SIST EN 60317-35:2014/A2:2024

Specifications for particular types of winding wires - Part 35: Solderable polyurethane enamelled round copper wire, class 155, with a bonding layer (IEC 60317-35:2013/AMD2:2024)

Technische Lieferbedingungen für bestimmte Typen von Wickeldrähten - Teil 35: Runddrähte aus Kupfer, verzinnbar und verbackbar, lackisoliert mit Polyurethan, Klasse 155 (IEC 60317-35:2013/AMD2:2024)

Spécifications pour types particuliers de fils de bobinage - Partie 35: Fil brasable de section circulaire en cuivre émaillé avec polyuréthane, classe 155, avec une couche adhérente (IEC 60317-35:2013/AMD2:2024)

Specifikacije za posebne vrste navijalnih žic - 35. del: S poliuretanom emajlirana okrogla bakrena žica, za spajkanje, razred 155, s spajalno plastjo - Dopolnilo A2 (IEC 60317-35:2013/AMD2:2024)

General Information

• Status: Published
• Public Enquiry End Date: 30-Oct-2023
• Publication Date: 18-Aug-2024
• ICS: 29.060.10 - Wires
• ICS: 77.150.30 - Copper products
• Technical Committee: I09 - Imaginarni 09
• Current Stage: 6060 - National Implementation/Publication (Adopted Project)
• Start Date: 07-Aug-2024
• Due Date: 12-Oct-2024
• Completion Date: 19-Aug-2024
• Ref Project: EN 60317-35:2014/A2:2024 - Specifications for particular types of winding wires - Part 35: Solderable polyurethane enamelled round copper wire, class 155, with a bonding layer

Relations

• Amends: SIST EN 60317-35:2014 - Specifications for particular types of winding wires - Part 35: Solderable polyurethane enamelled round copper wire, class 155, with a bonding layer
• Effective Date: 01-Sep-2024

Overview

The SIST EN 60317-35:2014/A2:2024 standard, issued by the CLC and approved by CENELEC, specifies the requirements for particular types of winding wires, focusing on solderable polyurethane enamelled round copper wire, class 155, with a bonding layer. This amendment (A2) builds upon the original EN 60317-35:2014 standard and aligns with the international IEC 60317-35:2013/AMD2:2024 to ensure harmonization of technical specifications across Europe.

The document is intended for manufacturers, suppliers, and users of winding wires used primarily in electrical and electromechanical applications. It establishes uniform standards for wire construction, solderability, insulation, and performance to enhance product reliability and interoperability.

Key Topics

• Type of Wire: The standard applies specifically to round copper wires coated with a polyurethane enamel insulation layer, optimized for soldering processes.
• Class 155 Insulation: Refers to thermal classification allowing the wire to operate reliably at temperatures up to 155°C.
• Bonding Layer Feature: This additional bonding layer improves the soldering process, ensuring strong mechanical and electrical connections.
• Test Methods and Compliance: EN 60317-35:2014/A2 refers to test methods outlined in IEC 60317-0-1:2013 and its amendments, with precedence given to this standard in case of inconsistencies.
• Electrical Resistance: The electrical resistance requirements are based on the general specifications in IEC 60317-0-1, ensuring consistent conductivity and performance.
• Normative References: The standard integrates with other international standards, especially IEC 60317-0-1 and its amendments, emphasizing harmonized technical definitions and test procedures.

Applications

This standard is valuable for industries requiring high-quality winding wires with excellent solderability and thermal endurance, such as:

• Electric motors and generators: Wires that must withstand thermal stresses and provide reliable electrical insulation.
• Transformers and inductors: Components depending on insulated copper wires capable of enduring high temperatures during operation and assembly soldering.
• Electromechanical components: Including solenoids, coils, and relays where durable and solderably insulated wires are crucial.
• Automotive and aerospace electronics: Where standards compliance ensures safety, performance, and durability under demanding conditions.
• Consumer and industrial electronics: Enabling consistent manufacturing quality and interchangeability of parts.

Related Standards

• IEC 60317 Series: EN 60317-35 is part of a larger suite of standards under the IEC 60317 umbrella focusing on specifications for particular types of winding wires. It specifically supplements:

  • IEC 60317-0-1:2013: General requirements for enamelled round copper wires.
  • IEC 60317-0-1:2013/AMD1:2019: Amendments offering updates on test methods and specifications.

• National Implementations: Members of CENELEC, including Austria, Germany, France, the UK, and others, adopt this standard as a national standard without modification, ensuring consistency across the European market.

• ISO/IEC Directives: The standard is developed and maintained according to ISO/IEC Directives Parts 1 and 2, encouraging international cooperation and transparency in standardization.

---

Keywords: SIST EN 60317-35:2014/A2:2024, solderable polyurethane enamelled round copper wire, winding wires standard, class 155 insulation, copper winding wire specifications, CLC standard, electrical insulation wire, winding wire solderability, IEC 60317-35 amendment, electrotechnical wire standards, thermal resistant winding wire.

Standards Content (Sample)

SLOVENSKI STANDARD
01-september-2024
Specifikacije za posebne vrste navijalnih žic - 35. del: S poliuretanom emajlirana
okrogla bakrena žica, za spajkanje, razred 155, s spajalno plastjo - Dopolnilo A2
(IEC 60317-35:2013/AMD2:2024)
Specifications for particular types of winding wires - Part 35: Solderable polyurethane
enamelled round copper wire, class 155, with a bonding layer (IEC 60317-
35:2013/AMD2:2024)
Technische Lieferbedingungen für bestimmte Typen von Wickeldrähten - Teil 35:
Runddrähte aus Kupfer, verzinnbar und verbackbar, lackisoliert mit Polyurethan, Klasse
155 (IEC 60317-35:2013/AMD2:2024)
Spécifications pour types particuliers de fils de bobinage - Partie 35: Fil brasable de
section circulaire en cuivre émaillé avec polyuréthane, classe 155, avec une couche
adhérente (IEC 60317-35:2013/AMD2:2024)
Ta slovenski standard je istoveten z: EN 60317-35:2014/A2:2024
ICS:
29.060.10 Žice Wires
77.150.30 Bakreni izdelki Copper products
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

EUROPEAN STANDARD EN 60317-35:2014/A2

NORME EUROPÉENNE
EUROPÄISCHE NORM August 2024
ICS 29.060.10
English Version
Specifications for particular types of winding wires - Part 35:
Solderable polyurethane enamelled round copper wire, class
155, with a bonding layer
(IEC 60317-35:2013/AMD2:2024)
Spécifications pour types particuliers de fils de bobinage - Technische Lieferbedingungen für bestimmte Typen von
Partie 35: Fil brasable de section circulaire en cuivre Wickeldrähten - Teil 35: Runddrähte aus Kupfer, verzinnbar
émaillé avec polyuréthane, classe 155, avec une couche und verbackbar, lackisoliert mit Polyurethan, Klasse 155
adhérente (IEC 60317-35:2013/AMD2:2024)
(IEC 60317-35:2013/AMD2:2024)
This amendment A2 modifies the European Standard EN 60317-35:2014; it was approved by CENELEC on 2024-07-19. CENELEC
members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this amendment the
status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC
Management Centre or to any CENELEC member.
This amendment exists in three official versions (English, French, German). A version in any other language made by translation under the
responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the same status as
the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic,
Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the
Netherlands, Norway, Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Türkiye and the United Kingdom.

European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2024 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members.
Ref. No. EN 60317-35:2014/A2:2024 E

European foreword
The text of document 55/1989/CDV, future IEC 60317-35/AMD2, prepared by IEC/TC 55 "Winding
wires" was submitted to the IEC-CENELEC parallel vote and approved by CENELEC as EN 60317-
35:2014/A2:2024.
The following dates are fixed:
• latest date by which the document has to be implemented at national (dop) 2025-04-19
level by publication of an identical national standard or by endorsement
• latest date by which the national standards conflicting with the (dow) 2027-07-19
document have to be withdrawn
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CENELEC shall not be held responsible for identifying any or all such patent rights.
Any feedback and questions on this document should be directed to the users’ national committee. A
complete listing of these bodies can be found on the CENELEC website.
Endorsement notice
The text of the International Standard IEC 60317-35:2013/AMD2:2024 was approved by CENELEC as
a European Standard without any modification.
Annex ZA
(normative)
Normative references to international publications
with their corresponding European publications
The following documents are referred to in the text in such a way that some or all of their content
constitutes requirements of this document. For dated references, only the edition cited applies. For
undated references, the latest edition of the referenced document (including any amendments)
applies.
NOTE 1  Where an International Publication has been modified by common modifications, indicated by (mod),
the relevant EN/HD applies.
NOTE 2  Up-to-date information on the latest versions of the European Standards listed in this annex is available
here: www.cencenelec.eu.
Replace the references with:
Publication Year Title EN/HD Year
IEC 60317-0-1 2013 Specifications for particular types of EN 60317-0-1 2014
winding wires - Part 0-1: General
requirements - Enamelled round copper
wire
+ AMD1 2019 + A1 2019
IEC 60317-35 ®
Edition 2.0 2024-06
INTERNATIONAL
STANDARD
NORME
INTERNATIONALE
AMENDMENT 2
AMENDEMENT 2
Specifications for particular types of winding wires –

Part 35: Solderable polyurethane enamelled round copper wire, class 155, with a

bonding layer
Spécifications pour types particuliers de fils de bobinage –

Partie 35: Fil brasable de section circulaire en cuivre émaillé avec polyuréthane,

classe 155, avec une couche adhérente

INTERNATIONAL
ELECTROTECHNICAL
COMMISSION
COMMISSION
ELECTROTECHNIQUE
INTERNATIONALE
ICS 29.060.10  ISBN 978-2-8322-9021-7
...