A model manuscript of a draft International Standard (known as “The Rice Model”) is available at
https://www.iso.org/iso/model_document-rice_model.pdf
2 © ISO #### – All rights reserved
---------------------- Page: 2 ----------------------
ISO/DTR 16497-1:2023(E)
© ISO 2023
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this
publication may be reproduced or utilized otherwise in any form or by any means, electronic or mechanical,
including photocopying, or posting on the internet or an intranet, without prior written permission. Permission can
be requested from either ISO at the address below or ISO’s member body in the country of the requester.
ISO copyright office
CP 401 • Ch. de Blandonnet 8
CH-1214 Vernier, Geneva
Phone: + 41 22 749 01 11
EmailE-mail: copyright@iso.org
Website: www.iso.orgwww.iso.org
Published in Switzerland
© ISO 2023 – All rights reserved iii
---------------------- Page: 3 ----------------------
ISO/DTR 16497-1:2023(E)
iv © ISO 2023 – All rights reserved
---------------------- Page: 4 ----------------------
ISO/DTR 16497-1:2023(E)
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards
bodies (ISO member bodies). The work of preparing International Standards is normally carried out
through ISO technical committees. Each member body interested in a subject for which a technical
committee has been established has the right to be represented on that committee. International
organizations, governmental and non-governmental, in liaison with ISO, also take part in the work. ISO
collaborates closely with the International Electrotechnical Commission (IEC) on all matters of
electrotechnical standardization.
The procedures used to develop this document and those intended for its further maintenance are
described in the ISO/IEC Directives, Part 1. In particular, the different approval criteria needed for the
different types of ISO documentsdocument should be noted. This document was drafted in accordance
with the editorial rules of the ISO/IEC Directives, Part 2 (see www.iso.org/directives).
Field Code Changed
Attention is drawnISO draws attention to the possibility that some of the elementsimplementation of this
document may beinvolve the subjectuse of (a) patent(s). ISO takes no position concerning the evidence,
validity or applicability of any claimed patent rights. in respect thereof. As of the date of publication of
this document, ISO had not received notice of (a) patent(s) which may be required to implement this
document. However, implementers are cautioned that this may not represent the latest information,
which may be obtained from the patent database available at www.iso.org/patents. ISO shall not be held
responsible for identifying any or all such patent rights. Details of any patent rights identified during the
development of the document will be in the Introduction and/or on the ISO list of patent declarations
received (see www.iso.org/patents).
Any trade name used in this document is information given for the convenience of users and does not
constitute an endorsement.
For an explanation of the voluntary nature of standards, the meaning of ISO specific terms and
expressions related to conformity assessment, as well as information about ISO's adherence to the World
Trade Organization (WTO) principles in the Technical Barriers to Trade (TBT), see
www.iso.org/iso/foreword.htmlwww.iso.org/iso/foreword.html.
This document was prepared by Technical Committee ISO/TC 268, Sustainable cities and communities,
SC2Subcommittee SC2, Sustainable cities and communities - Sustainable mobility and transportation.
A list of all parts in the ISO 16497 series can be found on the ISO website.
Any feedback or questions on this document should be directed to the user’s national standards body. A
complete listing of these bodies can be found at www.iso.org/members.html.
© ISO 2023 – All rights reserved v
---------------------- Page: 5 ----------------------
ISO/DTR 16497-1:2023(E)
Introduction
This document, titled as “Sustainable mobility and transportation -S
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.