SIST EN ISO 13845:2015
(Main)Plastics piping systems - Elastomeric-sealing-ring-type socket joints for use with thermoplastic pressure pipes - Test method for leaktightness under internal pressure and with angular deflection (ISO 13845:2015)
Plastics piping systems - Elastomeric-sealing-ring-type socket joints for use with thermoplastic pressure pipes - Test method for leaktightness under internal pressure and with angular deflection (ISO 13845:2015)
This International Standard specifies a method for testing the leak tightness under internal pressure
with angular deflection of assembled joints between elastomeric-sealing-ring-type sockets made of
plastic or metal and plastic pressure pipes.
Kunststoff-Rohrleitungssysteme - Steckmuffenverbindungen mit elastomeren Dichtringen für Rohre aus Thermoplasten - Prüfverfahren für die Dichtheit unter Innendruck und Abwinkelung (ISO 13845:2015)
Diese Norm legt ein Verfahren zur Prüfung der Dichtheit bei Innendruck mit Abwinkelung von montierten Verbindungen zwischen Steckmuffen mit elastomeren Dichtringen aus thermoplastischem Kunststoff oder Metall und thermoplastischen Druckrohren fest.
Systèmes de canalisations en plastiques - Assemblages par emboîture à bague d'étanchéité en élastomère pour les tubes sous pression plastiques - Méthode d'essai d'étanchéité sous pression interne et avec déviation angulaire (ISO 13845:2015)
L'ISO 13845:2015 spécifie une méthode d'essai pour l'étanchéité sous pression interne avec déviation angulaire d'assemblages entre emboîtures avec bague d'étanchéité en élastomère réalisées en plastique ou en métal et tubes sous pression plastiques.
Cevni sistemi iz polimernih materialov - Spoji z elastomernimi tesnilnimi obroči za plastomerne cevi - Metoda za preskus tesnjenja spojev, ki so obremenjeni z notranjim tlakom in izpostavljeni upogibu (ISO 13845:2015)
Ta mednarodni standard določa metodo za preskušanje tesnjenja spojev, ki so obremenjeni z notranjim tlakom in izpostavljeni upogibu, za sestavljene spoje med elastomernimi tesnilnimi obroči iz polimernih ali kovinskih in polimernih cevi.
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
SIST EN ISO 13845:2015
01-april-2015
1DGRPHãþD
SIST EN ISO 13845:2001
&HYQLVLVWHPLL]SROLPHUQLKPDWHULDORY6SRML]HODVWRPHUQLPLWHVQLOQLPLREURþL]D
SODVWRPHUQHFHYL0HWRGD]DSUHVNXVWHVQMHQMDVSRMHYNLVRREUHPHQMHQL]
QRWUDQMLPWODNRPLQL]SRVWDYOMHQLXSRJLEX ,62
Plastics piping systems - Elastomeric-sealing-ring-type socket joints for use with
thermoplastic pressure pipes - Test method for leaktightness under internal pressure and
with angular deflection (ISO 13845:2015)
Kunststoff-Rohrleitungssysteme - Steckmuffenverbindungen mit elastomeren Dichtringen
für Rohre aus Thermoplasten - Prüfverfahren für die Dichtheit unter Innendruck und
Abwinkelung (ISO 13845:2015)
Systèmes de canalisations en plastiques - Assemblages par emboîture à bague
d'étanchéité en élastomère pour les tubes sous pression plastiques - Méthode d'essai
d'étanchéité sous pression interne et avec déviation angulaire (ISO 13845:2015)
Ta slovenski standard je istoveten z: EN ISO 13845:2015
ICS:
23.040.60 Prirobnice, oglavki in spojni Flanges, couplings and joints
elementi
SIST EN ISO 13845:2015 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
SIST EN ISO 13845:2015
---------------------- Page: 2 ----------------------
SIST EN ISO 13845:2015
EUROPEAN STANDARD
EN ISO 13845
NORME EUROPÉENNE
EUROPÄISCHE NORM
February 2015
ICS 91.140.60; 23.040.20; 23.040.01 Supersedes EN ISO 13845:2000
English Version
Plastics piping systems - Elastomeric-sealing-ring-type socket
joints for use with thermoplastic pressure pipes - Test method for
leaktightness under internal pressure and with angular deflection
(ISO 13845:2015)
Systèmes de canalisations en plastiques - Assemblages Kunststoff-Rohrleitungssysteme -
par emboîture à bague d'étanchéité en élastomère pour les Steckmuffenverbindungen mit elastomeren Dichtringen für
tubes sous pression plastiques - Méthode d'essai Rohre aus Thermoplasten - Prüfverfahren für die Dichtheit
d'étanchéité sous pression interne et avec déviation unter Innendruck und Abwinkelung (ISO 13845:2015)
angulaire (ISO 13845:2015)
This European Standard was approved by CEN on 24 January 2015.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national
standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same
status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,
Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United
Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2015 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 13845:2015 E
worldwide for CEN national Members.
---------------------- Page: 3 ----------------------
SIST EN ISO 13845:2015
EN ISO 13845:2015 (E)
Contents Page
Foreword .3
2
---------------------- Page: 4 ----------------------
SIST EN ISO 13845:2015
EN ISO 13845:2015 (E)
Foreword
This document (EN ISO 13845:2015) has been prepared by Technical Committee ISO/TC 138 “Plastics pipes,
fittings and valves for the transport of fluids” in collaboration with Technical Committee CEN/TC 155 “Plastics
piping systems and ducting systems” the secretariat of which is held by NEN.
This European Standard shall be given the status of a national standard, either by publication of an identical
text or by endorsement, at the latest by August 2015, and conflicting national standards shall be withdrawn at
the latest by August 2015.
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent
rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent rights.
This document supersedes EN ISO 13845:2000.
According to the CEN-CENELEC Internal Regulations, the national standards organizations of the following
countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech
Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece,
Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal,
Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom.
Endorsement notice
The text of ISO 13845:2015 has been approved by CEN as EN ISO 13845:2015 without any modification.
3
---------------------- Page: 5 ----------------------
SIST EN ISO 13845:2015
---------------------- Page: 6 ----------------------
SIST EN ISO 13845:2015
INTERNATIONAL ISO
STANDARD 13845
Second edition
2015-02-15
Plastics piping systems —
Elastomeric-sealing-ring-type socket
joints for use with thermoplastic
pressure pipes — Test method for
leaktightness under internal pressure
and with angular deflection
Systèmes de canalisations en plastiques — Assemblages par
emboîture à bague d’étanchéité en élastomère pour les tubes sous
pression plastiques — Méthode d’essai d’étanchéité sous pression
interne et avec déviation angulaire
Reference number
ISO 13845:2015(E)
©
ISO 2015
---------------------- Page: 7 ----------------------
SIST EN ISO 13845:2015
ISO 13845:2015(E)
COPYRIGHT PROTECTED DOCUMENT
© ISO 2015
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized otherwise in any form
or by any means, electronic or mechanical, including photocopying, or posting on the internet or an intranet, without prior
written permission. Permission can be requested from either ISO at the address below or ISO’s member body in the country of
the requester.
ISO copyright office
Case postale 56 • CH-1211 Geneva 20
Tel. + 41 22 749 01 11
Fax + 41 22 749 09 47
E-mail copyright@iso.org
Web www.iso.org
Published in Switzerland
ii © ISO 2015 – All rights reserved
---------------------- Page: 8 ----------------------
SIST EN ISO 13845:2015
ISO 13845:2015(E)
Contents Page
Foreword .iv
1 Scope . 1
2 Principle . 1
3 Test parameters and requirements . 1
4 Apparatus . 1
5 Test pieces preparation . 2
6 Procedure. 2
7 Test report . 3
Annex A (normative) Test parameters . 5
© ISO 2015 – All rights reserved iii
---------------------- Page: 9 ----------------------
SIST EN ISO 13845:2015
ISO 13845:2015(E)
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards
bodies (ISO member bodies). The work of preparing International Standards is normally carried out
through ISO technical committees. Each member body interested in a subject for which a technical
committee has been established has the right to be represented on that committee. International
organizations, governmental and non-governmental, in liaison with ISO, also take part in the work.
ISO collaborates closely with the International Electrotechnical Commiss
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.