iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
SIST

SIST ENV 1997-3:2004

(Main)

Eurocode 7: Geotechnical design - Part 3: Design assisted by field testing

Eurocode 7: Geotechnical design - Part 3: Design assisted by field testing

Eurocode 7 applies to the geotechnical aspects of the design of buildings and civil engineering works. It is subdivided into various separate parts. See 1.1.2. Eurocode 7 is concerned with the requirements for strength, stability, serviceability and durability of the structures. Other requirements, e.g. concerning thermal or sound insulation, are not considered.

Eurocode 7: Entwurf, Berechnung und Bemessung in der Geotechnik - Teil 3: Felduntersuchungen für die geotechnische Bemessung

Eurocode 7: Calcul géotechnique - Partie 3: Calcul sur la base d'essais en place

Eurocode 7: Geotehnično projektiranje - 3. del: Projektiranje s pomočjo preskušanja na terenu

General Information

Status
Withdrawn
Publication Date
31-Aug-2004
Withdrawal Date
12-Jun-2007
ICS
91.010.30 - Technical aspects
93.020 - Earthworks. Excavations. Foundation construction. Underground works
Technical Committee
KON - Structures
Current Stage
9900 - Withdrawal (Adopted Project)
Start Date
13-Jun-2007
Due Date
06-Jul-2007
Completion Date
13-Jun-2007
Directive
89/106/EEC - Construction products
Mandate
M/BC/CEN/89/11 - Framework mandate to CEN on Eurocode work : execution of a standardization programme on Eurocodes for the structural design of building and civil engineering works
Ref Project
ENV 1997-3:1999 - Eurocode 7: Geotechnical design - Part 3: Design assisted by field testing

Relations

Replaced By
SIST EN 1997-2:2007 - Eurocode 7 - Geotechnical design - Part 2: Ground investigation and testing
Effective Date
01-Jun-2007

Buy Standard

ENV 1997-3:2004ENV 1997-3:2004
PreviousNext
Standard
ENV 1997-3:2004
English language
146 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
SIST ENV 1997-3:2004
01-september-2004
(XURFRGH*HRWHKQLþQRSURMHNWLUDQMHGHO3URMHNWLUDQMHVSRPRþMR
SUHVNXãDQMDQDWHUHQX
Eurocode 7: Geotechnical design - Part 3: Design assisted by field testing
Eurocode 7: Entwurf, Berechnung und Bemessung in der Geotechnik - Teil 3:
Felduntersuchungen für die geotechnische Bemessung
Eurocode 7: Calcul géotechnique - Partie 3: Calcul sur la base d'essais en place
Ta slovenski standard je istoveten z: ENV 1997-3:1999
ICS:
91.010.30 7HKQLþQLYLGLNL Technical aspects
93.020 Zemeljska dela. Izkopavanja. Earthworks. Excavations.
Gradnja temeljev. Dela pod Foundation construction.
zemljo Underground works
SIST ENV 1997-3:2004 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST ENV 1997-3:2004

---------------------- Page: 2 ----------------------

SIST ENV 1997-3:2004

---------------------- Page: 3 ----------------------

SIST ENV 1997-3:2004

---------------------- Page: 4 ----------------------

SIST ENV 1997-3:2004

---------------------- Page: 5 ----------------------

SIST ENV 1997-3:2004

---------------------- Page: 6 ----------------------

SIST ENV 1997-3:2004

---------------------- Page: 7 ----------------------

SIST ENV 1997-3:2004

---------------------- Page: 8 ----------------------

SIST ENV 1997-3:2004

---------------------- Page: 9 ----------------------

SIST ENV 1997-3:2004

---------------------- Page: 10 ----------------------

SIST ENV 1997-3:2004

---------------------- Page: 11 ----------------------

SIST ENV 1997-3:2004

---------------------- Page: 12 ----------------------

SIST ENV 1997-3:2004

---------------------- Page: 13 ----------------------

SIST ENV 1997-3:2004

---------------------- Page: 14 ----------------------

SIST ENV 1997-3:2004

---------------------- Page: 15 ----------------------

SIST ENV 1997-3:2004

---------------------- Page: 16 ----------------------

SIST ENV 1997-3:2004

---------------------- Page: 17 ----------------------

SIST ENV 1997-3:2004

---------------------- Page: 18 ----------------------

SIST ENV 1997-3:2004

---------------------- Page: 19 ----------------------

SIST ENV 1997-3:2004

---------------------- Page: 20 ----------------------

SIST ENV 1997-3:2004

---------------------- Page: 21 ----------------------

SIST ENV 1997-3:2004

---------------------- Page: 22 ----------------------

SIST ENV 1997-3:2004

---------------------- Page: 23 ----------------------

SIST ENV 1997-3:2004

---------------------- Page: 24 ----------------------

SIST ENV 1997-3:2004

---------------------- Page: 25 ----------------------

SIST ENV 1997-3:2004

---------------------- Page: 26 ----------------------

SIST ENV 1997-3:2004

---------------------- Page: 27 ----------------------

SIST ENV 1997-3:2004

---------------------- Page: 28 ----------------------

SIST ENV 1997-3:2004

---------------------- Page: 29 ----------------------

SIST ENV 1997-3:2004

---------------------- Page: 30 ----------------------

SIST ENV 1997-3:2004

---------------------- Page: 31 ----------------------

SIST ENV 1997-3:2004

---------------------- Page: 32 ----------------------

SIST ENV 1997-3:2004

---------------------- Page: 33 ----------------------

SIST ENV 1997-3:2004

---------------------- Page: 34 ----------------------

SIST ENV 1997-3:2004

---------------------- Page: 35 ----------------------

SIST ENV 1997-3:2004

---------------------- Page: 36 ----------------------

SIST ENV 1997-3:2004

---------------------- Page: 37 ----------------------

SIST ENV 1997-3:2004

---------------------- Page: 38 ----------------------

SIST ENV 1997-3:2004

---------------------- Page: 39 ----------------------

SIST ENV 1997-3:2004

---------------------- Page: 40 ----------------------

SIST ENV 1997-3:2004

---------------------- Page: 41 ----------------------

SIST ENV 1997-3:2004

---------------------- Page: 42 ----------------------

SIST ENV 1997-3:2004

---------------------- Page: 43 ----------------------

SIST ENV 1997-3:2004

---------------------- Page: 44 ----------------------

SIST ENV 1997-3:2004

---------------------- Page: 45 ----------------------

SIST ENV 1997-3:2004

---------------------- Page: 46 ----------------------

SIST ENV 1997-3:2004

---------------------- Page: 47 ----------------------

SIST ENV 1997-3:2004

---------------------- Page: 48 ----------------------

SIST ENV 1997-3:2004

---------------------- Page: 49 ----------------------

SIST ENV 1997-3:2004

---------------------- Page: 50 ----------------------

SIST ENV 1997-3:2004

---------------------- Page: 51 ----------------------

SIST ENV 1997-3:2004

---------------------- Page: 52 ----------------------

SIST ENV 1997-3:2004

---------------------- Page: 53 ----------------------

SIST ENV 1997-3:2004

---------------------- Page: 54 ----------------------

SIST ENV 1997-3:2004

---------------------- Page: 55 ----------------------

SIST ENV 1997-3:2004

---------------------- Page: 56 ----------------------

SIST ENV 1997-3:2004

---------------------- Page: 57 ----------------------

SIST ENV 1997-3:2004

---------------------- Page: 58 ----------------------

SIST ENV 1997-3:2004

---------------------- Page: 59 ----------------------

SIST ENV 1997-3:2004

---------------------- Page: 60 ----------------------

SIST ENV 1997-3:2004

---------------------- Page: 61 ----------------------

SIST ENV 1997-3:2004

---------------------- Page: 62 ----------------------

SIST ENV 1997-3:2004

---------------------- Page: 63 ----------------------

SIST ENV 1997-3:2004

---------------------- Page: 64 ----------------------

SIST ENV 1997-3:2004

---------------------- Page: 65 ----------------------

SIST ENV 1997-3:2004

---------------------- Page: 66 ----------------------

SIST ENV 1997-3:2004

---------------------- Page: 67 ----------------------

SIST ENV 1997-3:2004

---------------------- Page: 68 ----------------------

SIST ENV 1997-3:2004

---------------------- Page: 69 ----------------------

SIST ENV 1997-3:2004

--------------------
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

SIST
SIST EN 1997-1:2005/A1:2014(Amendment)
Eurocode 7: Geotechnical design - Part 1: General rules
EN 1997-1:2004/A1:2013

(1) EN 1997-1 is intended to be used as a general basis for the geotechnical aspects of the design of buildings and civil engineering works.
(2) The following subjects are dealt with in EN 1997-1:
Section 1: General
Section 2: Basis of geotechnical design
Section 3: Geotechnical data
Section 4: Supervision of construction, monitoring and maintenance
Section 5: Fill, dewatering, ground improvement and reinforcement
Section 6: Spread foundations
Section 7: Pile foundations
Section 8: Anchorages
Section 9: Retaining structures
Section 10: Hydraulic failure
Section 11: Overall stability
Section 12: Embankments
(3) EN 1997-1 is accompanied by Annexes A to J, which provide:
- in A: recommended partial safety factor values; different values of the partial factors may be set by the National annex;
- in B to J: supplementary informative guidance such as internationally applied calculation methods.

  • Amendment
    19 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    20 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 1997-2:2007/AC:2010(Corrigendum)
Eurocode 7 - Geotechnical design - Part 2: Ground investigation and testing
EN 1997-2:2007/AC:2010

TC - Modifications in the English mother reference version to the Table of Contents, Clauses 1, 4, 5 and Annexes A, B, D, E, F, I, J, K and X.

  • Corrigendum
    9 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 1997-1:2005/AC:2009(Corrigendum)
Eurocode 7: Geotechnical design - Part 1: General rules
EN 1997-1:2004/AC:2009

(1) EN 1997-1 is intended to be used as a general basis for the geotechnical aspects of the design of buildings and civil engineering works.
(2) The following subjects are dealt with in EN 1997-1:
Section 1: General
Section 2: Basis of geotechnical design
Section 3: Geotechnical data
Section 4: Supervision of construction, monitoring and maintenance
Section 5: Fill, dewatering, ground improvement and reinforcement
Section 6: Spread foundations
Section 7: Pile foundations
Section 8: Anchorages
Section 9: Retaining structures
Section 10: Hydraulic failure
Section 11: Overall stability
Section 12: Embankments
(3) EN 1997-1 is accompanied by Annexes A to J, which provide:
- in A: recommended partial safety factor values; different values of the partial factors may be set by the National annex;
- in B to J: supplementary informative guidance such as internationally applied calculation methods.

  • Corrigendum
    24 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 1997-2:2007(Main)
Eurocode 7 - Geotechnical design - Part 2: Ground investigation and testing
EN 1997-2:2007

This EN 1997-2 is intended to be used in conjunction with EN  1997-1 and provides rules supplementary to EN 1997-1 related  to: planning and reporting of ground investigations, general  requirements for a number of commonly used laboratory and  field tests, interpretation and evaluation of test results,  derivation of values of geotechnical parameters and  coefficients. Additionally, examples of the application of field  test results to design are given.

  • Standard
    196 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 1997-1:2005(Main)
Eurocode 7: Geotechnical design - Part 1: General rules
EN 1997-1:2004

(1) EN 1997-1 is intended to be used as a general basis for the geotechnical aspects of the design of buildings and civil engineering works.
(2) The following subjects are dealt with in EN 1997-1:
Section 1: General
Section 2: Basis of geotechnical design
Section 3: Geotechnical data
Section 4: Supervision of construction, monitoring and maintenance
Section 5: Fill, dewatering, ground improvement and reinforcement
Section 6: Spread foundations
Section 7: Pile foundations
Section 8: Anchorages
Section 9: Retaining structures
Section 10: Hydraulic failure
Section 11: Overall stability
Section 12: Embankments
(3) EN 1997-1 is accompanied by Annexes A to J, which provide:
- in A: recommended partial safety factor values; different values of the partial factors may be set by the National annex;
- in B to J: supplementary informative guidance such as internationally applied calculation methods.

  • Standard
    168 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Standard – translation
    150 pages
    Slovenian language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 1997-1:2005/A101:2006(Slovenian language)
Evrokod 7: Geotehnično projektiranje – 1. del: Splošna pravila – Nacionalni dodatek

(1) EN 1997-1 is intended to be used as a general basis for the geotechnical aspects of the design of buildings and civil engineering works.
(2) The following subjects are dealt with in EN 1997-1:
Section 1: General
Section 2: Basis of geotechnical design
Section 3: Geotechnical data
Section 4: Supervision of construction, monitoring and maintenance
Section 5: Fill, dewatering, ground improvement and reinforcement
Section 6: Spread foundations
Section 7: Pile foundations
Section 8: Anchorages
Section 9: Retaining structures
Section 10: Hydraulic failure
Section 11: Overall stability
Section 12: Embankments
(3) EN 1997-1 is accompanied by Annexes A to J, which provide:
- in A: recommended partial safety factor values; different values of the partial factors may be set by the National annex;
- in B to J: supplementary informative guidance such as internationally applied calculation methods.

  • National annex
    5 pages
    Slovenian language
    sale 10% off
    e-Library read for
    1 day
SIST
oSIST prEN 1997-2:2022(Main)
Eurocode 7 - Geotechnical design - Part 2: Ground properties
prEN 1997-2

1.1   Scope of prEN 1997-2
(1) This document provides rules for determining ground properties for the design and verification of geotechnical structures.
(2) This document covers guidance for planning ground investigations, collecting information about ground properties and groundwater conditions, and preparation of the Ground Model.
(3) This document covers guidance for the selection of field investigation and laboratory test methods to obtain derived values of ground properties.
(4) This document covers guidance on the presentation of the results of ground investigation, including derived values of ground properties, in the Ground Investigation Report.
1.2   Assumptions
(1) The provisions in prEN 1997-2:2022 are based on the assumptions given in prEN 1990:2021 and prEN 1997-1:2022.
(2) This document is intended to be used in conjunction with prEN 1997-1:2022, which provides general rules for design and verification of all geotechnical structures.
(3) This document is intended to be used in conjunction with prEN 1997-3:2022, which provides specific rules for design and verification of certain types of geotechnical structures.
(4) This document is intended to be used in conjunction with prEN 1998-1-1 which provides the requirements for the ground properties needed to define the seismic action.
(5) This document is intended to be used in conjunction with prEN 1998-5 which provides rules for the design of geotechnical structures in seismic regions.

  • Draft
    129 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
oSIST prEN 1997-3:2022(Main)
Eurocode 7 - Geotechnical design - Part 3: Geotechnical structures
prEN 1997-3

1.1   Scope of prEN 1997-3
(1)   This document provides specific rules to be applied for design and verification of geotechnical structures.
1.2   Assumptions
(1)   This document is intended to be used in conjunction with prEN 1990:2021, which establishes principles and requirements for the safety, serviceability, robustness, and durability of structures, including geotechnical structures, and other construction works.
(2)   This document is intended to be used in conjunction with prEN 1997-1:2022, which provides general rules for design and verification of geotechnical structures.
(3)   This document is intended to be used in conjunction with prEN 1997-2:2022, which gives provisions rules for determining ground properties from ground investigation.
(4)   This document is intended to be used in conjunction with the other Eurocodes for the design of geotechnical structures, including temporary geotechnical structures.

  • Draft
    293 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
oSIST prEN 1997-1:2022(Main)
Eurocode 7: Geotechnical design - Part 1: General rules
prEN 1997-1

1.1   Scope of prEN 1997-1
(1)   This document provides general rules for the design and verification of geotechnical structures.
(2)   This document is applicable for the design and verification of geotechnical structures outside the scope of prEN 1997-3:2022.
NOTE   In this case, additional or amended provisions can be necessary.
1.2   Assumptions
(1)   In addition to the assumptions given in prEN 1990:2021, the provisions of prEN 1997:2022 (all parts) assume that:
-   ground investigations are planned by personnel or enterprises knowledgeable about potential ground and groundwater conditions;
-   ground investigations are executed by personnel having appropriate skill and experience;
-   evaluation of test results and derivation of ground properties from ground investigation are carried out by personnel with appropriate geotechnical experience and qualifications;
-   data required for design are collected, recorded, and interpreted by appropriately qualified and experienced personnel;
-   geotechnical structures are designed and verified by personnel with appropriate qualifications and experience in geotechnical design;
-   adequate continuity and communication exist between the personnel involved in data-collection, design, verification and execution.
(2)   This document is intended to be used in conjunction with prEN 1990:2021, which establishes principles and requirements for the safety, serviceability, robustness, and durability of structures, including geotechnical structures, and other construction works.
(3)   This document is intended to be used in conjunction with prEN 1997-2, which gives provisions rules for determining ground properties from ground investigations.
(4)   This document is intended to be used in conjunction with prEN 1997-3, which gives specific rules for the design and verification of certain types of geotechnical structures.
(5)   This document is intended to be used in conjunction with the other Eurocodes for the design of geotechnical structures, including temporary geotechnical structures.

  • Draft
    103 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 1997-1:2005/A1:2014(Amendment)
Eurocode 7: Geotechnical design - Part 1: General rules
EN 1997-1:2004/A1:2013

(1) EN 1997-1 is intended to be used as a general basis for the geotechnical aspects of the design of buildings and civil engineering works.
(2) The following subjects are dealt with in EN 1997-1:
Section 1: General
Section 2: Basis of geotechnical design
Section 3: Geotechnical data
Section 4: Supervision of construction, monitoring and maintenance
Section 5: Fill, dewatering, ground improvement and reinforcement
Section 6: Spread foundations
Section 7: Pile foundations
Section 8: Anchorages
Section 9: Retaining structures
Section 10: Hydraulic failure
Section 11: Overall stability
Section 12: Embankments
(3) EN 1997-1 is accompanied by Annexes A to J, which provide:
- in A: recommended partial safety factor values; different values of the partial factors may be set by the National annex;
- in B to J: supplementary informative guidance such as internationally applied calculation methods.

  • Amendment
    19 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    20 pages
    English language
    sale 10% off
    e-Library read for
    1 day