Textile machinery — Safety requirements — Part 3: Nonwoven machinery — Amendment 2

Matériel pour l'industrie textile — Exigences de sécurité — Partie 3: Machines de production de nontissés — Amendement 2

General Information

Status
Published
Publication Date
18-May-2016
Current Stage
6060 - International Standard published
Due Date
13-Nov-2016
Completion Date
19-May-2016
Ref Project

Relations

Buy Standard

Standard
ISO 11111-3:2005/Amd 2:2016
English language
3 pages
sale 15% off
Preview
sale 15% off
Preview
Standard
ISO 11111-3:2005/Amd 2:2016
French language
4 pages
sale 15% off
Preview
sale 15% off
Preview

Standards Content (Sample)

INTERNATIONAL ISO
STANDARD 11111-3
First edition
2005-02-15
AMENDMENT 2
2016-05-15
Textile machinery — Safety
requirements —
Part 3:
Nonwoven machinery
AMENDMENT 2
Matériel pour l’industrie textile — Exigences de sécurité —
Partie 3: Machines de production de nontissés
AMENDEMENT 2
Reference number
ISO 11111-3:2005/Amd.2:2016(E)
©
ISO 2016

---------------------- Page: 1 ----------------------
ISO 11111-3:2005/Amd.2:2016(E)

COPYRIGHT PROTECTED DOCUMENT
© ISO 2016, Published in Switzerland
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized otherwise in any form
or by any means, electronic or mechanical, including photocopying, or posting on the internet or an intranet, without prior
written permission. Permission can be requested from either ISO at the address below or ISO’s member body in the country of
the requester.
ISO copyright office
Ch. de Blandonnet 8 • CP 401
CH-1214 Vernier, Geneva, Switzerland
Tel. +41 22 749 01 11
Fax +41 22 749 09 47
copyright@iso.org
www.iso.org
ii © ISO 2016 – All rights reserved

---------------------- Page: 2 ----------------------
ISO 11111-3:2005/Amd.2:2016(E)

Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards
bodies (ISO member bodies). The work of preparing International Standards is normally carried out
through ISO technical committees. Each member body interested in a subject for which a technical
committee has been established has the right to be represented on that committee. International
organizations, governmental and non-governmental, in liaison with ISO, also take part in the work.
ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of
electrotechnical standardization.
The procedures used to develop this document and those intended for its further maintenance are
described in the ISO/IEC Directives, Part 1. In particular the different approval criteria needed for the
different types of ISO documents should be noted. This document was drafted in accordance with the
editorial rules of the ISO/IEC Directives, Part 2 (see www.iso.org/directives).
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. ISO shall not be held responsible for identifying any or all such patent rights. Details of
any patent rights identified during the development of the document will be in the Introduction and/or
on the ISO list of patent declarations received (see www.iso.org/patents).
Any trade name used in this document is information given for the convenience of users and does not
constitute an endorsement.
For an explanation on the meaning of ISO specific terms and expressions related to conformity
assessment, as well as information about ISO’s adherence to the WTO principles in the Technical
Barriers to Trade (TBT) see the following URL: Foreword - Supplementary information.
The committee responsible for this document is ISO/TC 72, Textile machinery and accessories,
Subcommittee SC 8, Safety requirements for textile machinery.
© ISO 2016 – All rights reserved iii

---------------------- Page: 3 ----------------------
ISO 11111-3:2005/Amd.2:2016(E)
Textile machinery — Safety requirements —
Part 3:
Nonwoven machinery
AMENDMENT 2
Page v, Introduction
Replace “ISO 12100-1” in the 3rd paragraph with “ISO 12100”.
Replace “ISO 14121-1” in the 5th paragraph with “ISO 12100”.
Page 1, Scope
Add the following sentence as the second paragraph:
This part of ISO 11111 is complemented by the type C standards ISO 9902-series with respect to
noise emission measurement and ISO 23771 with respect to measures for the reduction of noise
emissions.
Pages 1 to 4, Clauses 1 to 7
Throughout the text, replace all the dated references “ISO 11111-1:2005” with “ISO 11111-1:2016”.
Replace all the dated references to “ISO 11111-2:2005” with “ISO 11111-2:2005 (as amended by
ISO 11111-2:2005/Amd.1:2009 and ISO 11111-2:2005/Amd.2:2016)”.
Replace all the dated references to “ISO 11111-6
...

NORME ISO
INTERNATIONALE 11111-3
Première édition
2005-02-15
AMENDEMENT 2
2016-05-15
Matériel pour l’industrie textile —
Exigences de sécurité —
Partie 3:
Machines de production de nontissés
AMENDEMENT 2
Textile machinery — Safety requirements —
Part 3: Nonwoven machinery
AMENDMENT 2
Numéro de référence
ISO 11111-3:2005/Amd.2:2016(F)
©
ISO 2016

---------------------- Page: 1 ----------------------
ISO 11111-3:2005/Amd.2:2016(F)

DOCUMENT PROTÉGÉ PAR COPYRIGHT
© ISO 2016, Publié en Suisse
Droits de reproduction réservés. Sauf indication contraire, aucune partie de cette publication ne peut être reproduite ni utilisée
sous quelque forme que ce soit et par aucun procédé, électronique ou mécanique, y compris la photocopie, l’affichage sur
l’internet ou sur un Intranet, sans autorisation écrite préalable. Les demandes d’autorisation peuvent être adressées à l’ISO à
l’adresse ci-après ou au comité membre de l’ISO dans le pays du demandeur.
ISO copyright office
Ch. de Blandonnet 8 • CP 401
CH-1214 Vernier, Geneva, Switzerland
Tel. +41 22 749 01 11
Fax +41 22 749 09 47
copyright@iso.org
www.iso.org
ii © ISO 2016 – Tous droits réservés

---------------------- Page: 2 ----------------------
ISO 11111-3:2005/Amd.2:2016(F)

Avant-propos
L’ISO (Organisation internationale de normalisation) est une fédération mondiale d’organismes
nationaux de normalisation (comités membres de l’ISO). L’élaboration des Normes internationales est
en général confiée aux comités techniques de l’ISO. Chaque comité membre intéressé par une étude
a le droit de faire partie du comité technique créé à cet effet. Les organisations internationales,
gouvernementales et non gouvernementales, en liaison avec l’ISO participent également aux travaux.
L’ISO collabore étroitement avec la Commission électrotechnique internationale (IEC) en ce qui
concerne la normalisation électrotechnique.
Les procédures utilisées pour élaborer le présent document et celles destinées à sa mise à jour sont
décrites dans les Directives ISO/IEC, Partie 1. Il convient, en particulier de prendre note des différents
critères d’approbation requis pour les différents types de documents ISO. Le présent document a été
rédigé conformément aux règles de rédaction données dans les Directives ISO/IEC, Partie 2 (voir www.
iso.org/directives).
L’attention est appelée sur le fait que certains des éléments du présent document peuvent faire l’objet de
droits de propriété intellectuelle ou de droits analogues. L’ISO ne saurait être tenue pour responsable
de ne pas avoir identifié de tels droits de propriété et averti de leur existence. Les détails concernant
les références aux droits de propriété intellectuelle ou autres droits analogues identifiés lors de
l’élaboration du document sont indiqués dans l’Introduction et/ou dans la liste des déclarations de
brevets reçues par l’ISO (voir www.iso.org/brevets).
Les appellations commerciales éventuellement mentionnées dans le présent document sont données
pour information, par souci de commodité, à l’intention des utilisateurs et ne sauraient constituer un
engagement.
Pour une explication de la signification des termes et expressions spécifiques de l’ISO liés à
l’évaluation de la conformité, ou pour toute information au sujet de l’adhésion de l’ISO aux principes
de l’OMC concernant les obstacles techniques au commerce (OTC), voir le lien suivant: Avant-propos —
Informations supplémentaires.
Le comité chargé de l’élaboration du présent document est l'ISO/TC 72, Matériel pour l’industrie textile
et matériel connexe, sous-comité SC 8, Exigences de sécurité pour le matériel textile.
© ISO 2016 – Tous droits réservés iii

---------------------- Page: 3 ----------------------
ISO 11111-3:2005/Amd.2:2016(F)
Matériel pour l’industrie textile — Exigences de sécurité —
Partie 3:
Machines de production de nontissés
AMENDEMENT 2
Page v, Introduction
ème
Remplacer la référence «ISO 12100-1» dans le 3 alinéa par la référence «ISO 12100».
ème
Remplacer la référence «ISO 14121-1» dans le 5 alinéa par la référence «ISO 12100».
Page 1, Domaine d’application
Ajouter la phrase suivante comme deuxième alinéa:
La présente partie de l’ISO 11111 est complétée par les normes de type C ISO 9902-serie en ce
qui concerne les mesures de bruit et ISO 23771 en ce qui concerne les mesures de réduction de
l’émission sonore.
Pages 1 à 5, Articles 1 à 7
Dans l’ensemble du texte, remplacer toutes les références datées «ISO 11111-1:2005» par la référence
«ISO 11111-1:2016».
Remplacer toutes les références datées «ISO 11111-2:2005» par «ISO 11111-2:2005 (amendé par
l’ISO 11111-2:2005/Amd.1:2009 et par l’ISO 11111-2:2005/Amd.2:2016)».
Remplacer toutes les références datées «ISO 11111-6:2005» par «ISO 11111-6:2005 (amendé par
l’ISO 11111-6:2005/A
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.