iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
SIST

SIST EN ISO 11399:2002

(Main)

Ergonomics of the thermal environment - Principles and application of relevant International Standards (ISO 11399:1995)

Ergonomics of the thermal environment - Principles and application of relevant International Standards (ISO 11399:1995)

The purpose of this International Standard is to specify information which will  allow the correct, effective and practical use of International Standards concerned with the ergnomics of the thermal environment. This includes: a) a description of each relevant International Standard and the complementary way i in which these standards can be used in the ergonomic assessment of thermal environments; b) a description of the underlying principles used in each relevant International Standard; c) a description of the underlying principles concerning the ergonomics of the thermal environment.

Ergonomie des Umgebungsklimas - Grundsätze und Anwendung relevanter Internationaler Normen (ISO 11399:1995)

Der Zweck dieser Internationalen Norm ist das Festlegen von Angaben, die die richtige, wirksame und praktische Anwendung von Internationalen Normen gestatten, die sich mit ergonomischen Aspekten des Umgebungsklimas befassen. Dies umfaßt: a) eine Beschreibung jeder maßgeblichen Internationalen Norm und wie diese Normen in ergänzender Weise zur ergonomischen Beurteilung des Umgebungsklimas angewendet werden können: b) eine Beschreibung der zugrundeliegenden Prinzipien, die in jeder maßgeblichen Internationalen Norm angewendet wurden; usw.

Ergonomie des ambiances thermiques - Principes et application des Normes internationales pertinentes (ISO 11399:1995)

La présente Norme internationale a pour but de fournir des informations qui permettront d'utiliser correctement, de manière efficace et pratique les Normes internationales relatives à l'ergonomie de l'environnement thermique.  Elle comprend  a) une description de chaque Norme internationale, ainsi que l'utilisation complémentaire pouvant être faite des normes lors de l'évaluation ergonomique des ambiances thermiques;  b) une description des principes sous-jacents dont il est tenu compte dans chaque Norme internationale;  c) une description des principes sous-jacents relatifs à l'ergonomie de l'environnement thermique.  La présente Norme internationale traite de l'application des normes énumérées dans l'article 2. Ces normes traitent des ambiances thermiques dans l'ensemble du domaine couvert par les recherches ergonomiques.  Les informations données dans la présente Norme internationale ne suffisent pas à l'évaluation des ambiances thermiques. Pour ce faire, il convient d'utiliser la Norme internationale appropriée (voir article 2).

Ergonomija toplotnega okolja - Načela in uporaba mednarodnih standardov na tem področju (ISO 11399:1995)

General Information

Status
Published
Publication Date
31-Aug-2002
ICS
13.180 - Ergonomics
Technical Committee
VSN - Safety of machinery
Current Stage
6060 - National Implementation/Publication (Adopted Project)
Start Date
01-Sep-2002
Due Date
01-Sep-2002
Completion Date
01-Sep-2002
Ref Project
EN ISO 11399:2000 - Ergonomics of the thermal environment - Principles and application of relevant International Standards (ISO 11399:1995)

Relations

Replaces
SIST ISO 11399:2001 - Ergonomics of the thermal environment -- Principles and application of relevant International Standards
Effective Date
01-Mar-2005

Buy Standard

EN ISO 11399:2002EN ISO 11399:2002
PreviousNext
Standard
EN ISO 11399:2002
English language
21 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN ISO 11399:2002
01-september-2002
1DGRPHãþD
SIST ISO 11399:2001
(UJRQRPLMDWRSORWQHJDRNROMD1DþHODLQXSRUDEDPHGQDURGQLKVWDQGDUGRYQDWHP
SRGURþMX ,62
Ergonomics of the thermal environment - Principles and application of relevant
International Standards (ISO 11399:1995)
Ergonomie des Umgebungsklimas - Grundsätze und Anwendung relevanter
Internationaler Normen (ISO 11399:1995)
Ergonomie des ambiances thermiques - Principes et application des Normes
internationales pertinentes (ISO 11399:1995)
Ta slovenski standard je istoveten z: EN ISO 11399:2000
ICS:
13.180 Ergonomija Ergonomics
SIST EN ISO 11399:2002 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN ISO 11399:2002

---------------------- Page: 2 ----------------------

SIST EN ISO 11399:2002

---------------------- Page: 3 ----------------------

SIST EN ISO 11399:2002

---------------------- Page: 4 ----------------------

SIST EN ISO 11399:2002

---------------------- Page: 5 ----------------------

SIST EN ISO 11399:2002

---------------------- Page: 6 ----------------------

SIST EN ISO 11399:2002

---------------------- Page: 7 ----------------------

SIST EN ISO 11399:2002

---------------------- Page: 8 ----------------------

SIST EN ISO 11399:2002

---------------------- Page: 9 ----------------------

SIST EN
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

SIST
SIST-TP CEN ISO/TR 9241-311:2023(Main)
Ergonomics of human-system interaction - Part 311: Application of ISO 9241-307: LCD screens for workstations (ISO/TR 9241-311:2022)
CEN ISO/TR 9241-311:2023

This document provides information relating to the specification of liquid crystal display (LCD) screens at visual display workstations in indoor location, in accordance with ISO 9241-307:2008 clause 5.2. The decision guidance is limited to LCD screens, since these are typically used at workstations.
The information is intended to support managerial decision makers (e. g. procurement operators, companies’ safety committees, occupational safety and health professionals), who are responsible for the acquisition of visual displays.

  • Technical report
    22 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST-TP CEN ISO/TR 9241-514:2023(Main)
Ergonomics of human-system interaction - Part 514: Guidance for the application of anthropometric data in the ISO 9241-500 series (ISO/TR 9241-514:2020)
CEN ISO/TR 9241-514:2022

This document is intended to provide guidance in the use of anthropometric data within the ISO 9241-500 series.

  • Technical report
    16 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN ISO 15537:2022(Main)
Principles for selecting and using test persons for testing anthropometric aspects of industrial products and designs (ISO 15537:2022)
EN ISO 15537:2022

This document establishes methods for determining the composition of groups of persons whose
anthropometric characteristics are to be representative of the intended user population of any specific
object under test.
This document is applicable to the testing of anthropometric aspects of industrial products and designs
having direct contact with the human body or dependent on human body measurements, such as
machinery, work equipment, personal protective equipment (PPE), consumer goods, working spaces,
architectural details or transportation equipment.
This document is also applicable to the testing of such safety aspects of products that are dependent on
human body measurements. It does not deal with other aspects of the task or other requirements, such
as perception of information (except geometrical arrangement of the viewing targets) and the use of
controls (except their geometrical placement).
Although this document deals with selecting test persons from an anthropometric perspective, similar
general principles can be applied for other test variables, e.g. biomechanical aspects.

  • Standard
    17 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    16 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST-TP CEN ISO/TR 9241-312:2022(Main)
Ergonomics of human-system interaction - Part 312: Readability of electrophoretic displays (ISO/TR 9241-312:2020)
CEN ISO/TR 9241-312:2022

This document provides an overview of recent research on readability of electrophoretic displays. It also provides information for evaluating readability of electrophoretic displays and defining the context of their use.

  • Technical report
    45 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST-TS CEN ISO/TS 9241-126:2022(Main)
Ergonomics of human-system interaction - Part 126: Guidance on the presentation of auditory information (ISO/TS 9241-126:2019)
CEN ISO/TS 9241-126:2022

This document provides guidance for the auditory presentation of information controlled by software, irrespective of the device. It includes specific properties such as the syntactic or semantic aspects of information, e.g. coding techniques, and gives provisions for the organization of information taking account of human perception and memory capabilities.
This document does not address the hardware issues of the transmission and the production of auditory information.
NOTE 1   Volume is dependent on hardware and thus cannot always be absolutely controlled by software. Environmental conditions can also affect the ability for sounds to be perceived, which can be beyond the ability of the software to take into account.
This document does not apply to auditory alarms, warnings or other safety-related uses of auditory information.
NOTE 2   Safety-related uses of auditory presentation of information are covered in various domain specific standards, such as ISO 7731:2003 which deals with auditory danger signals for public and work areas, and IEC 60601-1-8:2006 which provides very specific requirements for auditory alarms for medical devices.
While this document applies to the presentation of all non-safety-related information, it does not include application domain specific guidance (e.g., audio instructions for consumer products).
This document can be utilized throughout the design process (e.g. as specification and guidance for designers during design or as a basis for heuristic evaluation). Its provisions for the presentation of information depend on the auditory design approach, the task, the user, the environment and the single or multiple technologies that can be used for presenting the information. Consequently, this document cannot be applied without knowledge of the context of use. It is not intended to be used as a prescriptive set of rules to be applied in its entirety but rather assumes that the designer has proper information available concerning task and user requirements and understands the use of available technology.
This document does not address visual or tactile/haptic presentation of information or modality shifting for the presentation of auditory information in other modalities.
NOTE 3   ISO 9241-112 provides high-level ergonomic guidance that applies to all modalities.

  • Technical specification
    30 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST-TP CEN ISO/TR 9241-810:2022(Main)
Ergonomics of human-system interaction - Part 810: Robotic, intelligent and autonomous systems (ISO/TR 9241-810:2020)
CEN ISO/TR 9241-810:2022

This document addresses:
— physically embodied RIA systems, such as robots and autonomous vehicles with which users will physically interact;
— systems embedded within the physical environment with which users do not consciously interact, but which collect data and/or modify the environment within which people live or work such as smart building and, mood-detection;
— intelligent software tools and agents with which users actively interact through some form of user interface;
— intelligent software agents which act without active user input to modify or tailor the systems to the user's behaviour, task or some other purpose, including providing context specific content/information, tailoring adverts to a user based on information about them, user interfaces that adapt to the cognitive or physiological state, "ambient intelligence";
— the effect on users resulting from the combined interaction of several RIA systems such as conflicting behaviours between the RIA systems under the same circumstances;
— the complex system-of-systems and sociotechnical impacts of the use of RIA systems, particularly on society and government.
This document is not an exploration of the philosophical, ethical or political issues surrounding robotics, artificial intelligence, machine learning, and intelligent machines or environments. For matters of ethics and political issues, see standards such as BS 8611 and IEC P7000. However, this document does identify where and why ethical issues need to be taken into account for a wide range of systems and contexts, and as such it provides information relevant to the broader debate regarding RIA systems.
This document has a broader focus than much of the early work on autonomy that relates to the automation of control tasks and mechanization of repetitive physical or cognitive tasks, and centres on levels of automation.
Although this document addresses a wide range of technology applications, and sector and stakeholder views on the issues, the treatment of each can be incomplete due to the diverse and increasingly varied applications of RIA systems.

  • Technical report
    60 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN ISO 9241-940:2022(Main)
Ergonomics of human-system interaction - Part 940: Evaluation of tactile and haptic interactions (ISO 9241-940:2017)
EN ISO 9241-940:2022

This document:
- describes the types of methods that can be used for the evaluation of haptic devices and of systems that include haptic devices,
- specifies a procedure for the evaluation of haptic interactions by a usability walkthrough or usability test (see Annex J), and
- provides guidance on the types of methods that are appropriate for the evaluation of specific attributes of haptic systems, cross-referenced to the guidance in the relevant clauses of other International Standards (see Annexes A, B, C, D, E, F and G).
It applies to the following types of interaction :
- augmented reality — information overlaid on a real scene, e.g. vibrating belt indicating distance;
- gesture control of a device or a virtual scenario;
- unidirectional interaction such as a vibrating phone or a vibrating belt;
- virtual environment — virtual space with which a user can interact with the aid of a haptic device.
ISO 9241-940 applies to the following types of devices:
- gesture sensor, e.g. video that discerns 3D hand movements, touch screens that sense 2D touches;
- kinaesthetic haptic device e.g. desktop haptic interface;
- tactile display e.g. vibrating phone.
ISO 9241-940 is not applicable to standard input devices such as keyboards, mice or track balls.
NOTE   The ISO 9241-400 subseries covers standard input devices, and ISO 9241-411 applies to the evaluation of input devices such as keyboards and mice.
ISO 9241-940 can be used to identify the types of methods and measures for
- establishing benchmarks,
- establishing requirements for haptic interaction,
- identifying problems with haptic interaction (formative evaluation), and
- use of the criteria to establish whether a haptic system meets requirements (summative evaluation).

  • Standard
    110 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    107 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST-TP CEN ISO/TR 11064-10:2022(Main)
Ergonomic design of control centres - Part 10: Introduction to the control room design series of standards (ISO/TR 11064-10:2020)
CEN ISO/TR 11064-10:2022

This document describes the different parts of the ISO 11064 series. The overall content of each of the parts is presented, the most likely users of that part and the relevance of each part to different stages in the control room design process.

  • Technical report
    16 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN ISO 9241-971:2022(Main)
Ergonomics of human-system interaction - Part 971: Accessibility of tactile/haptic interactive systems (ISO 9241-971:2020)
EN ISO 9241-971:2022

This document provides both general and specific ergonomic requirements and recommendations for accessible tactile/haptic interactive systems, including accessible tactile/haptic interactions.
This document provides guidance for increasing the accessibility of interactive systems making use of tactile/haptic input/output modalities such as gestures, vibration, and force feedback. The guidance provided also supports alternative input modalities and the use of different output representations.
This document provides guidance for tactile/haptic interactions that is applicable to a variety of interactive systems, including assistive technologies (AT).

  • Standard
    30 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    27 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN ISO 9241-394:2022(Main)
Ergonomics of human-system interaction - Part 394: Ergonomic requirements for reducing undesirable biomedical effects of visually induced motion sickness during watching electronic images (ISO 9241-394:2020)
EN ISO 9241-394:2022

This document establishes the requirements and recommendations for image contents and electronic display systems to reduce visually induced motion sickness (VIMS), while viewing images on electronic displays.
This document is applicable to electronic display systems, including flat panel displays, projectors with a screen, and virtual reality (VR) type of head mounted displays (HMDs), but not including HMDs that present electronic images on/with real-world scenes.
NOTE 1   This document assumes the images are viewed under appropriate defined conditions. See Annex B for the appropriate viewing conditions.
NOTE 2   This document is useful for the design, development, and supply of image contents, as well as electronic displays for reducing VIMS.
NOTE 3   ISO 9241 392 provides guidelines for stereoscopic 3D displays, of which the methods are also used in HMDs.
NOTE 4   The International Telecommunication Union (ITU) generally sets the standard

  • Standard
    33 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    30 pages
    English language
    sale 10% off
    e-Library read for
    1 day