oSIST prEN ISO 3834-3:2021

Quality requirements for fusion welding of metallic materials - Part 3: Standard quality requirements (ISO/FDIS 3834-3:2020)

Qualitätsanforderungen für das Schmelzschweißen von metallischen Werkstoffen - Teil 3: Standard-Qualitätsanforderungen (ISO/FDIS 3834-3:2020)

Dieses Dokument definiert Standard-Qualitätsanforderungen beim Schmelzschweißen von metallischen Werkstoffen in Werkstätten und/oder auf Baustellen.

Exigences de qualité en soudage par fusion des matériaux métalliques - Partie 3: Exigences de qualité normale (ISO/FDIS 3834-3:2020)

Zahteve za kakovost pri talilnem varjenju kovinskih materialov - 3. del: Standardne zahteve za kakovost (ISO/FDIS 3834-3:2020)

Standards Content (sample)

SLOVENSKI STANDARD
oSIST prEN ISO 3834-3:2021
01-februar-2021

Zahteve za kakovost pri talilnem varjenju kovinskih materialov - 3. del: Standardne

zahteve za kakovost (ISO/FDIS 3834-3:2020)

Quality requirements for fusion welding of metallic materials - Part 3: Standard quality

requirements (ISO/FDIS 3834-3:2020)

Qualitätsanforderungen für das Schmelzschweißen von metallischen Werkstoffen - Teil

3: Standard-Qualitätsanforderungen (ISO/FDIS 3834-3:2020)
Exigences de qualité en soudage par fusion des matériaux métalliques - Partie 3:
Exigences de qualité normale (ISO/FDIS 3834-3:2020)
Ta slovenski standard je istoveten z: prEN ISO 3834-3
ICS:
03.120.99 Drugi standardi v zvezi s Other standards related to
kakovostjo quality
25.160.10 Varilni postopki in varjenje Welding processes
oSIST prEN ISO 3834-3:2021 en,fr,de

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
oSIST prEN ISO 3834-3:2021
---------------------- Page: 2 ----------------------
oSIST prEN ISO 3834-3:2021
FINAL
INTERNATIONAL ISO/FDIS
DRAFT
STANDARD 3834-3
ISO/TC 44/SC 10
Quality requirements for fusion
Secretariat: DIN
welding of metallic materials —
Voting begins on:
2020-12-15
Part 3:
Voting terminates on:
Standard quality requirements
2021-03-09
Exigences de qualité en soudage par fusion des matériaux
métalliques —
Partie 3: Exigences de qualité normale
ISO/CEN PARALLEL PROCESSING
RECIPIENTS OF THIS DRAFT ARE INVITED TO
SUBMIT, WITH THEIR COMMENTS, NOTIFICATION
OF ANY RELEVANT PATENT RIGHTS OF WHICH
THEY ARE AWARE AND TO PROVIDE SUPPOR TING
DOCUMENTATION.
IN ADDITION TO THEIR EVALUATION AS
Reference number
BEING ACCEPTABLE FOR INDUSTRIAL, TECHNO-
ISO/FDIS 3834-3:2020(E)
LOGICAL, COMMERCIAL AND USER PURPOSES,
DRAFT INTERNATIONAL STANDARDS MAY ON
OCCASION HAVE TO BE CONSIDERED IN THE
LIGHT OF THEIR POTENTIAL TO BECOME STAN-
DARDS TO WHICH REFERENCE MAY BE MADE IN
NATIONAL REGULATIONS. ISO 2020
---------------------- Page: 3 ----------------------
oSIST prEN ISO 3834-3:2021
ISO/FDIS 3834-3:2020(E)
COPYRIGHT PROTECTED DOCUMENT
© ISO 2020

All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may

be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting

on the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address

below or ISO’s member body in the country of the requester.
ISO copyright office
CP 401 • Ch. de Blandonnet 8
CH-1214 Vernier, Geneva
Phone: [phone]
Email: [e-mail]
Website: www.iso.org
Published in Switzerland
ii © ISO 2020 – All rights reserved
---------------------- Page: 4 ----------------------
oSIST prEN ISO 3834-3:2021
ISO/FDIS 3834-3:2020(E)
Contents Page

Foreword ........................................................................................................................................................................................................................................iv

1 Scope ................................................................................................................................................................................................................................. 1

2 Normative references ...................................................................................................................................................................................... 1

3 Terms and definitions ..................................................................................................................................................................................... 1

4 Use of this document ........................................................................................................................................................................................ 1

5 Review of requirements and technical review ...................................................................................................................... 2

5.1 General ........................................................................................................................................................................................................... 2

5.2 Review of requirements .................................................................................................................................................................. 2

5.3 Technical review .................................................................................................................................................................................... 2

6 Sub-contracting ...................................................................................................................................................................................................... 3

7 Welding personnel.............................................................................................................................................................................................. 3

7.1 General ........................................................................................................................................................................................................... 3

7.2 Welders and welding operators ............................................................................................................................................... 3

7.3 Welding coordination personnel ............................................................................................................................................. 3

8 Inspection and testing personnel ....................................................................................................................................................... 4

8.1 General ........................................................................................................................................................................................................... 4

8.2 Non-destructive testing personnel ........................................................................................................................................ 4

9 Equipment ................................................................................................................................................................................................................... 4

9.1 Production and test equipment ................................................................................................................................................ 4

9.2 Description of production equipment ................................................................................................................................ 4

9.3 Suitability and maintenance of equipment .................................................................................................................... 5

10 Welding and related activities ................................................................................................................................................................ 5

10.1 Production planning ........................................................................................................................................................................... 5

10.2 Welding procedure specifications .......................................................................................................................................... 5

10.3 Qualification of the welding procedures ........................................................................................................................... 5

10.4 Work instructions ................................................................................................................................................................................. 6

11 Storage and handling welding consumables ........................................................................................................................... 6

12 Storage of parent materials ....................................................................................................................................................................... 6

13 Post-weld heat treatment ............................................................................................................................................................................ 6

14 Inspection and testing .................................................................................................................................................................................... 6

14.1 General ........................................................................................................................................................................................................... 6

14.2 Inspection and testing before welding ............................................................................................................................... 7

14.3 Inspection and testing during welding .............................................................................................................................. 7

14.4 Inspection and testing after welding ................................................................................................................................... 7

14.5 Inspection and test status .............................................................................................................................................................. 8

15 Non-conformance and corrective actions ................................................................................................................................... 8

16 Calibration and validation of measuring, inspection and test equipment ...............................................8

17 Identification and traceability ............................................................................................................................................................... 8

18 Quality records ....................................................................................................................................................................................................... 9

Bibliography .............................................................................................................................................................................................................................10

© ISO 2020 – All rights reserved iii
---------------------- Page: 5 ----------------------
oSIST prEN ISO 3834-3:2021
ISO/FDIS 3834-3:2020(E)
Foreword

ISO (the International Organization for Standardization) is a worldwide federation of national standards

bodies (ISO member bodies). The work of preparing International Standards is normally carried out

through ISO technical committees. Each member body interested in a subject for which a technical

committee has been established has the right to be represented on that committee. International

organizations, governmental and non-governmental, in liaison with ISO, also take part in the work.

ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of

electrotechnical standardization.

The procedures used to develop this document and those intended for its further maintenance are

described in the ISO/IEC Directives, Part 1. In particular, the different approval criteria needed for the

different types of ISO documents should be noted. This document was drafted in accordance with the

editorial rules of the ISO/IEC Directives, Part 2 (see www .iso .org/ directives).

Attention is drawn to the possibility that some of the elements of this document may be the subject of

patent rights. ISO shall not be held responsible for identifying any or all such patent rights. Details of

any patent rights identified during the development of the document will be in the Introduction and/or

on the ISO list of patent declarations received (see www .iso .org/ patents).

Any trade name used in this document is information given for the convenience of users and does not

constitute an endorsement.

For an explanation of the voluntary nature of standards, the meaning of ISO specific terms and

expressions related to conformity assessment, as well as information about ISO's adherence to the

World Trade Organization (WTO) principles in the Technical Barriers to Trade (TBT), see www .iso .org/

iso/ foreword .html.

This document was prepared by Technical Committee ISO/TC 44, Welding and allied processes,

Subcommittee SC 10, Quality management in the field of welding, in collaboration with the European

Committee for Standardization (CEN) Technical Committee CEN/TC 121, Welding and allied processes,

in accordance with the Agreement on technical cooperation between ISO and CEN (Vienna Agreement).

This third edition cancels and replaces the second edition (ISO 3834-3:2005), of which it constitutes a

minor revision.
The main changes compared to the previous edition are as follows:
— editorial revisions;
— update of references to the latest edition of ISO 3834-5.

— rewrite of Clause 16 on calibration and validation of measuring, inspection and test equipment.

A list of all parts in the ISO 3834 series can be found on the ISO website.

Any feedback or questions on this document should be directed to the user’s national standards body. A

complete listing of these bodies can be found at www .iso .org/ members .html.

Official interpretations, where they exist, are available from this page: https:// committee .iso .org/ sites/

tc44/ home/ interpretation .html.
iv © ISO 2020 – All rights reserved
---------------------- Page: 6 ----------------------
oSIST prEN ISO 3834-3:2021
FINAL DRAFT INTERNATIONAL STANDARD ISO/FDIS 3834-3:2020(E)
Quality requirements for fusion welding of metallic
materials —
Part 3:
Standard quality requirements
1 Scope

This document defines standard quality requirements for fusion welding of metallic materials both in

workshops and at field installation sites.
2 Normative references

The following documents are referred to in the text in such a way that some or all of their content

constitutes requirements of this document. For dated references, only the edition cited applies. For

undated references, the latest edition of the referenced document (including any amendments) applies.

ISO 3834-1:—, Quality requirements for fusion welding of metallic materials — Part 1: Criteria for the

selection of the appropriate level of quality requirements

ISO/DIS 3834-5:—, Quality requirements for fusion welding of metallic materials — Part 5: Documents

with which it is necessary to conform to claim conformity to the quality requirements of ISO 3834-2,

ISO 3834-3 or ISO 3834-4
3 Terms and definitions

For the purposes of this document, the terms and definitions given in ISO 3834-1 apply.

ISO and IEC maintain terminological databases for use in standardization at the following addresses:

— ISO Online browsing platform: available at https:// www .iso .org/ obp
— IEC Electropedia: available at http:// www .electropedia .org/
4 Use of this document
For general information on the use of this document, ISO 3834-1 shall be used.

In order to fulfil the quality requirements given in this document, the conformity to relevant documents

given in ISO 3834-5 shall be verified.

In certain situations, e.g. where manufacturing is more suited to ISO 3834-4, or where particular

operations, such as heat treatment, are not undertaken, the requirements detailed in this document

may be selectively amended or deleted.

Otherwise, the requirements contained within this document shall be adopted in full.

1) Under preparation. (Stage at the time of publication: ISO/DIS 3834-1:2020).
2) Under preparation. (Stage at the time of publication: ISO/DIS 3834-1:2020).
© ISO 2020 – All rights reserved 1
---------------------- Page: 7 ----------------------
oSIST prEN ISO 3834-3:2021
ISO/FDIS 3834-3:2020(E)
5 Review of requirements and technical review
5.1 General

The manufacturer shall review the contractual requirements and any other requirements, together

with any technical data provided by the purchaser or in-house data when the construction is designed

by the manufacturer. The manufacturer shall establish that all information necessary to carry out

the manufacturing operations is complete and available prior to the commencement of the work. The

manufacturer shall affirm its capability to meet all requirements and shall ensure adequate planning of

all quality-related activities.
The review of requirements is carried out by the manufacturer to verify that:
— the work content is within its capability to perform;
— sufficient resources are available to achieve delivery schedules; and
— documentation is clear and unambiguous.

The manufacturer shall ensure that any variations between the contract and any previ

...