SIST EN ISO 9018:2004

Destructive tests on welds in metallic materials - Tensile test on cruciform and lapped joints (ISO 9018:2003)

This standard specifies the sizes of test pieces and specimens and the test procedure for carrying out tensile tests in order to determine the tensile strength and the location of fracture of a welded joint.

Zerstörende Prüfung von Schweißverbindungen an metallischen Werkstoffen - Zugversuch am Doppel-T-Stoß und Überlappstoß (ISO 9018:2003)

Diese Internationale Norm legt die Abmessungen der Prüfstücke und der Proben sowie die Verfahren fest, um Zugprüfungen zur Bestimmung der Zugfestigkeit und der Bruchlage in geschweißten Verbindungen bei querbeanspruchten Kehlnähten durchzuführen.
Diese Norm bezieht sich auf metallische Werkstoffe mit geschweißten Doppel-T- und Überlappstößen an Blechen ).
Bezüglich der Beurteilung der Prüfergebnisse werden keine Informationen gegeben.

Essais destructifs des soudures sur matériaux métalliques - Essai de traction des assemblages en croix et a recouvrement (ISO 9018:2003)

L'ISO 9018:2003 spécifie les dimensions des pièces d'essai et des éprouvettes ainsi que le mode opératoire d'essai de traction pour déterminer la résistance à la traction et l'emplacement de la cassure pour des assemblages soudés comportant des soudures d'angle soumises à des contraintes transversales. Elle s'applique aux assemblages en croix et à recouvrement de tôles en matériaux métalliques.
L'ISO 9018:2003 ne fournit pas d'informations sur l'évaluation des résultats d'essai.

Porušitveno preskušanje zvarov na kovinskih materialih - Natezni preskus na križnih in prekrovnih spojih (ISO 9018:2003)

General Information

• Status: Withdrawn
• Publication Date: 31-May-2004
• Withdrawal Date: 17-Nov-2015
• ICS: 25.160.40 - Welded joints and welds
• Technical Committee: VAR - Welding
• Current Stage: 9900 - Withdrawal (Adopted Project)
• Start Date: 18-Nov-2015
• Due Date: 11-Dec-2015
• Completion Date: 18-Nov-2015
• Directive: 97/23/EC - Directive 97/23/EC of the European Parliament and of the Council of 29 May 1997 on the approximation of the laws of the Member States concerning pressure equipment
• Mandate: M/071 - Mandate to CEN for standardization in the field of Pressure equipment
• Ref Project: EN ISO 9018:2003 - Destructive tests on welds in metallic materials - Tensile test on cruciform and lapped joints (ISO 9018:2003)

Relations

• Replaced By: SIST EN ISO 9018:2016 - Destructive tests on welds in metallic materials - Tensile test on cruciform and lapped joints (ISO 9018:2015)
• Effective Date: 01-Jan-2016
• Replaced By: SIST EN ISO 9018:2016 - Destructive tests on welds in metallic materials - Tensile test on cruciform and lapped joints (ISO 9018:2015)
• Effective Date: 08-Jun-2022

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN ISO 9018:2004
01-junij-2004
Porušitveno preskušanje zvarov na kovinskih materialih - Natezni preskus na
križnih in prekrovnih spojih (ISO 9018:2003)
Destructive tests on welds in metallic materials - Tensile test on cruciform and lapped
joints (ISO 9018:2003)
Zerstörende Prüfung von Schweißverbindungen an metallischen Werkstoffen -
Zugversuch am Doppel-T-Stoß und Überlappstoß (ISO 9018:2003)
Essais destructifs des soudures sur matériaux métalliques - Essai de traction des
assemblages en croix et a recouvrement (ISO 9018:2003)
Ta slovenski standard je istoveten z: EN ISO 9018:2003
ICS:
25.160.40 Varjeni spoji in vari Welded joints
SIST EN ISO 9018:2004 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN ISO 9018:2004

---------------------- Page: 2 ----------------------

SIST EN ISO 9018:2004
EUROPEAN STANDARD
EN ISO 9018
NORME EUROPÉENNE
EUROPÄISCHE NORM
December 2003
ICS 25.160.40
English version
Destructive tests on welds in metallic materials - Tensile test on
cruciform and lapped joints (ISO 9018:2003)
Essais destructifs des soudures sur matériaux métalliques - Zerstörende Prüfung von Schweißverbindungen an
Essai de traction des assemblages en croix et à metallischen Werkstoffen - Zugversuch am Doppel-T-Stoß
recouvrement (ISO 9018:2003) und Überlappstoß (ISO 9018:2003)
This European Standard was approved by CEN on 10 November 2003.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national
standards may be obtained on application to the Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CEN member into its own language and notified to the Management Centre has the same status as the official
versions.
CEN members are the national standards bodies of Austria, Belgium, Czech Republic, Denmark, Finland, France, Germany, Greece,
Hungary, Iceland, Ireland, Italy, Luxembourg, Malta, Netherlands, Norway, Portugal, Slovakia, Spain, Sweden, Switzerland and United
Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: rue de Stassart, 36  B-1050 Brussels
© 2003 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 9018:2003 E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------

SIST EN ISO 9018:2004
EN ISO 9018:2003 (E)
CORRECTED  2004-03-03
Foreword
This document (EN ISO 9018:2003) has been prepared by Technical Committee ISO/TC 44
"Welding and allied processes" in collaboration with Technical Committee CEN/TC 121
"Welding", the secretariat of which is held by DS.
This European Standard shall be given the status of a national standard, either by publication of
an identical text or by endorsement, at the latest by June 2004, and conflicting national
standards shall be withdrawn at the latest by June 2004.
According to the CEN/CENELEC Internal Regulations, the national standards organizations of
the following countries are bound to implement this European Standard: Austria, Belgium, Czech
Republic, Denmark, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy,
Luxembourg, Malta, Netherlands, Norway, Portugal, Slovakia, Spain, Sweden, Switzerland and
the United Kingdom.
Endorsement notice
The text of ISO 9018:2003 has been approved by CEN as EN ISO 9018:2003 without any
modifications.
2

---------------------- Page: 4 ----------------------

SIST EN ISO 9018:2004


INTERNATIONAL ISO
STANDARD 9018
First edition
2003-12-01


Destructive tests on welds in metallic
materials — Tensile test on cruciform and
lapped joints
Essais destructifs des soudures sur matériaux métalliques — Essai de
traction des assemblages en croix et à recouvrement




Reference number
ISO 9018:2003(E)
©
ISO 2003

---------------------- Page: 5 ----------------------

SIST EN ISO 9018:2004
ISO 9018:2003(E)
PDF disclaimer
This PDF file may contain embedded typefaces. In accordance with Adobe's licensing policy, this file may be printed or viewed but
shall not be edited unless the typefaces which are embedded are licensed to and installed on the computer performing the editing. In
downloading this file, parties accept therein the responsibility of not infringing Adobe's licensing policy. The ISO Central Secretariat
accepts no liability in this area.
Adobe is a trademark of Adobe Systems Incorporated.
Details of the software products used to create this PDF file can be found in the General Info relative to the file; the PDF-creation
parameters were optimized for printing. Every care has been taken to ensure that the file is suitable for use by ISO member bodies. In
the unlikely event that a problem relating to it is found, please inform the Central Secretariat at the address given below.


©  ISO 2003
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or by any means,
electronic or mechanical, including photocopying and microfilm, without permission in writing from either ISO at the address below or
ISO's member body in the country of the requester.
ISO copyright office
Case postale 56 • CH-1211 Geneva 20
Tel. + 41 22 749 01 11
Fax + 41 22 749 09 47
E-mail [e-mail]
Web www.iso.org
Published in Switzerland

ii © ISO 2003 — All rights reserved

---------------------- Page: 6 ----------------------

SIST EN ISO 9018:2004
ISO 9018:2003(E)
Contents Page
Foreword. iv
Introduction . v
1 Scope. 1
2 Normative references . 1
3 Symbols and abbreviated terms. 1
4 Principle . 2
5 Test pieces and test specimens . 3
6 Method of testing . 6
7 Test report. 6
8 Evaluation of results. 7
Annex A (informative) Example of a test report . 8

© ISO 2003 — All rights reserved iii

---------------------- Page: 7 ----------------------

SIST EN ISO 9018:2004
ISO 9018:2003(E)
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies
(ISO member bodies). The work of preparing International Standards is normally carried out through ISO
technical committees. Each member body interested in a subject for which a technical committee has been
established has the right to be represented on that committee. International organizations, governmental and
non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the
International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization.
International Standards are drafted in accordance with the rules given in the ISO/IEC Directives, Part 2.
The main task of technical committees is to prepare International Standards. Draft International Standards
adopted by the technical committees are circulated to the member bodies for voting. Publication as an
International Standard requires approval by at least 75 % of the member bodies casting a vote.
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent
rights. ISO shall not be held responsible for identifying any or all such patent rights.
ISO 9018 was prepared by Technical Committee ISO/TC 44, Welding and allied processes, Subcommittee
SC 5, Testing and inspection of welds.

iv © ISO 2003 — All rights reserved

---------------------- Page: 8 ----------------------

SIST EN ISO 9018:2004
ISO 9018:2003(E)
Introduction
Requests for official interpretations of any aspect of this standard should be directed to the Secretariat of
ISO/TC 44/SC 5 via your national standards body, a complete listing which can be found at www.iso.org

© ISO 2003 — All rights reserved v

---------------------- Page: 9 ----------------------

SIST EN ISO 9018:2004

---------------------- Page: 10 ----------------------

SIST EN ISO 9018:2004
INTERNATIONAL STANDARD ISO 9018:2003(E)

Destructive tests on welds in metallic materials — Tensile test
on cruciform and lapped joints
1 Scope
This International Standard specifies the sizes of test pieces and test specimens and the proce
...