ISO 630-5:2023
(Main)Structural steels — Part 5: Technical delivery conditions for structural steels with improved atmospheric corrosion resistance
Structural steels — Part 5: Technical delivery conditions for structural steels with improved atmospheric corrosion resistance
This document specifies qualities for flat and long products of hot-rolled structural steels with improved atmospheric corrosion resistance in the as-rolled, normalized/normalized rolled, thermomechanical control processed and quenched and tempered delivery conditions. It is applicable to steel plates rolled on a reversing mill, wide flats, hot-rolled sections and bars, which are intended for use in welded or bolted structures. This document covers 14 grades and 5 qualities. Grades S235, S295, S355, S420, S460, S500 and S550 are covered in Annex A. Grades SG245, SG345, SG365, SG400, SG460, SG500, and SG700 are covered in Annex B. Not all grades are available in all qualities, and some qualities have Charpy V-notch requirements. The steels specified in this document are applicable to hot-rolled plates, wide flats, sections and bars with a maximum nominal thickness of 150 mm for grades S235W, S295W, S355W, S420W, S460W, S500W and S550W, with a maximum nominal thickness of 200 mm for grades SG245, SG345, SG365, SG400, SG460, SG500, and SG700. The steels specified in this document are applicable to hot-rolled plates with a maximum nominal thickness of 20 mm for grades S295WP and S355WP. The steels specified in this document are applicable to hot-rolled wide flats, sections and bars with a maximum nominal thickness of 40 mm for grades S295WP and S355WP. The steels specified in this document are applicable to hot-rolled plates with a maximum nominal thickness of 80 mm for grade S355WSE. This document does not include the following structural steels, some of which are covered by other International Standards. — sheet and strip, e.g. ISO 4995 or ISO 4996; — tubular products. e.g. ISO 12633-1, ISO 12633-2. NOTE In this document, the term of "thickness" is considered as "nominal thickness", unless otherwise stated.
Aciers de construction — Partie 5: Conditions techniques de livraison pour aciers de construction à résistance améliorée à la corrosion atmosphérique
General Information
Relations
Buy Standard
Standards Content (Sample)
INTERNATIONAL ISO
STANDARD 630-5
Second edition
2023-12
Structural steels —
Part 5:
Technical delivery conditions for
structural steels with improved
atmospheric corrosion resistance
Aciers de construction —
Partie 5: Conditions techniques de livraison pour aciers de
construction à résistance améliorée à la corrosion atmosphérique
Reference number
ISO 630-5:2023(E)
© ISO 2023
---------------------- Page: 1 ----------------------
ISO 630-5:2023(E)
COPYRIGHT PROTECTED DOCUMENT
© ISO 2023
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may
be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting on
the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address below
or ISO’s member body in the country of the requester.
ISO copyright office
CP 401 • Ch. de Blandonnet 8
CH-1214 Vernier, Geneva
Phone: +41 22 749 01 11
Email: copyright@iso.org
Website: www.iso.org
Published in Switzerland
ii
© ISO 2023 – All rights reserved
---------------------- Page: 2 ----------------------
ISO 630-5:2023(E)
Contents Page
Foreword .iv
1 Scope . 1
2 Normative references . 1
3 Terms and definitions . 2
4 Classification and designation . 2
4.1 Classification . 2
4.2 Designation (grades and qualities) . 2
5 Information to be supplied by purchaser . 3
5.1 Mandatory information . 3
5.2 Options. 3
6 Requirements . 3
6.1 Steelmaking process . 3
6.2 Delivery condition . 3
6.3 Chemical composition . 3
6.3.1 Heat analysis . 3
6.3.2 Product analysis . 3
6.3.3 Carbon equivalent value . 4
6.4 Mechanical properties . 4
6.4.1 Tensile properties .
...
FINAL
INTERNATIONAL ISO/FDIS
DRAFT
STANDARD 630-5
ISO/TC 17/SC 3
Structural steels —
Secretariat: AFNOR
Voting begins on:
Part 5:
2023-08-25
Technical delivery conditions for
Voting terminates on:
structural steels with improved
2023-10-20
atmospheric corrosion resistance
Aciers de construction —
Partie 5: Conditions techniques de livraison pour aciers de
construction à résistance améliorée à la corrosion atmosphérique
RECIPIENTS OF THIS DRAFT ARE INVITED TO
SUBMIT, WITH THEIR COMMENTS, NOTIFICATION
OF ANY RELEVANT PATENT RIGHTS OF WHICH
THEY ARE AWARE AND TO PROVIDE SUPPOR TING
DOCUMENTATION.
IN ADDITION TO THEIR EVALUATION AS
Reference number
BEING ACCEPTABLE FOR INDUSTRIAL, TECHNO-
ISO/FDIS 630-5:2023(E)
LOGICAL, COMMERCIAL AND USER PURPOSES,
DRAFT INTERNATIONAL STANDARDS MAY ON
OCCASION HAVE TO BE CONSIDERED IN THE
LIGHT OF THEIR POTENTIAL TO BECOME STAN-
DARDS TO WHICH REFERENCE MAY BE MADE IN
NATIONAL REGULATIONS. © ISO 2023
---------------------- Page: 1 ----------------------
ISO/FDIS 630-5:2023(E)
FINAL
INTERNATIONAL ISO/FDIS
DRAFT
STANDARD 630-5
ISO/TC 17/SC 3
Structural steels —
Secretariat: AFNOR
Voting begins on:
Part 5:
Technical delivery conditions for
Voting terminates on:
structural steels with improved
atmospheric corrosion resistance
Aciers de construction —
Partie 5: Conditions techniques de livraison pour aciers de
construction à résistance améliorée à la corrosion atmosphérique
COPYRIGHT PROTECTED DOCUMENT
© ISO 2023
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may
be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting on
the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address below
or ISO’s member body in the country of the requester.
RECIPIENTS OF THIS DRAFT ARE INVITED TO
ISO copyright office
SUBMIT, WITH THEIR COMMENTS, NOTIFICATION
OF ANY RELEVANT PATENT RIGHTS OF WHICH
CP 401 • Ch. de Blandonnet 8
THEY ARE AWARE AND TO PROVIDE SUPPOR TING
CH-1214 Vernier, Geneva
DOCUMENTATION.
Phone: +41 22 749 01 11
IN ADDITION TO THEIR EVALUATION AS
Reference number
Email: copyright@iso.org
BEING ACCEPTABLE FOR INDUSTRIAL, TECHNO-
ISO/FDIS 630-5:2023(E)
Website: www.iso.org
LOGICAL, COMMERCIAL AND USER PURPOSES,
DRAFT INTERNATIONAL STANDARDS MAY ON
Published in Switzerland
OCCASION HAVE TO BE CONSIDERED IN THE
LIGHT OF THEIR POTENTIAL TO BECOME STAN-
DARDS TO WHICH REFERENCE MAY BE MADE IN
ii
© ISO 2023 – All rights reserved
NATIONAL REGULATIONS. © ISO 2023
---------------------- Page: 2 ----------------------
ISO/FDIS 630-5:2023(E)
Contents Page
Foreword .iv
1 Scope . 1
2 Normative references . 1
3 Terms and definitions . 2
4 Classification and designation . 2
4.1 Classification . 2
4.2 Designation (grades and qualities) . 2
5 Information to be supplied by purchaser . 3
5.1 Mandatory information . 3
5.2 Options. 3
6 Requirements .
...
ISO/FDIS 630-5:2023(E)
ISO TC 17/SC 3
Secretariat: AFNOR
Date: 2023-05-03
Structural steels — Part 5: Technical delivery conditions for structural steels with improved
atmospheric corrosion resistance
Aciers de construction —Partie 5: Conditions techniques de livraison pour aciers de construction à
résistance améliorée à la corrosion atmosphérique
---------------------- Page: 1 ----------------------
ISO/FDIS 630-5:2023(E)
© ISO 2023
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no
part of this publication may be reproduced or utilized otherwise in any form or by any means,
electronic or mechanical, including photocopying, or posting on the internet or an intranet, without
prior written permission. Permission can be requested from either ISO at the address below or
ISO’s member body in the country of the requester.
ISO copyright office
CP 401 • Ch. de Blandonnet 8
CH-1214 Vernier, Geneva
Phone: +41 22 749 01 11
Email: copyright@iso.org
Website: www.iso.org
Published in Switzerland
ii © ISO 2023 – All rights reserved
---------------------- Page: 2 ----------------------
ISO/FDIS 630-5:2023(E)
Contents
Foreword . iv
1 Scope . 1
2 Normative references . 1
3 Terms and definitions . 1
4 Classification and designation. 2
4.1 Classification . 2
4.2 Designation (grades and qualities) . 2
4.3 Normative annexes . 2
5 Information to be supplied by purchaser . 2
5.1 Mandatory information . 2
5.2 Options . 2
6 Requirements . 3
6.1 Steelmaking process . 3
6.2 Delivery condition . 3
6.3 Chemical composition . 3
6.3.1 Heat analysis . 3
6.3.2 Product analysis . 3
6.3.3 Carbon equivalent value . 3
6.4 Mechanical properties . 3
6.4.1 Tensile properties . 3
6.4.2 Charpy V-notch impact properties . 3
6.5 Surface conditions . 3
6.6 Internal soundness . 3
6.7 Dimensions, tolerances on dimensions and shape, mass . 4
7 Inspection . 4
8 Sampling — Frequency of testing .
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.