Pipes and fittings made of unplasticized poly(vinyl chloride) (PVC-U) for water supply — Specifications — Part 1: General

Specifies the general aspects of pipes, joints, fittings and ancillaries, made of unplasticized poly(vinyl chloride) (PVC-U), for piping systems intended to be used for buried water mains and for water supplies above ground, both inside and outside buildings. Replaces ISO 4422:1990.

Tubes et raccords en poly(chlorure de vinyle) non plastifié (PVC-U) pour l'adduction d'eau — Spécifications — Partie 1: Généralités

Cevi in fitingi iz nemehčanega polivinilklorida (PVC-U) za oskrbo z vodo - Specifikacije - 1. del: Splošno

General Information

Status
Withdrawn
Publication Date
25-Dec-1996
Withdrawal Date
25-Dec-1996
Current Stage
9599 - Withdrawal of International Standard
Completion Date
01-Dec-2009

Relations

Buy Standard

Standard
ISO 4422-1:1996 - Pipes and fittings made of unplasticized poly(vinyl chloride) (PVC-U) for water supply -- Specifications
English language
3 pages
sale 15% off
Preview
sale 15% off
Preview
Standard
ISO 4422-1:1997
English language
3 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day
Standard
ISO 4422-1:1996 - Tubes et raccords en poly(chlorure de vinyle) non plastifié (PVC-U) pour l'adduction d'eau -- Spécifications
French language
3 pages
sale 15% off
Preview
sale 15% off
Preview
Standard
ISO 4422-1:1996 - Tubes et raccords en poly(chlorure de vinyle) non plastifié (PVC-U) pour l'adduction d'eau -- Spécifications
French language
3 pages
sale 15% off
Preview
sale 15% off
Preview

Standards Content (Sample)

INTERNATIONAL
IS0
STANDARD 4422-l
First edition
1996-12-15
Pipes and fittings made of unplasticized
poly(vinyl chloride) (PVC-U) for water
- Specifications -
SUPPlY
Part 1:
General
Tubes et raccords en poly(chlorure de viny/e) non plastifi6 (PVC-U) pour
I’adduction d’eau - Spkifications -
Partie 7: G&&alit&
Reference number
IS0 4422-1:1996(E)

---------------------- Page: 1 ----------------------
IS0 4422=1:1996(E)
Foreword
IS0 (the International Organization for Standardization) is a worldwide
federation of national standards bodies (IS0 member bodies). The work
of preparing International Standards is normally carried out through IS0
technical committees. Each member body interested in a subject for
which a technical committee has been established has the right to be
represented on that committee. International organizations, governmental
and non-governmental, in liaison with ISO, also take part in the work. IS0
collaborates closely with the International Electrotechnical Commission
(IEC) on all matters of electrotechnical standardization.
Draft International Standards adopted by the technical committees are
circulated to the member bodies for voting. Publication as an International
Standard requires approval by at least 75 % of the member bodies casting
a vote.
International Standard IS0 4422-l was prepared by Technical Committee
lSO/TC 138, Plastics pipes, fittings and valves for the transport of fluids,
Subcommittee SC 2, Plastics pipes and fittings for water supplies.
Together with the other parts, this part of IS0 4422 cancels and replaces
IS0 4422:1990, which has been technically revised.
IS0 4422 consists of the following parts, under the general title Pipes and
fittings made of unplasticized poly(vinyl chloride) (PVC-U) for water
- Specifications:
SUPPlY
- Part I: General
- Part 2: Pipes (with or without integral sockets)
- Part 3: Fittings and joints
- Part 4: Valves and ancillary equipment
- Part 5: Fitness for purpose of the system
IS0 4422 is one of a series of system standards for plastics piping sys-
tems which are being prepared within ISO/TC 138. Each system standard
is based on a specific material for a specific application.
They co nform to a standard multi-part format, each part dealing with a
specific aspect of th e overall system.
0 IS0 1996
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced
or utilized in any form or by any means, electronic or mechanical, including photocopying and
microfilm, without permission in writing from the publisher.
International Organization for Standardization
Case Postale 56 l CH-1211 Geneve 20 l Switzerland
Printed in Switzerland
ii

---------------------- Page: 2 ----------------------
0 IS0 IS0 4422=1:1996(E)
NOTE 1 At the present time, the reference document for the installation code
is ISO/TR 4191, and this document will ultimately form part 6 of this International
Standard.
. . .
III

---------------------- Page: 3 ----------------------
0 IS0
IS0 4422-l : 1996(E)
Introduction
This international Standard, of which this is part 1, specifies the properties
and performance of a piping system and its components made from un-
plasticized poly(vinyl chloride) (PVC-U), to be used for buried water mains
and services and for water supplies above ground, both inside and outside
buildings.
aspects of the ma-
This part of the I nternational Standard covers general
terial and its appl ication.

---------------------- Page: 4 ----------------------
.
INTERNATIONAL STANDARD 0 IS0
IS0 4422-l :1996(E)
Pipes and fittings made of unplasticized
poly(vinyl chloride) (PVC-U) for water supply -
Specifications -
Part 1:
General
part of IS0 4422 are encouraged to investigate the
1 Scope
possibility of applying the most recent editions of the
standards indicated below. Members of IEC and IS0
This part of IS0 4422 specifies the general aspects
maintain registers of currently valid International
of pipes, joints, fittings (post-formed and moulded)
Standards.
and ancillaries, made of unplasticized poly(vinyl chlor-
ide) (PVC-U), for a piping system intended to be used
IS0 3: 1973, Preferred numbers - Series of preferred
for buried water mains and services and for water
numbers.
supplies above ground,
both inside and outside
buildings.
IS0 3114: 1977, Unplasticized polyvinyl chloride (PVC)
pipes for potable water supply - Extractability of lead
The pipes, joints, fittings and ancillaries covered by
this part of IS0 4422 are intended for the conveyance and tin - Test method.
of cold water under pressure at temperatures up to
lSO/TR 4191: 1989, Unplasticized polyvinyl chloride
approximately 20 OC, for general purposes and for the
(PVC-U) pipes for water supply - Recommended
supply of drinking water. This part of IS0 4422 is also
practice for laying.
applicable to water up to and including 45 “C (see
figure 1 in IS0 4422-2:1996).
ISO 4422-2: 1996, Pipes and fittings made of unplasti-
Fittings made by hot-gas fusion and hot-plate fusion cized poly(vinyl chloride) (PVC-U) for water supply -
techniques are not covered by this part of IS0 4422. Specifications - Part 2: Pipes (with or without inte-
gral sockets).
NOTE 2 For installation of components covered by this
International Standard, reference should be made to
IS0 6992: 1986, Unplasticized polyvinyl chloride
ISO/TR 4191.
(PVC-U) pipes for drinking water supply -
Extractability of cadmium and mercury occurring as
impurities.
2 Normative references
lSO/TR 9080:1992, Thermoplastics pipes for the
transport of fluids - Methods of extrapolation of
The following standards contain provisions which,
hydrostatic stress rupture data to determine the
through reference in this text, constitute provisions
long-term hydrostatic strength of thermoplastics pipe
of this part of IS0 4422. At the time of publication, the
materials.
editions indicated were valid. All standards are subject
...

SLOVENSKI STANDARD
SIST ISO 4422-1:1997
01-april-1997
&HYLLQILWLQJLL]QHPHKþDQHJDSROLYLQLONORULGD 39&8 ]DRVNUER]YRGR
6SHFLILNDFLMHGHO6SORãQR
Pipes and fittings made of unplasticized poly(vinyl chloride) (PVC-U) for water supply --
Specifications -- Part 1: General
Tubes et raccords en poly(chlorure de vinyle) non plastifié (PVC-U) pour l'adduction
d'eau -- Spécifications -- Partie 1: Généralités
Ta slovenski standard je istoveten z: ISO 4422-1:1996
ICS:
23.040.20 Cevi iz polimernih materialov Plastics pipes
23.040.45 Fitingi iz polimernih Plastics fittings
materialov
91.140.60 Sistemi za oskrbo z vodo Water supply systems
SIST ISO 4422-1:1997 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST ISO 4422-1:1997

---------------------- Page: 2 ----------------------

SIST ISO 4422-1:1997
INTERNATIONAL
IS0
STANDARD 4422-l
First edition
1996-12-15
Pipes and fittings made of unplasticized
poly(vinyl chloride) (PVC-U) for water
- Specifications -
SUPPlY
Part 1:
General
Tubes et raccords en poly(chlorure de viny/e) non plastifi6 (PVC-U) pour
I’adduction d’eau - Spkifications -
Partie 7: G&&alit&
Reference number
IS0 4422-1:1996(E)

---------------------- Page: 3 ----------------------

SIST ISO 4422-1:1997
IS0 4422=1:1996(E)
Foreword
IS0 (the International Organization for Standardization) is a worldwide
federation of national standards bodies (IS0 member bodies). The work
of preparing International Standards is normally carried out through IS0
technical committees. Each member body interested in a subject for
which a technical committee has been established has the right to be
represented on that committee. International organizations, governmental
and non-governmental, in liaison with ISO, also take part in the work. IS0
collaborates closely with the International Electrotechnical Commission
(IEC) on all matters of electrotechnical standardization.
Draft International Standards adopted by the technical committees are
circulated to the member bodies for voting. Publication as an International
Standard requires approval by at least 75 % of the member bodies casting
a vote.
International Standard IS0 4422-l was prepared by Technical Committee
lSO/TC 138, Plastics pipes, fittings and valves for the transport of fluids,
Subcommittee SC 2, Plastics pipes and fittings for water supplies.
Together with the other parts, this part of IS0 4422 cancels and replaces
IS0 4422:1990, which has been technically revised.
IS0 4422 consists of the following parts, under the general title Pipes and
fittings made of unplasticized poly(vinyl chloride) (PVC-U) for water
- Specifications:
SUPPlY
- Part I: General
- Part 2: Pipes (with or without integral sockets)
- Part 3: Fittings and joints
- Part 4: Valves and ancillary equipment
- Part 5: Fitness for purpose of the system
IS0 4422 is one of a series of system standards for plastics piping sys-
tems which are being prepared within ISO/TC 138. Each system standard
is based on a specific material for a specific application.
They co nform to a standard multi-part format, each part dealing with a
specific aspect of th e overall system.
0 IS0 1996
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced
or utilized in any form or by any means, electronic or mechanical, including photocopying and
microfilm, without permission in writing from the publisher.
International Organization for Standardization
Case Postale 56 l CH-1211 Geneve 20 l Switzerland
Printed in Switzerland
ii

---------------------- Page: 4 ----------------------

SIST ISO 4422-1:1997
0 IS0 IS0 4422=1:1996(E)
NOTE 1 At the present time, the reference document for the installation code
is ISO/TR 4191, and this document will ultimately form part 6 of this International
Standard.
. . .
III

---------------------- Page: 5 ----------------------

SIST ISO 4422-1:1997
0 IS0
IS0 4422-l : 1996(E)
Introduction
This international Standard, of which this is part 1, specifies the properties
and performance of a piping system and its components made from un-
plasticized poly(vinyl chloride) (PVC-U), to be used for buried water mains
and services and for water supplies above ground, both inside and outside
buildings.
aspects of the ma-
This part of the I nternational Standard covers general
terial and its appl ication.

---------------------- Page: 6 ----------------------

SIST ISO 4422-1:1997
.
INTERNATIONAL STANDARD 0 IS0
IS0 4422-l :1996(E)
Pipes and fittings made of unplasticized
poly(vinyl chloride) (PVC-U) for water supply -
Specifications -
Part 1:
General
part of IS0 4422 are encouraged to investigate the
1 Scope
possibility of applying the most recent editions of the
standards indicated below. Members of IEC and IS0
This part of IS0 4422 specifies the general aspects
maintain registers of currently valid International
of pipes, joints, fittings (post-formed and moulded)
Standards.
and ancillaries, made of unplasticized poly(vinyl chlor-
ide) (PVC-U), for a piping system intended to be used
IS0 3: 1973, Preferred numbers - Series of preferred
for buried water mains and services and for water
numbers.
supplies above ground,
both inside and outside
buildings.
IS0 3114: 1977, Unplasticized polyvinyl chloride (PVC)
pipes for potable water supply - Extractability of lead
The pipes, joints, fittings and ancillaries covered by
this part of IS0 4422 are intended for the conveyance and tin - Test method.
of cold water under pressure at temperatures up to
lSO/TR 4191: 1989, Unplasticized polyvinyl chloride
approximately 20 OC, for general purposes and for the
(PVC-U) pipes for water supply - Recommended
supply of drinking water. This part of IS0 4422 is also
practice for laying.
applicable to water up to and including 45 “C (see
figure 1 in IS0 4422-2:1996).
ISO 4422-2: 1996, Pipes and fittings made of unplasti-
Fittings made by hot-gas fusion and hot-plate fusion cized poly(vinyl chloride) (PVC-U) for water supply -
techniques are not covered by this part of IS0 4422. Specifications - Part 2: Pipes (with or without inte-
gral sockets).
NOTE 2 For installation of components covered by this
International Standard, reference should
...

NORME
ISO
INTERNATIONALE
4422-l
Première édition
1996-l 2-l 5
Tubes et raccords en poly(chlorure de
vinyle) non plastifié (PVC-U) pour
l’adduction d’eau - Spécifications -
Partie 1:
Généralités
Pipes and fittings made of unplasticized poly(vinyl chloride) (PVC-U) for
water supply
- Specifications -
Part 1: General
Numéro de référence
KO 4422-l :1996(F)

---------------------- Page: 1 ----------------------
ISO 4422-1: 1996(F)
Avant-propos
L’ISO (Organisation internationale de normalisation) est une fédération
mondiale d’organismes nationaux de normalisation (comités membres de
I’ISO). L’élaboration des Normes internationales est en général confiée aux
comités techniques de I’ISO. Chaque comité membre intéressé par une
étude a le droit de faire partie du comité technique créé à cet effet. Les
organisations internationales, gouvernementales et non gouvernemen-
tales, en liaison avec I’ISO participent également aux travaux. L’ISO colla-
bore étroitement avec la Commission électrotechnique internationale (CEI)
en ce qui concerne la normalisation électrotechnique.
Les projets de Normes internationales adoptés par les comités techniques
sont soumis aux comités membres pour vote. Leur publication comme
Normes internationales requiert l’approbation de 75 % au moins des co-
mités membres votants.
La Norme internationale ISO 4422-l a été élaborée par le comité techni-
que I SOJTC 138, Tubes, raccords et robinetterie en matières plastiques
pour le transport des fluides, sous-comité SC 2, Tubes et raccords en
matières plastiques pour adduction et distribution d’eau.
L’ISO 4422-l ainsi que les autres parties de I’ISO 4422 annulent et rem-
placent I’ISO 4422:1990, dont elles constituent une révision technique.
L’ISO 4422 comprend les parties suivantes, présentées sous le titre gé-
néral Tubes et raccords en polyfchlorure de vinyle) non plastifié (PVC-U)
pour l’adduction d’eau - Spécifications:
- Partie 1: Généralités
- Partie 2: Tubes (avec ou sans emboîtures incorporées)
- Partie 3: Raccords et assemblages
- Partie 4: Robinets et accessoires
- Partie 5: Aptitude à l’emploi du système
L’ISO 4422 fait partie d’une série de normes de système relatives aux
systèmes de canalisations en plastiques, en cours d’élaboration au sein
de l’lSO/K 138. Chaque norme de système est basée sur une matière
particulière destinée à une application spécifique.
0 ISO 1996
Droits de reproduction réservés. Sauf prescription différente, aucune partie de cette publi-
cation ne peut être reproduite ni utilisée sous quelque forme que ce soit et par aucun pro-
cédé, électronique ou mécanique, y compris la photocopie et les microfilms, sans l’accord
écrit de l’éditeur.
Organisation internationale de normalisation
Case Postale 56 l CH-l 211 Genève 20 l Suisse
tmprimé en Suisse
ii

---------------------- Page: 2 ----------------------
0 ISO ISO 4422-l : 1996(F)
Ces normes sont conformes à un modèle normalisé sous forme de par-
ties, chacune d’elles traitant d’un aspect spécifique de l’ensemble du
système.
NOTE 1 Présentement, le document de référence relatif au code de pose est
I’lSO/TR 4191, qui doit constituer par la suite la partie 6 de I’ISO 4422.
. . .
III

---------------------- Page: 3 ----------------------
0 ISO
ISO 4422-l : 1996(F)
Introduction
L’ISO 4422, dont le présent document constitue la partie 1, prescrit les
propriétés et l’aptitude à l’emploi d’un système de canalisations et de ses
composants en poly(chlorure de vinyle) non plastifié (PVC-U), à utiliser
pour les conduites d’eau principales et branchements enterrés, et pour la
distribution d’eau non enterrée, aussi bien à l’intérieur qu’a l’extérieur des
bâtiments.
La présente partie de I’ISO 4422 traite des aspects généraux relatifs à la
matière et à ses applications.

---------------------- Page: 4 ----------------------
NORME INTERNATIONALE 0 ISO
ISO 4422=1:1996(F)
Tubes et raccords en poly(chlorure de vinyle) non
plastifié (PVC-U) pour l’adduction d’eau -
Spécifications -
Partie 1:
Généralités
tuent des dispositions valables pour la présente partie
de I’ISO 4422. Au moment de la publication, les édi-
tions indiquées étaient en vigueur. Toute norme est
1 Domaine d’application
sujette à révision et les parties prenantes des accords
fondés sur la présente partie de I’ISO 4422 sont invi-
La présente partie de I’ISO 4422 spécifie les aspects
tées à rechercher la possibilité d’appliquer les éditions
généraux relatifs aux tubes, assemblages, raccords
les plus récentes des normes indiquées ci-après. Les
(formés et moulés) et accessoires en poly(chlorure de
membres de la CEI et de I’ISO possèdent le registre
vinyle) non plastifié (PVC-U) d’un système de canali-
des Normes internationales en vigueur à un moment
sation destiné à être utilisé pour les conduites d’eau
donné.
principales et branchements enterrés, et pour la dis-
tribution d’eau non enterrée, aussi bien à l’intérieur
ISO 3: 1973, Nombres normaux - Séries de nombres
qu’à l’extérieur des bâtiments.
normaux.
Les tubes, assemblages, raccords et accessoires
ISO 3114: 1977, Tubes en polychlorure de vinyle (PVC)
auxquels s’applique la présente partie de I’ISO 4422
non plastifié pour l’alimentation en eau potable -
sont destinés au transport de l’eau froide sous pres-
Extractibilité du plomb et de l’étain - Méthode
sion, à des températures allant jusqu’à environ
d’essai.
20 OC, pour des usages généraux et la distribution de
l’eau potable. La présente partie de I’ISO 4422 s’ap-
lSO/TR 4191: 1989, Canalisations en polychlorure de
plique aussi à de l’eau jusqu’à et y compris 45 OC (voir
vinyle non plastifié (PVC-U) pour l’adduction d’eau -
figure 1 de I’ISO 4422-2:1996).
Pratiaue recommandée pour la pose.
Elle ne s’applique pas aux raccords fabriqués par
ISO 4422-2: 1996, Tubes et raccords en polyfchlorure
soudage à l’aide d’un gaz chaud ou d’un miroir.
de vinyle) non plastifié (PVC-U) pour l’adduction d’eau
NOTE 2 Pour l’installation des éléments auxquels s’ap-
- Spécifications
- Partie 3: Tubes (avec ou sans
plique I’ISO 4422, il convient de faire référence à
emboîtures incorporées).
I’ISOTTR 4191.
ISO 6992:1986, Tubes en polychlorure de vinyle non
plastifié (PVC-lJ) pour l’alimentation en eau potable
2 Références normatives
- Extractibilité du cadmium et du mercure au titre
Les normes suivantes contiennent des dispositions des impuretés.
qui, par suite de la référence qui en est faite, consti-

---------------------- Page: 5 ----------------------
0 ISO
ISb 4422-l : 1996(F)
NOTE 5 Si les unités de
...

NORME
ISO
INTERNATIONALE
4422-l
Première édition
1996-l 2-l 5
Tubes et raccords en poly(chlorure de
vinyle) non plastifié (PVC-U) pour
l’adduction d’eau - Spécifications -
Partie 1:
Généralités
Pipes and fittings made of unplasticized poly(vinyl chloride) (PVC-U) for
water supply
- Specifications -
Part 1: General
Numéro de référence
KO 4422-l :1996(F)

---------------------- Page: 1 ----------------------
ISO 4422-1: 1996(F)
Avant-propos
L’ISO (Organisation internationale de normalisation) est une fédération
mondiale d’organismes nationaux de normalisation (comités membres de
I’ISO). L’élaboration des Normes internationales est en général confiée aux
comités techniques de I’ISO. Chaque comité membre intéressé par une
étude a le droit de faire partie du comité technique créé à cet effet. Les
organisations internationales, gouvernementales et non gouvernemen-
tales, en liaison avec I’ISO participent également aux travaux. L’ISO colla-
bore étroitement avec la Commission électrotechnique internationale (CEI)
en ce qui concerne la normalisation électrotechnique.
Les projets de Normes internationales adoptés par les comités techniques
sont soumis aux comités membres pour vote. Leur publication comme
Normes internationales requiert l’approbation de 75 % au moins des co-
mités membres votants.
La Norme internationale ISO 4422-l a été élaborée par le comité techni-
que I SOJTC 138, Tubes, raccords et robinetterie en matières plastiques
pour le transport des fluides, sous-comité SC 2, Tubes et raccords en
matières plastiques pour adduction et distribution d’eau.
L’ISO 4422-l ainsi que les autres parties de I’ISO 4422 annulent et rem-
placent I’ISO 4422:1990, dont elles constituent une révision technique.
L’ISO 4422 comprend les parties suivantes, présentées sous le titre gé-
néral Tubes et raccords en polyfchlorure de vinyle) non plastifié (PVC-U)
pour l’adduction d’eau - Spécifications:
- Partie 1: Généralités
- Partie 2: Tubes (avec ou sans emboîtures incorporées)
- Partie 3: Raccords et assemblages
- Partie 4: Robinets et accessoires
- Partie 5: Aptitude à l’emploi du système
L’ISO 4422 fait partie d’une série de normes de système relatives aux
systèmes de canalisations en plastiques, en cours d’élaboration au sein
de l’lSO/K 138. Chaque norme de système est basée sur une matière
particulière destinée à une application spécifique.
0 ISO 1996
Droits de reproduction réservés. Sauf prescription différente, aucune partie de cette publi-
cation ne peut être reproduite ni utilisée sous quelque forme que ce soit et par aucun pro-
cédé, électronique ou mécanique, y compris la photocopie et les microfilms, sans l’accord
écrit de l’éditeur.
Organisation internationale de normalisation
Case Postale 56 l CH-l 211 Genève 20 l Suisse
tmprimé en Suisse
ii

---------------------- Page: 2 ----------------------
0 ISO ISO 4422-l : 1996(F)
Ces normes sont conformes à un modèle normalisé sous forme de par-
ties, chacune d’elles traitant d’un aspect spécifique de l’ensemble du
système.
NOTE 1 Présentement, le document de référence relatif au code de pose est
I’lSO/TR 4191, qui doit constituer par la suite la partie 6 de I’ISO 4422.
. . .
III

---------------------- Page: 3 ----------------------
0 ISO
ISO 4422-l : 1996(F)
Introduction
L’ISO 4422, dont le présent document constitue la partie 1, prescrit les
propriétés et l’aptitude à l’emploi d’un système de canalisations et de ses
composants en poly(chlorure de vinyle) non plastifié (PVC-U), à utiliser
pour les conduites d’eau principales et branchements enterrés, et pour la
distribution d’eau non enterrée, aussi bien à l’intérieur qu’a l’extérieur des
bâtiments.
La présente partie de I’ISO 4422 traite des aspects généraux relatifs à la
matière et à ses applications.

---------------------- Page: 4 ----------------------
NORME INTERNATIONALE 0 ISO
ISO 4422=1:1996(F)
Tubes et raccords en poly(chlorure de vinyle) non
plastifié (PVC-U) pour l’adduction d’eau -
Spécifications -
Partie 1:
Généralités
tuent des dispositions valables pour la présente partie
de I’ISO 4422. Au moment de la publication, les édi-
tions indiquées étaient en vigueur. Toute norme est
1 Domaine d’application
sujette à révision et les parties prenantes des accords
fondés sur la présente partie de I’ISO 4422 sont invi-
La présente partie de I’ISO 4422 spécifie les aspects
tées à rechercher la possibilité d’appliquer les éditions
généraux relatifs aux tubes, assemblages, raccords
les plus récentes des normes indiquées ci-après. Les
(formés et moulés) et accessoires en poly(chlorure de
membres de la CEI et de I’ISO possèdent le registre
vinyle) non plastifié (PVC-U) d’un système de canali-
des Normes internationales en vigueur à un moment
sation destiné à être utilisé pour les conduites d’eau
donné.
principales et branchements enterrés, et pour la dis-
tribution d’eau non enterrée, aussi bien à l’intérieur
ISO 3: 1973, Nombres normaux - Séries de nombres
qu’à l’extérieur des bâtiments.
normaux.
Les tubes, assemblages, raccords et accessoires
ISO 3114: 1977, Tubes en polychlorure de vinyle (PVC)
auxquels s’applique la présente partie de I’ISO 4422
non plastifié pour l’alimentation en eau potable -
sont destinés au transport de l’eau froide sous pres-
Extractibilité du plomb et de l’étain - Méthode
sion, à des températures allant jusqu’à environ
d’essai.
20 OC, pour des usages généraux et la distribution de
l’eau potable. La présente partie de I’ISO 4422 s’ap-
lSO/TR 4191: 1989, Canalisations en polychlorure de
plique aussi à de l’eau jusqu’à et y compris 45 OC (voir
vinyle non plastifié (PVC-U) pour l’adduction d’eau -
figure 1 de I’ISO 4422-2:1996).
Pratiaue recommandée pour la pose.
Elle ne s’applique pas aux raccords fabriqués par
ISO 4422-2: 1996, Tubes et raccords en polyfchlorure
soudage à l’aide d’un gaz chaud ou d’un miroir.
de vinyle) non plastifié (PVC-U) pour l’adduction d’eau
NOTE 2 Pour l’installation des éléments auxquels s’ap-
- Spécifications
- Partie 3: Tubes (avec ou sans
plique I’ISO 4422, il convient de faire référence à
emboîtures incorporées).
I’ISOTTR 4191.
ISO 6992:1986, Tubes en polychlorure de vinyle non
plastifié (PVC-lJ) pour l’alimentation en eau potable
2 Références normatives
- Extractibilité du cadmium et du mercure au titre
Les normes suivantes contiennent des dispositions des impuretés.
qui, par suite de la référence qui en est faite, consti-

---------------------- Page: 5 ----------------------
0 ISO
ISb 4422-l : 1996(F)
NOTE 5 Si les unités de
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.