ISO 2113:2023
(Main)Reinforcement fibres — Woven fabrics — Requirements and specifications
Reinforcement fibres — Woven fabrics — Requirements and specifications
This document provides characteristics and requirements to create specifications of fabrics woven from yarns (including single yarns, multiple-wound yarns, plied yarns, cabled yarns and rovings) made from textile glass, carbon or aramid and generally used for plastics reinforcements. This document does not cover all requirements for some specialized applications.
Fibres de renfort — Tissus — Exigences et spécifications
La présente Norme internationale fixe une base de spécification applicable aux tissus constitués de fils (incluant les fils simples, assemblés, retors, câblés et stratifils) réalisés à partir du verre textile, carbone ou aramide) et généralement utilisés pour le renforcement des plastiques. La présente Norme internationale ne spécifie pas toutes les caractéristiques exigées pour certaines applications spéciales. Si de telles caractéristiques supplémentaires sont nécessaires, elles sont ou seront données dans d'autres Normes internationales appropriées.
General Information
Relations
Standards Content (Sample)
INTERNATIONAL ISO
STANDARD 2113
Third edition
2023-06
Reinforcement fibres — Woven fabrics
— Requirements and specifications
Fibres de renfort — Tissus — Exigences et spécifications
Reference number
ISO 2113:2023(E)
© ISO 2023
---------------------- Page: 1 ----------------------
ISO 2113:2023(E)
COPYRIGHT PROTECTED DOCUMENT
© ISO 2023
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may
be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting on
the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address below
or ISO’s member body in the country of the requester.
ISO copyright office
CP 401 • Ch. de Blandonnet 8
CH-1214 Vernier, Geneva
Phone: +41 22 749 01 11
Email: copyright@iso.org
Website: www.iso.org
Published in Switzerland
ii
© ISO 2023 – All rights reserved
---------------------- Page: 2 ----------------------
ISO 2113:2023(E)
Contents Page
Foreword .iv
Introduction .v
1 Scope . 1
2 Normative references . 1
3 Terms and definitions . 1
4 Types — Technical description of woven reinforcement fabrics . 2
5 Sampling and number of test specimens . 3
6 Conditioning . 3
7 Characteristics and test methods . 3
7.1 General . 3
7.2 Characteristics to be specified . 3
7.2.1 Construction characteristics . 3
7.2.2 Physical characteristics of fabric . 4
7.2.3 Surface treatment . 5
7.2.4 Tracer yarn . 5
7.2.5 Mechanical characteristics . 6
7.3 Defects . 6
7.3.1 General . 6
7.3.2 Warp defects . 6
7.3.3 Weft defects . 6
7.3.4 Defects of either warp or weft . 7
7.3.5 Surface-treatment defects . 7
7.3.6 Other defects . 7
8 Packaging, packing and ordering . 7
8.1 Packaging and packing . 7
8.2 Information for ordering . 8
9 Storage . 8
iii
© ISO 2023 – All rights reserved
---------------------- Page: 3 ----------------------
ISO 2113:2023(E)
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards
bodies (ISO member bodies). The work of preparing International Standards is normally carried out
through ISO technical committees. Each member body interested in a subject for which a technical
committee has been established has the right to be represented on that committee. International
organizations, governmental and non-governmental, in liaison with ISO, also take part in the work.
ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of
electrotechnical standardization.
The procedures used to develop this document and those intended for its further maintenance are
described in the ISO/IEC Directives, Part 1. In particular, the different approval criteria needed for the
different types of ISO document should be noted. This document was drafted in accordance with the
editorial rules of the ISO/IEC Directives, Part 2 (see www.iso.org/directives).
ISO draws attention to the possibility that the implementation of this document may involve the use
of (a) patent(s). ISO takes no position concerning the evidence, validity or applicability of any claimed
patent rights in respect thereof. As of the date of publication of this document, ISO had not received
notice of (a) patent(s) which may be required to implement this document. However, implementers are
cautioned that this may not represent the latest information, which may be obtained from the patent
database available at www.iso.org/patents. ISO shall not be held responsible for identifying any or all
such patent rights.
Any trade name used in this document is information given for the convenience of users and does not
constitute an endorsement.
For an explanation of the voluntary nature of standards, the meaning of ISO specific terms and
expressions related to conformity assessment, as well as information about ISO's adherence to
the World Trade Organization (WTO) principles in the Technical Barriers to Trade (TBT), see
www.iso.org/iso/foreword.html.
This document was prepared by Technical Committee ISO/TC 61, Plastics, Subcommittee SC 13,
Composites and reinforcement fibres.
This third edition cancels and replaces the second edition (ISO 2113:1996), which has been technically
revised. It also incorporates the Technical Corrigendum ISO 2113:1996/Cor 1:2003.
The main changes are as follows:
— Clause 2 has been updated with new references added and others deleted;
— some editorial changes have been made.
Any feedback or questions on this document should be directed to the user’s national standards body. A
complete listing of these bodies can be found at www.iso.org/members.html.
iv
© ISO 2023 – All rights reserved
---------------------- Page: 4 ----------------------
ISO 2113:2023(E)
Introduction
A specification is intended to "specify" the standardized object by providing verifiable requirements,
and its necessary elements include "requirements" and "verification methods". It should enumerate as
completely as possible the points that should be considered at the time of drafting the specification.
The specification, therefore, can be used as the basis for procurement and trade, the basis for judging the
conformity of products, processes or services, and the benchmark for self-declaration and certification.
v
© ISO 2023 – All rights reserved
---------------------- Page: 5 ----------------------
INTERNATIONAL STANDARD ISO 2113:2023(E)
Reinforcement fibres — Woven fabrics — Requirements
and specifications
1 Scope
This document provides characteristics and requirements to create specifications of fabrics woven
from yarns (including single yarns, multiple-wound yarns, plied yarns, cabled yarns and rovings) made
from textile glass, carbon or aramid and generally used for plastics reinforcements.
This document does not cover all requirements for some specialized applications.
2 Normative references
The following documents are referred to in the text in such a way that some or all of their content
constitutes requirements of this document. For dated references, only the edition cited applies. For
undated references, the latest edition of the referenced document (including any amendments) applies.
ISO 291, Plastics — Standard atmospheres for conditioning and testing
ISO 1887, Textile glass — Determination of combustible-matter content
ISO 2078, Textile glass — Yarns — Designation
ISO 2797, Textile glass — Rovings — Basis for a specification
ISO 2859-1, Sampling procedures for inspection by attributes — Part 1: Sampling schemes indexed by
acceptance quality limit (AQL) for lot-by-lot inspection
ISO 3374, Reinforcement products — Mats and fabrics — Determination of mass per unit area
ISO 3598, Textile glass — Yarns — Basis for a specification
ISO 3951-1, Sampling procedures for inspection by variables — Part 1: Specification for single sampling
plans indexed by acceptance quality limit (AQL) for lot-by-lot inspection for a single quality characteristic
and a single AQL
ISO 4602, Reinforcements — Woven fabrics — Determination of number of yarns per unit length of warp
and weft
ISO 4603, Textile glass — Woven fabrics — Determination of thickness
ISO 4604, Reinforcement fabrics — Determination of conventional flexural stiffness — Fixed-angle
flexometer method
ISO 4606, Textile glass — Woven fabric — Determination of tensile breaking force and elongation at break
by the strip method
ISO 5025, Reinforcement products — W
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.