Metallic coatings — Hot dip galvanized coatings on ferrous materials — Gravimetric determination of the mass per unit area

This document specifies a method of determining the mass per unit area of hot dip galvanized coatings on ferrous materials. Since an exact knowledge of the area of the surface is essential, this document is mainly applicable to shapes whose areas are easy to determine. If, with heavy samples, the specifications of Clause 7 cannot be met, then the hot dip galvanized coating mass is determined by another method.

Revêtements métalliques — Revêtements de galvanisation à chaud sur métaux ferreux — Détermination gravimétrique de la masse par unité de surface

Le présent document spécifie une méthode pour la détermination de la masse par unité de surface des revêtements de galvanisation à chaud sur métaux ferreux. La connaissance exacte de l'aire de la surface revêtue de zinc étant indispensable, le présent document est essentiellement applicable aux formes dont les surfaces sont faciles à déterminer. Si, avec des échantillons épais, les spécifications de l'Article 7 ne peuvent être satisfaites, la masse du revêtement de galvanisation à chaud est déterminée au moyen d'une autre méthode.

General Information

Status
Published
Publication Date
13-Sep-2020
Current Stage
6060 - International Standard published
Start Date
14-Sep-2020
Due Date
30-Mar-2021
Completion Date
14-Sep-2020
Ref Project

Relations

Buy Standard

Standard
ISO 1460:2020 - Metallic coatings -- Hot dip galvanized coatings on ferrous materials -- Gravimetric determination of the mass per unit area
English language
3 pages
sale 15% off
Preview
sale 15% off
Preview
Standard
ISO 1460:2020 - Revêtements métalliques -- Revêtements de galvanisation à chaud sur métaux ferreux -- Détermination gravimétrique de la masse par unité de surface
French language
3 pages
sale 15% off
Preview
sale 15% off
Preview

Standards Content (Sample)

INTERNATIONAL ISO
STANDARD 1460
Third edition
2020-09
Metallic coatings — Hot dip galvanized
coatings on ferrous materials —
Gravimetric determination of the
mass per unit area
Revêtements métalliques — Revêtements de galvanisation à chaud
sur métaux ferreux — Détermination gravimétrique de la masse par
unité de surface
Reference number
ISO 1460:2020(E)
©
ISO 2020

---------------------- Page: 1 ----------------------
ISO 1460:2020(E)

COPYRIGHT PROTECTED DOCUMENT
© ISO 2020
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may
be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting
on the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address
below or ISO’s member body in the country of the requester.
ISO copyright office
CP 401 • Ch. de Blandonnet 8
CH-1214 Vernier, Geneva
Phone: +41 22 749 01 11
Email: copyright@iso.org
Website: www.iso.org
Published in Switzerland
ii © ISO 2020 – All rights reserved

---------------------- Page: 2 ----------------------
ISO 1460:2020(E)

Contents Page
Foreword .iv
1 Scope . 1
2 Normative references . 1
3 Terms and definitions . 1
4 Principle . 1
5 Stripping solution . 1
6 Sampling . 1
7 Procedure. 1
8 Expression of results . 2
8.1 Method of calculation . 2
8.2 Reproducibility . 2
9 Test report . 2
© ISO 2020 – All rights reserved iii

---------------------- Page: 3 ----------------------
ISO 1460:2020(E)

Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards
bodies (ISO member bodies). The work of preparing International Standards is normally carried out
through ISO technical committees. Each member body interested in a subject for which a technical
committee has been established has the right to be represented on that committee. International
organizations, governmental and non-governmental, in liaison with ISO, also take part in the work.
ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of
electrotechnical standardization.
The procedures used to develop this document and those intended for its further maintenance are
described in the ISO/IEC Directives, Part 1. In particular, the different approval criteria needed for the
different types of ISO documents should be noted. This document was drafted in accordance with the
editorial rules of the ISO/IEC Directives, Part 2 (see www .iso .org/ directives).
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. ISO shall not be held responsible for identifying any or all such patent rights. Details of
any patent rights identified during the development of the document will be in the Introduction and/or
on the ISO list of patent declarations received (see www .iso .org/ patents).
Any trade name used in this document is information given for the convenience of users and does not
constitute an endorsement.
For an explanation of the voluntary nature of standards, the meaning of ISO specific terms and
expressions related to conformity assessment, as well as information about ISO’s adherence to the
World T
...

NORME ISO
INTERNATIONALE 1460
Troisième édition
2020-09
Revêtements métalliques —
Revêtements de galvanisation à chaud
sur métaux ferreux — Détermination
gravimétrique de la masse par unité
de surface
Metallic coatings — Hot dip galvanized coatings on ferrous materials
— Gravimetric determination of the mass per unit area
Numéro de référence
ISO 1460:2020(F)
©
ISO 2020

---------------------- Page: 1 ----------------------
ISO 1460:2020(F)

DOCUMENT PROTÉGÉ PAR COPYRIGHT
© ISO 2020
Tous droits réservés. Sauf prescription différente ou nécessité dans le contexte de sa mise en œuvre, aucune partie de cette
publication ne peut être reproduite ni utilisée sous quelque forme que ce soit et par aucun procédé, électronique ou mécanique,
y compris la photocopie, ou la diffusion sur l’internet ou sur un intranet, sans autorisation écrite préalable. Une autorisation peut
être demandée à l’ISO à l’adresse ci-après ou au comité membre de l’ISO dans le pays du demandeur.
ISO copyright office
Case postale 401 • Ch. de Blandonnet 8
CH-1214 Vernier, Genève
Tél.: +41 22 749 01 11
E-mail: copyright@iso.org
Web: www.iso.org
Publié en Suisse
ii © ISO 2020 – Tous droits réservés

---------------------- Page: 2 ----------------------
ISO 1460:2020(F)

Sommaire Page
Avant-propos .iv
1 Domaine d’application . 1
2 Références normatives . 1
3 Termes et définitions . 1
4 Principe . 1
5 Réactif de dissolution chimique . 1
6 Échantillonnage . 1
7 Mode opératoire. 1
8 Expression des résultats. 2
8.1 Méthode de calcul . 2
8.2 Reproductibilité . 2
9 Rapport d’essai . 2
© ISO 2020 – Tous droits réservés iii

---------------------- Page: 3 ----------------------
ISO 1460:2020(F)

Avant-propos
L’ISO (Organisation internationale de normalisation) est une fédération mondiale d’organismes
nationaux de normalisation (comités membres de l’ISO). L’élaboration des Normes internationales est
en général confiée aux comités techniques de l’ISO. Chaque comité membre intéressé par une étude
a le droit de faire partie du comité technique créé à cet effet. Les organisations internationales,
gouvernementales et non gouvernementales, en liaison avec l’ISO participent également aux travaux.
L’ISO collabore étroitement avec la Commission électrotechnique internationale (IEC) en ce qui
concerne la normalisation électrotechnique.
Les procédures utilisées pour élaborer le présent document et celles destinées à sa mise à jour sont
décrites dans les Directives ISO/IEC, Partie 1. Il convient, en particulier, de prendre note des différents
critères d’approbation requis pour les différents types de documents ISO. Le présent document a été
rédigé conformément aux règles de rédaction données dans les Directives ISO/IEC, Partie 2 (voir www
.iso. org/d irectives).
L’attention est attirée sur le fait que certains des éléments du présent document peuvent faire l’objet de
droits de propriété intellectuelle ou de droits analogues. L’ISO ne saurait être tenue pour responsable
de ne pas avoir identifié de tels droits de propriété et averti de leur existence. Les détails concernant
les références aux droits de propriété intellectuelle ou autres droits analogues identifiés lors de
l’élaboration du document sont indiqués dans l’Introduction et/ou dans la liste des déclarations de
brevets reçues par l’ISO (voir www. iso. org/br evets).
Les appellations commerciales éventuellement mentionnées dans le présent document sont données
pour information, par souci de commodité, à l’intention des utilisateurs et ne sauraient constituer un
engagement.
Pour une explication de la nature volontaire des normes, la signification des termes et expressions
spécifiques de l’ISO liés à l’évaluation de la conformité, ou pour toute information au sujet de l’adhésion
de l’ISO aux principes de l’Organisation mondiale du commerce (OMC) concernant les obstacles
techniques au commerce (OTC), voir www. iso. org/a vant- propos.
Le présent document a été élaboré par le comité techniq
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.