ISO 3987:2010/Cor 1:2011
(Corrigendum)Petroleum products - Determination of sulfated ash in lubricating oils and additives - Technical Corrigendum 1
Petroleum products - Determination of sulfated ash in lubricating oils and additives - Technical Corrigendum 1
This International Standard describes a procedure for the determination of the mass percentage of sulfated ash from unused lubricating oils containing additives and from additive concentrates used in compounding. These additives usually contain one or more of the following metals: barium, calcium, magnesium, zinc, potassium, sodium and tin. The elements sulfur, phosphorus and chlorine can also be present in combined form. Application of this procedure to sulfated ash levels below 0,02 % (m/m) is restricted to oils containing ashless additives
Produits pétroliers — Détermination des cendres sulfatées dans les huiles lubrifiantes et additifs — Rectificatif technique 1
Naftni proizvodi - Določevanje sulfatnega pepela v mazalnih oljih in aditivih - Tehnični popravek 1
Ta mednarodni standard opisuje postopek za določevanje masnega odstotka sulfatnega pepela iz neuporabljenih mazalnih olj, ki vsebujejo aditive, in iz koncentratov aditivov, ki se uporabljajo pri mešanju. Ti aditivi običajno vsebujejo eno ali več od naslednjih kovin: barij, kalcij, magnezij, cink, kalij, natrij in kositer. Elementi žveplo, fosfor in klor so tudi lahko prisotni v kombinirani obliki. Uporaba tega postopka za ravni sulfatnega pepela pod 0,02 % (m/m) je omejena na olja, ki vsebujejo aditive brez pepela. Spodnja meja uporabnosti tega postopka je 0,005 % (m/m) sulfatnega pepela. The lower limit of applicability of the procedure is 0,005 % (m/m) sulfated ash.
General Information
- Status
- Published
- Publication Date
- 20-Jan-2011
- Technical Committee
- ISO/TC 28 - Petroleum and related products, fuels and lubricants from natural or synthetic sources
- Drafting Committee
- ISO/TC 28/WG 26 - Physio-chemical and inspection tests
- Current Stage
- 9599 - Withdrawal of International Standard
- Start Date
- 16-Sep-2024
- Completion Date
- 13-Dec-2025
Relations
- Corrects
ISO 3987:2010 - Petroleum products - Determination of sulfated ash in lubricating oils and additives - Effective Date
- 26-Nov-2021
- Effective Date
- 06-May-2023
Frequently Asked Questions
ISO 3987:2010/Cor 1:2011 is a corrigendum published by the International Organization for Standardization (ISO). Its full title is "Petroleum products - Determination of sulfated ash in lubricating oils and additives - Technical Corrigendum 1". This standard covers: This International Standard describes a procedure for the determination of the mass percentage of sulfated ash from unused lubricating oils containing additives and from additive concentrates used in compounding. These additives usually contain one or more of the following metals: barium, calcium, magnesium, zinc, potassium, sodium and tin. The elements sulfur, phosphorus and chlorine can also be present in combined form. Application of this procedure to sulfated ash levels below 0,02 % (m/m) is restricted to oils containing ashless additives
This International Standard describes a procedure for the determination of the mass percentage of sulfated ash from unused lubricating oils containing additives and from additive concentrates used in compounding. These additives usually contain one or more of the following metals: barium, calcium, magnesium, zinc, potassium, sodium and tin. The elements sulfur, phosphorus and chlorine can also be present in combined form. Application of this procedure to sulfated ash levels below 0,02 % (m/m) is restricted to oils containing ashless additives
ISO 3987:2010/Cor 1:2011 is classified under the following ICS (International Classification for Standards) categories: 75.100 - Lubricants, industrial oils and related products. The ICS classification helps identify the subject area and facilitates finding related standards.
ISO 3987:2010/Cor 1:2011 has the following relationships with other standards: It is inter standard links to ISO 3987:2010, ISO 3987:2024. Understanding these relationships helps ensure you are using the most current and applicable version of the standard.
You can purchase ISO 3987:2010/Cor 1:2011 directly from iTeh Standards. The document is available in PDF format and is delivered instantly after payment. Add the standard to your cart and complete the secure checkout process. iTeh Standards is an authorized distributor of ISO standards.
Standards Content (Sample)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Produits pétroliers - Détermination des cendres sulfatées dans les huiles lubrifiantes et dans les additifs - RECTIFICATIF TECHNIQUE 1Petroleum products - Determination of sulfated ash in lubricating oils and additives - TECHNICAL CORRIGENDUM 175.100MazivaLubricants, industrial oils and related productsICS:Ta slovenski standard je istoveten z:ISO 3987:2010/Cor 1:2011SIST ISO 3987:2011/Cor 1:2011en01-november-2011SIST ISO 3987:2011/Cor 1:2011SLOVENSKI
STANDARDSIST ISO 3987:19961DGRPHãþD
ICS
75.100 Ref. No. ISO 3987:2010/Cor.1:2011(E)©
ISO 2011 – All rights reserved Published in Switzerland
INTERNATI
...
ISO 3987:2010/Cor 1:2011は、潤滑油および添加剤における硫酸塩灰の質量百分率を決定するための手順を示した国際標準です。この標準の範囲は、未使用の潤滑油と、化合に使用される添加剤濃縮物に適用されるものであり、一般的にバリウム、カルシウム、マグネシウム、亜鉛、カリウム、ナトリウム、スズといった金属を含む添加剤が含まれています。さらに、硫黄、リン、塩素などの元素も結合した形で存在する可能性があります。 この標準の強みは、潤滑油および添加剤に含まれる硫酸塩灰の定量化を科学的かつ効果的に行う手法を提供している点です。特に、この手法は、灰分を含まない添加剤を使用する油に対して、硫酸塩灰レベルが0.02 % (m/m)未満の場合に適用されることが強調されています。これにより、低灰分添加剤の使用時にも対応できることから、潤滑油の品質管理に非常に役立っています。 ISO 3987:2010/Cor 1:2011は、石油製品の品質評価に不可欠な要素となっており、潤滑油の製造および使用に関連する業界での信頼性を向上させるための基準としての重要性を持っています。標準に従うことで、製造業者は製品の一貫性を確保しつつ、規制を遵守することができ、最終的には消費者に対する安全性と性能の向上に寄与します。
ISO 3987:2010/Cor 1:2011은 윤활유 및 첨가제에서 황산화물 재의 질량 백분율을 결정하는 절차를 설명하며, 이는 윤활유의 품질 분석에 중요한 기준을 제공합니다. 이 표준은 미사용 윤활유와 추가 조합에 사용되는 첨가물 농축액에서 황산화물 재를 측정하는 방법에 대해 다룹니다. 표준의 강점 중 하나는 다양한 금속 성분(바륨, 칼슘, 마그네슘, 아연, 칼륨, 나트륨 및 주석)을 포함한 첨가제를 사용하는 경우에도 널리 적용될 수 있다는 점입니다. 또한, 황, 인 및 염소와 같은 요소가 결합 형태로 존재할 수 있지만, 이 절차는 특히 재가 0.02% 미만인 첨가제가 없는 윤활유에 제한되어 적용됩니다. ISO 3987:2010/Cor 1:2011의 적용은 윤활유의 화학적 성분이 환경 및 엔진 성능에 미치는 영향을 고려할 때 매우 중요합니다. 따라서 이 표준은 석유 제품 산업에서 윤활유의 품질 제어 및 개선에 중요한 역할을 하며, 규정 준수와 품질 보증을 위한 신뢰할 수 있는 기준을 제공합니다. 전반적으로, ISO 3987:2010/Cor 1:2011 표준은 윤활유 및 첨가제 속 황산화물 재 분석의 정확성을 높이고, 다양한 산업 및 연구 분야에서 유용하게 활용될 수 있는 높은 신뢰성을 갖춘 문서입니다.
Das Dokument SIST ISO 3987:2011/Cor 1:2011 beschreibt einen klar definierten Standard zur Bestimmung des massenprozentualen Anteils von sulfatiertem Asche in Schmierölen und Additiven. Der Standard ist von großer Bedeutung für die Branche, da er eine verlässliche Methode zur Analyse von Schmierstoffen mit Zusätzen bietet, die in vielen Anwendungsbereichen eingesetzt werden. Eine der Stärken dieses Standards ist die Spezifizierung der Analysemethoden, die auf unbenutzte Schmieröle und Additivkonzentrate anwendbar sind. Dies stellt sicher, dass die Resultate sowohl konsistent als auch reproduzierbar sind, was für Hersteller und Laboratories von entscheidender Bedeutung ist. Der Standard berücksichtigt auch verschiedene Metalle wie Barium, Calcium, Magnesium, Zink, Kalium, Natrium und Zinn, die typischerweise in Additiven enthalten sind, was die Relevanz des Standard deutlich erhöht. Darüber hinaus wird im Dokument klargestellt, dass die Anwendung dieser Methode auf sulfatierten Aschegehalte unter 0,02 % (m/m) sich auf Öle mit aschefreien Additiven beschränkt. Diese Einschränkung zeigt die Präzision und Zielgenauigkeit der Methode, was für die Qualitätssicherung von Schmierölen von wesentlicher Bedeutung ist. Insgesamt stellt der Standard SIST ISO 3987:2011/Cor 1:2011 einen wichtigen Baustein für die Qualität und die Sicherheitsstandards in der Ölindustrie dar, indem er klare Richtlinien zur Analyse bietet und somit die Konsistenz der Informationen über die chemische Zusammensetzung von Schmierölen gewährleistet.
La norme ISO 3987:2010/Cor 1:2011 présente un cadre essentiel pour la détermination de la cendre sulfatée dans les huiles lubrifiantes et les additifs, ce qui en fait un document clé pour les professionnels de l'industrie pétrolière. Son objectif principal est de fournir une méthode standardisée pour quantifier le pourcentage massique de cendre sulfatée, garantissant ainsi la qualité et la conformité des produits utilisés. L'un des principaux atouts de cette norme réside dans son approche précise et détaillée pour les huiles lubrifiantes contenant des additifs. Ces additifs, souvent composés de métaux tels que le baryum, le calcium, le magnésium, le zinc, le potassium, le sodium et l'étain, sont cruciaux pour améliorer les performances des lubrifiants. En décrivant une méthode de mesure claire, la norme contribue à assurer que les produits répondent aux exigences de performance tout en minimisant l'impact environnemental. De plus, la spécification des seuils d'application, notamment la restriction de la méthode aux niveaux de cendre sulfatée inférieurs à 0,02 % (m/m) pour les huiles contenant des additifs sans cendre, démontre la prise en compte des variations de formulation dans les produits d'huiles lubrifiantes. Cela souligne l'importance de l'adaptabilité de cette norme à différents types de produits, tout en préservant des critères de qualité stricte. La norme ISO 3987:2010/Cor 1:2011 est également pertinente dans le contexte des préoccupations environnementales et de la nécessité pour les entreprises de respecter des réglementations toujours plus strictes. En fournissant une méthode fiable et spécifiée pour la détermination de la cendre sulfatée, elle permet aux fabricants et aux laboratoires d'effectuer des analyses qui soutiennent la durabilité et la réduction des impacts environnementaux des lubrifiants. En somme, cette norme est un outil indispensable pour le secteur des lubrifiants, favorisant une production de haute qualité, soutenant les pratiques responsables, et répondant aux besoins d'exigence technique et réglementaire. Sa richesse technique et sa clarté en font un document fondamental pour toute organisation impliquée dans la formulation et l'analyse des huiles lubrifiantes et de leurs additifs.
The ISO 3987:2010/Cor 1:2011 standard provides a comprehensive procedure for determining the mass percentage of sulfated ash in lubricating oils and their additives. This standard is crucial for professionals in the petroleum industry, as it specifically addresses the quantification of sulfated ash levels in unused lubricating oils that contain various additives. Key elements included in the standard are metals such as barium, calcium, magnesium, zinc, potassium, sodium, and tin, which are integral to many lubricating oil formulations. A significant strength of ISO 3987:2010/Cor 1:2011 is its clear delineation of procedures. By outlining the steps necessary for accurate measurement, it ensures consistency and reliability in results, which is essential for quality control throughout the lubricant manufacturing process. Furthermore, this standard recognizes the presence of elements like sulfur, phosphorus, and chlorine, thereby providing a broader context for the chemical composition of lubricating oils. The relevance of this standard extends beyond mere compliance; it is vital for manufacturers looking to optimize their products' performance. Understanding the sulfated ash content is essential, as excessive levels can lead to detrimental effects on engine components and overall performance. Additionally, the document notably restricts the application of the procedure for oils containing ashless additives to sulfated ash levels below 0.02 % (m/m), which adds an extra layer of consideration for formulators aiming to develop high-performance lubricants. In summary, ISO 3987:2010/Cor 1:2011 stands out for its systematic approach to measuring sulfated ash in lubricating oils and additives, making it an indispensable tool for industry stakeholders seeking to uphold quality and performance standards within their products.
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.
Loading comments...