SIST EN 61987-24-2:2018

Industrial-Process Measurement and Control - Data Structures and Elements in Process Equipment Catalogues - Part 24-2: List of Properties (LOP) of valve/actuator accessories for electronic data exchange (IEC 61987-24-2:2017)

This part of IEC 61987 provides
• an operating list of properties (OLOP) for the description of the operating parameters and
the collection of requirements for accessories attached to automated valves, listed in
Annex A,
• device lists of properties (DLOPs) for accessories attached to automated valves, listed in
Annex B.
The structures of the LOPs conform to the general structures defined in IEC 61987-11 and
IEC 61987-21 as well as the fundamentals for the construction of LOPs defined in
IEC 6198710.
The LOPs conform additionally with terms defined in IEC 60534-7.
Libraries of properties and of blocks used in the LOPs are listed in Annexes C and D
respectively.

Industrielle Leittechnik - Datenstrukturen und -elemente in Katalogen der Prozessleittechnik - Teil 24-2: Merkmalleisten (ML) für Zubehör von Ventilen und Antrieben für den elektronischen Datenaustausch (IEC 61987-24-2:2017)

Mesure et commande dans les processus industriels - Structures de données et éléments dans les catalogues d'équipements de processus - Partie 24-2: Liste de propriétés (LOP) des accessoires d'actionneur/de vanne pour l'échange électronique de données (IEC 61987-24-2:2017

L’IEC 61987-24-2:2017 fournit
- une liste de propriétés fonctionnelles (OLOP) pour la description des paramètres fonctionnels et l'ensemble des exigences pour les accessoires montés sur des vannes automatisées, qui figurent à l'Annexe A,
- des listes de propriétés d'appareils (DLOP) pour les accessoires montés sur des vannes automatisées, qui figurent à l'Annexe B.

Merjenje in nadzor industrijskega procesa - Strukture podatkov in elementi v katalogih procesne opreme - 24-2. del: Seznam lastnost (LOP) za ventile/dajalnike za elektronsko izmenjavo podatkov (IEC 61987-24-2:2017)

Ta del standarda IEC 61987 zajema:
• operativni seznam lastnosti (OLOP) za opis operativnih parametrov in zbirko zahtev za dodatno opremo, priklopljeno na samodejne ventile, navedeno v dodatku A;
• sezname lastnosti naprav (DLOP) za dodatno opremo, priklopljeno na samodejne ventile, navedeno v dodatku B.
Strukture seznamov lastnosti so v skladu s splošnimi strukturami, določenimi v standardih IEC 61987-11 in IEC 61987-21, in z osnovami za konstrukcijo seznamov lastnosti, določenimi v standardu IEC 6198710.
Seznami lastnosti so dodatno v skladu z določili, določenimi v standardu IEC 60534-7.
Knjižnice lastnosti in blokov, uporabljenih v seznamih lastnosti, so navedene v dodatkih C in D.

General Information

• Status: Published
• Publication Date: 10-Jan-2018
• ICS: 01.110 - Technical product documentation
• ICS: 25.040.40 - Industrial process measurement and control
• ICS: 35.240.50 - IT applications in industry
• Technical Committee: MOV - Measuring equipment for electromagnetic quantities
• Current Stage: 6060 - National Implementation/Publication (Adopted Project)
• Start Date: 27-Nov-2017
• Due Date: 01-Feb-2018
• Completion Date: 11-Jan-2018
• Ref Project: EN 61987-24-2:2017 - Industrial-process measurement and control - Data structures and elements in process equipment catalogues - Part 24-2: List of properties (LOPs) of valve/actuator accessories for electronic data exchange

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Merjenje in nadzor industrijskega procesa - Strukture podatkov in elementi v katalogih procesne opreme - 24-2. del: Seznam lastnost (LOP) za ventile/dajalnike za elektronsko izmenjavo podatkov (IEC 61987-24-2:2017)Industrielle Leittechnik - Datenstrukturen und -elemente in Katalogen der Prozessleittechnik - Teil 24-2: Merkmalleisten (ML) für Zubehör von Ventilen und Antrieben für den elektronischen Datenaustausch (IEC 61987-24-2:2017)Mesure et commande dans les processus industriels - Structures de données et éléments dans les catalogues d'équipements de processus - Partie 24-2: Liste de propriétés (LOP) des accessoires d'actionneur/de vanne pour l'échange électronique de données (IEC 61987-24-2:2017Industrial-Process Measurement and Control - Data Structures and Elements in Process Equipment Catalogues - Part 24-2: List of Properties (LOP) of valve/actuator accessories for electronic data exchange (IEC 61987-24-2:2017)35.240.50Uporabniške rešitve IT v industrijiIT applications in industry25.040.40Merjenje in krmiljenje industrijskih postopkovIndustrial process measurement and control01.110L]GHONHTechnical product documentationICS:Ta slovenski standard je istoveten z:EN 61987-24-2:2017SIST EN 61987-24-2:2018en,fr,de01-februar-2018SIST EN 61987-24-2:2018SLOVENSKI
STANDARD



SIST EN 61987-24-2:2018



EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM
EN 61987-24-2
October 2017 ICS 01.110; 25.040.40; 35.240.50
English Version
Industrial-process measurement and control -
Data structures and elements in process equipment catalogues -
Part 24-2: List of properties (LOPs) of valve/actuator accessories for electronic data exchange (IEC 61987-24-2:2017)
Mesure et commande dans les processus industriels - Structures de données et éléments dans les catalogues d'équipements de processus - Partie 24-2: Liste de propriétés (LOP) des accessoires d'actionneur/de vanne pour l'échange électronique de données (IEC 61987-24-2:2017)
Industrielle Leittechnik - Datenstrukturen und -elemente in Katalogen der Prozessleittechnik - Teil 24-2: Merkmalleisten (ML) für Zubehör von Ventilen und Antrieben für den elektronischen Datenaustausch (IEC 61987-24-2:2017) This European Standard was approved by CENELEC on 2017-07-24. CENELEC members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions. CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom. European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique Europäisches Komitee für Elektrotechnische Normung CEN-CENELEC Management Centre: Avenue Marnix 17,
B-1000 Brussels © 2017 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members.
Ref. No. EN 61987-24-2:2017 E SIST EN 61987-24-2:2018



EN 61987-24-2:2017 2 European foreword The text of document 65B/1036/CDV, future edition 1 of IEC 61987-24-2, prepared by SC 65B "Measurement and control devices", of IEC/TC 65 "Industrial-process measurement, control and automation" was submitted to the IEC-CENELEC parallel vote and approved by CENELEC as EN 61987-24-2:2017. The following dates are fixed: • latest date by which the document has to be implemented at national level by publication of an identical national standard or by endorsement (dop) 2018-04-27 • latest date by which the national standards conflicting with the document have to be withdrawn (dow) 2020-10-27
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CENELEC shall not be held responsible for identifying any or all such patent rights. Endorsement notice The text of the International Standard IEC 61987-24-2:2017 was approved by CENELEC as a European Standard without any modification. In the official version, for Bibliography, the following notes have to be added for the standards indicated: IEC 60534-1 NOTE Harmonized as EN 60534-1. IEC 60534-7 NOTE Harmonized as EN 60534-7. IEC 61069-5 NOTE Harmonized as EN 61069-5. IEC 61987-1 NOTE Harmonized as EN 61987-1. IEC 61987-22 NOTE Harmonized as EN 61987-22. IEC 62424 NOTE Harmonized as EN 62424. ISO 80000-1 NOTE Harmonized as EN ISO 80000-1. SIST EN 61987-24-2:2018



EN 61987-24-2:2017 3 Annex ZA (normative)
Normative references to international publications with their corresponding European publications The following documents are referred to in the text in such a way that some or all of their content constitutes requirements of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. NOTE 1 When an International Publication has been modified by common modifications, indicated by (mod), the relevant EN/HD applies. NOTE 2 Up-to-date information on the latest versions of the European Standards listed in this annex is available here: www.cenelec.eu.
Publication Year Title EN/HD Year IEC 61360 series
Standard data element types with associated classification scheme for electric components EN 61360 series
IEC 61360-4-DB -
Standard data element types with associated classification scheme for electric components - Part 4: IEC reference collection of standard data element types and component classes - -
IEC 61987-10 2009
Industrial-process measurement and control - Data structures and elements in process equipment catalogues - Part 10: Lists of Properties (LOPs) for Industrial-Process Measurement and Control for Electronic Data Exchange - Fundamentals EN 61987-10 2009
- -
+ AC 2011
IEC 61987-11 -
Industrial-process measurement and control - Data structures and elements in process equipment catalogues - Part 11: List of properties (LOPs) of measuring equipment for electronic data exchange - Generic structures EN 61987-11 -
IEC 61987-21 2015
Industrial-process measurement and control - Data structures and elements in process equipment catalogues - Part 21: List of Properties (LOP) of automated valves for electronic data exchange - Generic structures EN 61987-21 2016
SIST EN 61987-24-2:2018



SIST EN 61987-24-2:2018



IEC 61987-24-2 Edition 1.0 2017-06 INTERNATIONAL STANDARD NORME INTERNATIONALE Industrial-process measurement and control – Data structures and elements in process equipment catalogues – Part 24-2: Lists of properties (LOPs) of valve/actuator accessories for electronic data exchange
Mesure et commande dans les processus industriels – Structures de données et éléments dans les catalogues d’équipements de processus – Partie 24-2: Listes de propriétés (LOP) des accessoires d'actionneur/de vanne pour l'échange électronique de données
INTERNATIONAL ELECTROTECHNICAL COMMISSION COMMISSION ELECTROTECHNIQUE INTERNATIONALE
ICS 01.110; 25.040.40; 35.240.50
ISBN 978-2-8322-4405-0
® Registered trademark of the International Electrotechnical Commission
Marque déposée de la Commission Electrotechnique Internationale ®
Warning! Make sure that you obtained this publication from an authorized distributor.
Attention! Veuillez vous assurer que vous avez obtenu cette publication via un distributeur agréé. SIST EN 61987-24-2:2018



– 2 – IEC 61987-24-2:2017  IEC 2017 CONTENTS FOREWORD . 3 INTRODUCTION . 5 1 Scope . 6 2 Normative references . 6 3 Terms and definitions . 7 4 General . 7 4.1 Overview. 7 4.2 Depiction of OLOP and DLOPs . 7 4.3 Example of DLOP block usage for a solenoid valve (informative) . 7 Annex A (normative)
Operating list of properties for valve/actuator accessories . 10 Annex B (normative)
Device list of properties for valve/actuator accessories . 11 B.1 DLOP for filter regulator . 11 B.2 DLOP for limit switch . 11 B.3 DLOP for position transmitter . 11 B.4 DLOP for solenoid valve . 12 Annex C (normative)
List of properties for valve/actuator accessories – Property library . 13 Annex D (normative)
List of properties for valve/actuator accessories – Block library . 14 Bibliography . 15
Table 1 – Example for a solenoid valve . 8
SIST EN 61987-24-2:2018



IEC 61987-24-2:2017  IEC 2017 – 3 –
INTERNATIONAL ELECTROTECHNICAL COMMISSION ____________
INDUSTRIAL-PROCESS MEASUREMENT AND CONTROL – DATA STRUCTURES AND ELEMENTS IN PROCESS EQUIPMENT CATALOGUES –
Part 24-2: Lists of properties (LOPs) of valve/actuator accessories
for electronic data exchange
FOREWORD 1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising all national electrotechnical committees (IEC National Committees). The object of IEC is to promote international co-operation on all questions concerning standardization in the electrical and electronic fields. To this end and in addition to other activities, IEC publishes International Standards, Technical Specifications, Technical Reports, Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC Publication(s)”). Their preparation is entrusted to technical committees; any IEC National Committee interested in the subject dealt with may participate in this preparatory work. International, governmental and non-governmental organizations liaising with the IEC also participate in this preparation. IEC collaborates closely with the International Organization for Standardization (ISO) in accordance with conditions determined by agreement between the two organizations. 2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international consensus of opinion on the relevant subjects since each technical committee has representation from all interested IEC National Committees.
3) IEC Publications have the form of recommendations for international use and are accepted by IEC National Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any misinterpretation by any end user. 4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications transparently to the maximum extent possible in their national and regional publications. Any divergence between any IEC Publication and the corresponding national or regional publication shall be clearly indicated in the latter. 5) IEC itself does not provide any attestation of conformity. Independent certification bodies provide conformity assessment services and, in some areas, access to IEC marks of conformity. IEC is not responsible for any services carried out by independent certification bodies. 6) All users should ensure that they have the latest edition of this publication. 7) No liability shall attach to IEC or its directors, employees, servants or agents including individual experts and members of its technical committees and IEC National Committees for any personal injury, property damage or other damage of any nature whatsoever, whether direct or indirect, or for costs (including legal fees) and expenses arising out of the publication, use of, or reliance upon, this IEC Publication or any other IEC Publications.
8) Attention is drawn to the Normative references cited in this publication. Use of the referenced publications is indispensable for the correct application of this publication. 9) Attention is drawn to the possibility that some of the elements of this IEC Publication may be the subject of patent rights. IEC shall not be held responsible for identifying any or all such patent rights. International Standard IEC 61987-24-2 has been prepared by subcommittee 65B: Measurement and control devices, of IEC technical committee 65: Industrial-process measurement, control and automation. The text of this International Standard is based on the following documents: CDV Report on voting 65B/1036/CDV 65B/1065/RVC
Full information on the voting for the approval of this International Standard can be found in the report on voting indicated in the above table. SIST EN 61987-24-2:2018



– 4 – IEC 61987-24-2:2017  IEC 2017 This document has been drafted in accordance with the ISO/IEC Directives, Part 2. A list of all parts in the IEC 61987 series, published under the general title Industrial-process measurement and control – Data structures and elements in process equipment catalogues, can be found on the IEC website. The committee has decided that the contents of this document will remain unchanged until the stability date indicated on the IEC website under "http://webstore.iec.ch" in the data related to the specific document. At this date, the document will be
• reconfirmed, • withdrawn, • replaced by a revised edition, or • amended.
SIST EN 61987-24-2:2018



IEC 61987-24-2:2017  IEC 2017 – 5 –
INTRODUCTION The exchange of product data between companies, business systems, engineering tools, data systems within companies and, in the future, control systems (electrical, measuring and control technology) can run smo
...