ISO 11007-1:2021/Amd 1:2023

• Status: Published
• Publication Date: 08-May-2023
• ICS: 75.100 - Lubricants, industrial oils and related products
• Technical Committee: ISO/TC 28 - Petroleum and related products, fuels and lubricants from natural or synthetic sources
• Drafting Committee: ISO/TC 28 - Petroleum and related products, fuels and lubricants from natural or synthetic sources
• Current Stage: 6060 - International Standard published
• Start Date: 09-May-2023
• Due Date: 26-Feb-2024
• Completion Date: 09-May-2023

• Amends: ISO 11007-1:2021 - Petroleum products and lubricants — Determination of rust-prevention characteristics of lubricating greases — Part 1: Dynamic wet conditions
• Effective Date: 27-Aug-2022

Overview

ISO 11007-1:2021/Amd 1:2023 is an important amendment to the international standard governing the rust-prevention characteristics of lubricating greases under dynamic wet conditions. Developed by the International Organization for Standardization (ISO) Technical Committee ISO/TC 28, this amendment specifically addresses the use of test bearings in evaluating corrosion resistance. The standard is critical for manufacturers and users of petroleum products and lubricants, ensuring lubricating greases meet stringent performance criteria to prevent rust and enhance equipment reliability.

Key Topics

• Rust-prevention testing for lubricating greases
  Focuses on assessing the effectiveness of greases in protecting metal surfaces from corrosion during dynamic wet conditions, which simulate real-world operational environments.

• Test bearings specification
  Introduces the use of double row self-aligning bearings conforming to DIN 630 standards, such as SKF 1306K/236725 with steel cages. These bearings are specially inspected and treated with waxy-type corrosion inhibitors, excluding chemical rust inhibitors to avoid test bias.

• Elimination of chemical rust inhibitors
  Highlights the importance of using bearings free from chemical rust inhibitor preservatives after washing to ensure accuracy in rust-prevention testing.

• Normative changes
  Updates normative references, including adding DIN 630 for test bearings and removing ISO 15 related to rolling bearing dimensions.

Applications

The standard and its amendment serve several practical purposes across industries handling lubricating greases and petroleum-based lubricants:

• Quality control
  Enables grease manufacturers to systematically evaluate and certify the rust-prevention performance of their products, ensuring compatibility with bearings and machinery exposed to wet and dynamic conditions.

• Product development
  Assists R&D teams in designing greases with improved corrosion resistance by providing reliable testing methods using standardized bearings.

• Equipment maintenance
  Helps maintenance engineers select appropriate lubricating greases to minimize rust-related failures and extend service life of rolling bearings and rotating machinery.

• Industrial compliance
  Supports meeting regulatory and market requirements concerning lubricant performance and machinery reliability, which is increasingly important in sectors like automotive, manufacturing, and energy.

Related Standards

• DIN 630 – Rolling bearings - Self-aligning ball bearings - Double row with cylindrical or tapered bore
  Specifies the type of bearings required for testing as per the latest amendment.

• ISO 15 – Rolling bearings - Radial bearings - Boundary dimensions, general plan (withdrawn from references in this amendment)
  Previously referenced for bearing dimensions but now replaced by DIN 630 in the context of this standard.

Practical Value

ISO 11007-1:2021/Amd 1:2023 provides an updated framework that ensures accurate and consistent rust-prevention testing of lubricating greases. By standardizing the test bearings and addressing potential biases caused by residual chemical rust inhibitors, this amendment enhances the reliability of corrosion resistance evaluation. This leads to better grease formulation, improved machinery durability, and reduced downtime in environments where wet and dynamic conditions are prevalent.

For stakeholders in the petroleum products and lubricants industry, adherence to this updated standard is essential for maintaining product quality, optimizing lubricant performance, and supporting sustainable maintenance practices.

Keywords: rust-prevention characteristics, lubricating greases, dynamic wet conditions, test bearings, ISO 11007-1 amendment, petroleum lubricants, corrosion resistance testing, DIN 630 bearings, grease quality control.

INTERNATIONAL ISO
STANDARD 11007-1
First edition
2021-07
AMENDMENT 1
2023-05
Petroleum products and lubricants —
Determination of rust-prevention
characteristics of lubricating
greases —
Part 1:
Dynamic wet conditions
AMENDMENT 1: Test bearings
Produits pétroliers et lubrifiants — Détermination des
caractéristiques antirouille des graisses lubrifiantes —
Partie 1: Conditions dynamiques humides
AMENDEMENT 1: Roulements d'essai
Reference number
ISO 11007-1:2021/Amd.1:2023(E)
ISO 11007-1:2021/Amd.1:2023(E)
© ISO 2023
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may
be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting on
the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address below
or ISO’s member body in the country of the requester.
ISO copyright office
CP 401 • Ch. de Blandonnet 8
CH-1214 Vernier, Geneva
Phone: [phone]
Email: [e-mail]
Website: www.iso.org
Published in Switzerland
ii
ISO 11007-1:2021/Amd.1:2023(E)
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards
bodies (ISO member bodies). The work of preparing International Standards is normally carried out
through ISO technical committees. Each member body interested in a subject for which a technical
committee has been established has the right to be represented on that committee. International
organizations, governmental and non-governmental, in liaison with ISO, also take part in the work.
ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of
electrotechnical standardization.
The procedures used to develop this document and those intended for its further maintenance are
described in the ISO/IEC Directives, Part 1. In particular, the different approval criteria needed for the
different types of ISO documents should be noted. This document was drafted in accordance with the
editorial rules of the ISO/IEC Directives, Part 2 (see www.iso.org/directives).
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. ISO shall not be held responsible
...

NORME ISO
INTERNATIONALE 11007-1
Première édition
2021-07
AMENDEMENT 1
2023-05
Produits pétroliers et lubrifiants —
Détermination des caractéristiques
antirouille des graisses lubrifiantes —
Partie 1:
Conditions dynamiques humides
AMENDEMENT 1: Roulements d'essai
Petroleum products and lubricants — Determination of rust-
prevention characteristics of lubricating greases —
Part 1: Dynamic wet conditions
AMENDMENT 1: Test bearings
Numéro de référence
ISO 11007-1:2021/Amd.1:2023(F)
ISO 11007-1:2021/Amd.1:2023(F)
DOCUMENT PROTÉGÉ PAR COPYRIGHT
© ISO 2023
Tous droits réservés. Sauf prescription différente ou nécessité dans le contexte de sa mise en œuvre, aucune partie de cette
publication ne peut être reproduite ni utilisée sous quelque forme que ce soit et par aucun procédé, électronique ou mécanique,
y compris la photocopie, ou la diffusion sur l’internet ou sur un intranet, sans autorisation écrite préalable. Une autorisation peut
être demandée à l’ISO à l’adresse ci-après ou au comité membre de l’ISO dans le pays du demandeur.
ISO copyright office
Case postale 401 • Ch. de Blandonnet 8
CH-1214 Vernier, Genève
Tél.: [phone]
E-mail: [e-mail]
Web: www.iso.org
Publié en Suisse
ii
ISO 11007-1:2021/Amd.1:2023(F)
Avant-propos
L'ISO (Organisation internationale de normalisation) est une fédération mondiale d'organismes
nationaux de normalisation (comités membres de l'ISO). L'élaboration des Normes internationales est
en général confiée aux comités techniques de l'ISO. Chaque comité membre intéressé par une étude
a le droit de faire partie du comité technique créé à cet effet. Les organisations internationales,
gouvernementales et non gouvernementales, en liaison avec l'ISO participent également aux travaux.
L'ISO collabore étroitement avec la Commission électrotechnique internationale (IEC) en ce qui
concerne la normalisation électrotechnique.
Les procédures utilisées pour élaborer le présent document et celles destinées à sa mise à jour sont
décrites dans les Directives ISO/IEC, Partie 1. Il convient, en particulier, de prendre note des différents
critères d'approbation requis pour les différents types de documents ISO. Le présent document a
été rédigé conformément aux règles de rédaction données dans les Directives ISO/IEC, Partie 2 (voir
www.iso.org/directives).
L’ISO attire l’attention sur le fait que la mise en application du présent document peut entraîner
l’utilisation d’un ou de plusieurs brevets. L’ISO ne prend pas position quant à la preuve, à la validité
et à l’applicabilité de tout droit de brevet revendiqué à cet égard. À la date de publication du présent
document, l’ISO n'avait pas reçu notification qu’un ou plusieurs brevets pouvaient être nécessaires à sa
mise en application. Toutefois, il y a lieu d’avertir les responsables de la mise en appli
...